Stihl HL 56 K 0176 Product Instruction Manual

Stihl HL 56 K 0176 Manual

Stihl HL 56 K 0176 manual content summary:

  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 1
    HL 56 K { Instruction Manual Manual de instrucciones WARNING Read Instruction Manual thoroughly before use and follow all safety precautions - improper use can cause serious or fatal injury. ADVERTENCIA Antes de usar la máquina lea y siga todas las precauciones de seguridad dadas en el manual de
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 2
    Instruction Manual 1 - 32 Manual de instrucciones 33 - 70
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 3
    Printing inks contain vegetable oils, paper can be recycled. Guide to Using this Manual Safety Precautions and Working Techniques Using the Unit Assembling the Unit Fuel Fueling Starting / Stopping the Engine Operating Instructions Cleaning the Air Filter Engine Management Adjusting the Carburetor
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 4
    fuel pump Filler hole for gear lubricant Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N A bullet marks a step or procedure. A description of a step or procedure
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 5
    apply to the use of all STIHL hedge trimmers. Different models may have different parts and controls. See the appropriate section of your instruction manual for a description of the controls and the function of the parts of your model. Safe use of a hedge trimmer involves 1. the operator 2. the
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 6
    safety devices are working properly. Do not continue operating this machine if it is damaged. In case of doubt, have it checked by your STIHL servicing dealer. THE USE OF THE POWER TOOL Transporting the Power Tool WARNING To reduce the risk of injury from blade contact, never carry or transport
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 7
    damage to the unit. 389BA019 KN Fuel Your STIHL power tool uses an oilgasoline mixture for fuel (see the chapter on "Fuel" of your instruction manual). WARNING Gasoline is an extremely flammable fuel. If spilled and ignited by a spark or other ignition source, it can cause fire and serious burn
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 8
    as possible. See also the "Fueling" chapter in your Instruction Manual for additional information. Before Starting WARNING Always check your equipped with a manual fuel pump). Do not start the engine if there are leaks or damage - risk of fire! Have the machine repaired by a servicing dealer before
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 9
    Do not let the grip snap back, but guide the starter rope to rewind it properly. Failure speed, see the appropriate section of your instruction manual. If you cannot set the correct idle speed a ladder, in a tree or any other insecure support. Never hold the machine above shoulder height. Working
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 10
    benzene) and carbon monoxide, that are known to cause respiratory problems, cancer, birth defects, or other reproductive harm. Some of respirator approved by NIOSH/MSHA for the type of dust encountered. Operating Instructions WARNING Do not operate your power tool using the starting throttle lock or
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 11
    , thereby increasing the risk of fire, burn injury or hearing loss. You may also permanently damage the engine. Have your muffler serviced and repaired by your STIHL servicing dealer only. WARNING The muffler and other parts of the engine (e.g. fins of the cylinder, spark plug) become hot during
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 12
    repair work or cleaning the power tool. Do not attempt any maintenance or repair work not described in your instruction manual. Have such work performed by your STIHL servicing dealer only. Wear gloves when handling or performing maintenance on blades. WARNING Use the specified spark plug and make
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 13
    out of reach of children. Before storing for longer than a few days, always empty the fuel tank. See chapter "Storing the machine" in this manual. Using the Unit Cutting Season Observe country-specific or municipal rules and regulations for cutting hedges. Do not use your hedge trimmer during rest
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 14
    English Horizontal Cut Assembling the Unit Mounting the Loop Handle 7 7 8 82 388BA032 KN 0000-GXX-1767-A0 0000-GXX-1853-A0 3 Hold the cutter bar at an angle of 0° to 10° as you swing the hedge trimmer horizontally. Swing the cutter bar in an arc towards the outside of the hedge so that the
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 15
    this reason STIHL recommends that you use only quality unleaded gasoline! NOTICE Gasoline with an ethanol content of more than 10% can cause running problems and major damage in engines and should not be used. For further details, see www.STIHLusa.com/ethanol The ethanol content in gasoline affects
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 16
    machine's idle speed is incorrectly adjusted, have your authorized STIHL servicing dealer check your machine and make the proper adjustments and repairs content to a fuel with a much higher or lower ethanol content. This problem can be avoided by always using fuel with the same ethanol content. To
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 17
    Fueling Preparations Opening the threaded filler cap English Starting / Stopping the Engine Controls 31 002BA447 KN 545BA002 KN N Before fueling, clean the filler cap and the area around it to ensure that no dirt falls into the tank. Always thoroughly shake the mixture in the canister before
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 18
    cold. Cranking 547BA015 KN 547BA018 KN N Press the manual fuel pump bulb (4) at least five times - even the ground: It must rest securely on the engine support and the gearbox housing. N If fitted: Remove blade Do not let the starter grip snap back. Guide it slowly back into the housing so that the
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 19
    engine runs. Fuel tank run until completely dry N After refueling, press the manual fuel pump bulb at least five times - even if the bulb is to suit the engine temperature. N Now start the engine. English Operating Instructions During break-in period A factory-new machine should not be run at
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 20
    English Cleaning the Air Filter If there is a noticeable loss of engine power 3 2 1 N Move the choke lever (1) to
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 21
    when the engine is idling, have your power tool checked and repaired by your servicing dealer. A N Clean the spark plug if it is dirty N Check the " N Use only resistor type spark plugs of the approved range Correct the problems that have caused fouling of the spark plug: - too much oil in fuel
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 22
    clean and the carburetor is properly adjusted, the cause may be the muffler. Have the muffler checked for contamination (carbonization) by your Blade Drive Gear servicing dealer. Lubricate the blade drive gear with STIHL recommends that you have STIHL gear lubricant for hedge trimmers
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 23
    Sharpening Instructions When cutting performance and behavior begin to deteriorate, i.e. blades frequently snag on branches: Resharpen the cutting blades. It is best to have the cutting blades resharpened by a dealer on a workshop sharpener. STIHL recommends an authorized STIHL servicing dealer
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 24
    after each refueling stop weekly monthly every 12 months if problem if damaged as required Visual inspection (condition, leaks) X Manual fuel pump (if fitted) Pickup body in fuel tank Check X Have repaired by servicing dealer1) Have checked by servicing dealer1) Have replaced by servicing
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 25
    . Cutting blades Visual inspection Clean 2) Sharpen2) Gearbox lubrication Check Replenish Safety labels Replace 1) STIHL recommends an authorized STIHL servicing dealer. 2) Spray with STIHL resin solvent after cleaning X X X X before starting work after finishing work or daily after each
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 26
    1 Loop Handle 2 Stop Switch 3 Throttle Trigger Lockout 4 Throttle Trigger 5 Carburetor Adjusting Screws 6 Choke Lever 7 Air Filter Cover 8 Spark Plug Boot 9 Machine Support 10 Manual Fuel Pump 11 Fuel Filler Cap 12 Fuel Tank 13 Starter Grip 14 Muffler with Spark Arresting Screen 15 Cutting Blades 16
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 27
    Cover Covers and protects the air filter element. 8 Spark Plug Boot Connects the spark plug with the ignition lead. 9 Machine Support For resting machine on the ground. 10 Manual Fuel Pump Provides additional fuel feed for a cold start. 11 Fuel Filler Cap For closing the fuel tank. 12 Fuel Tank
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 28
    and Repairs Users of this unit should carry out only the maintenance operations described in this manual. STIHL recommends that other repair work be performed only by authorized STIHL servicing dealers using genuine STIHL replacement parts. Genuine STIHL parts can be identified by the STIHL part
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 29
    the performance of the required maintenance listed in your instruction manual. STIHL Incorporated recommends that you retain all receipts for presenting your small off-road equipment engine to a STIHL service center as soon as a problem exists. The warranty repairs will be completed in a reasonable
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 30
    information about your product, but it is not required in order to obtain warranty service. If any emission-related part on your engine is defective, the part will Mechanical diagnostic work will be performed at an authorized STIHL servicing dealer. Emission test may be performed either at STIHL
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 31
    for performance of the required maintenance listed in your instruction manual. STIHL Incorporated recommends that you retain all receipts presenting your small off-road equipment engine to a STIHL servicing dealer as soon as the problem exists. The warranty repairs should be completed in a
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 32
    COVERAGE BY STIHL INCORPORATED, see above. A statement in such written instructions to the effect of "repair or replace as necessary" will not reduce Work STIHL Incorporated shall remedy warranty defects at any authorized STIHL servicing dealer or warranty station. Any such work shall be free of
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 33
    ), Fuel Tank, Fuel Cap, Fuel Line, Fuel Line Fittings, Clamps, Fasteners. Where to make a Claim for Warranty Service Bring the STIHL product to any authorized STIHL servicing dealer. Limitations The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 34
    English STIHL OUTFITTERS ™ STIHL PICCO ™ STIHL PolyCut ™ STIHL PowerSweep ™ STIHL Precision Series ™ STIHL RAPID ™ STIHL SuperCut ™ TapAction ™ TrimCut ™ This listing of trademarks is subject to change. Any unauthorized use of these trademarks without the express written consent of ANDREAS STIHL AG
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 35
    con su representante de STIHL o el distribuidor de STIHL para su zona si no se entiende alguna de las instrucciones dadas en el presente manual. ADVERTENCIA Dado que el cortasetos es una herramienta de corte de gran velocidad, es necesario tomar medidas especiales de seguridad para reducir el riesgo
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 36
    siguientes pueden aparecer en su máquina. Tanque de combustible que contiene la mezcla de combustible y aceite Presione para accionar la bomba manual de combustible Orificio de llenado para lubricante de engranajes Símbolos en el texto Muchas de las instrucciones de uso y seguridad vienen acompa
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 37
    refieren al uso de todos los cortasetos STIHL. Los distintos modelos pueden contar con piezas y controles diferentes. Vea la sección correspondiente de su manual de instrucciones para tener una descripción de los controles y la función de los componentes de su modelo. El uso seguro de un cortasetos
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 38
    español / EE.UU Todas las precauciones antes mencionadas no le garantizan que va a estar totalmente protegido contra la enfermedad de Raynaud o el síndrome del túnel carpiano. Por lo tanto, los operadores constantes y regulares deben revisar con frecuencia el estado de sus manos y dedos. Si aparece
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 39
    combustible y el daño a la máquina. Combustible La herramienta motorizada STIHL utiliza una mezcla de aceite-gasolina como combustible (vea el capítulo "Combustible" en el manual del propietario). HL 56 K 37
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 40
    , apriete la tapa de llenado de combustible a mano tan firmemente como sea posible. Consulte también el capítulo "Combustible" del Manual de instrucciones para obtener información adicional. Antes de arrancar ADVERTENCIA Siempre revise la herramienta motorizada para comprobar que está en buenas
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 41
    ) del lugar en que lo haya llenado. español / EE.UU Para las instrucciones específicas de arranque, vea la sección correspondiente en el manual del usuario. Coloque la herramienta motorizada sobre suelo firme u otra superficie sólida en un lugar abierto. Mantenga el equilibrio y elija un buen punto
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 42
    de corte no debe moverse. Para instrucciones acerca de cómo ajustar el régimen de marcha en vacío, vea la sección correspondiente del manual de instrucciones. Si no puede regular correctamente la marcha en vacío, pida a su concesionario STIHL que revise la herramienta motorizada y haga los
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 43
    nieve) y en terreno difícil y con mucha vegetación. Para evitar tropezarse, esté atento a los obstáculos ocultos tales como tocones, raíces y zanjas. Para obtener un punto de apoyo seguro, quite las ramas caídas, los matorrales y el material cortado. Sea sumamente precavido cuando trabaje en
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 44
    español / EE.UU Al aumentar la velocidad del motor con las cuchillas bloqueadas se aumenta la carga y se provoca el patinaje continuo del embrague. Esto puede causar sobrecalentamiento y daño de los componentes importantes (por ejemplo, el embrague y las piezas de plástico polimérico de la caja) -
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 45
    permanentemente el motor. Haga reparar el silenciador únicamente por el concesionario de servicio STIHL. ADVERTENCIA El silenciador y otros componentes del motor (por ej., aletas del cilindro, bujía) se calientan durante el funcionamiento y permanecen calientes por un buen rato después de apagar el
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 46
    , reparación o limpieza de la herramienta motorizada. No intente hacer ningún trabajo de mantenimiento o reparación que no esté descrito en su manual de instrucciones. Este tipo de trabajo debe ser realizado únicamente por el concesionario de servicio de STIHL. Use guantes para manipular o reparar
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 47
    un período de más de algunos días, siempre vacíe el tanque de combustible. Consulte el capítulo "Almacenamiento de la máquina" en este manual. Uso Temporada de corte Respete las leyes y los reglamentos nacionales o municipales en cuanto al corte de setos. No utilice el cortasetos durante los per
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 48
    388BA032 KN 0000-GXX-1767-A0 0000-GXX-1853-A0 español / EE.UU Corte horizontal Armado de la máquina Montaje del mango tórico 7 7 8 82 3 Sujete la barra de corte a un ángulo de 0° a 10° al desplazar el cortasetos en sentido horizontal. Desplace la barra de corte describiendo un arco hacia
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 49
    N Alinee el mango tórico (2) y colóquelo en la posición más cómoda. N Apriete los tornillos firmemente. Montaje de la caja de engranajes 11 10 10 5 N Suelte los tornillos de fijación (10). N Empuje la caja de engranajes (11) en el tubo de mando (5) y gire la caja de engranajes (11) hacia
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 50
    español / EE.UU INDICACIÓN La gasolina con un contenido de etanol mayor que el 10% puede causar problemas de funcionamiento y averías graves en motores, por lo cual no debe utilizarse. Consulte www.STIHLusa.com/ethanol para mayor información El contenido de etanol en la gasolina afecta el régimen
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 51
    guarde por más de 30 días. Guárdelo únicamente en envases aprobados para combustible. Para el proceso de mezclado, vierta el aceite en el envase primero y luego agregue la gasolina. Cierre el envase y agítelo vigorosamente a mano para asegurar que se mezclen bien el aceite y la gasolina. Gasolina
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 52
    . El sistema de encendido se activa otra vez después de apagar el motor. 545BA002 KN N Oprima el bulbo (4) de la bomba de combustible manual por lo menos cinco veces, aunque el bulbo esté lleno de combustible. Motor frío (arranque en frío) 5 N Empujar la palanca del estrangulador (5) y gírela
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 53
    Motor caliente (arranque en caliente) 5 N Empujar la palanca del estrangulador (5) y gírela a < al mismo tiempo. También utilice esta posición si el motor ha estado en marcha, pero todavía se encuentra frío. Arranque 547BA017 KN N Asegúrese de tener los pies bien apoyados - ya sea de estar a pie,
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 54
    español / EE.UU Parada del motor N Mueva el interruptor de parada hacia 0 - el motor se para - suelte el interruptor de parada - el mismo regresa a la posición de marcha. Sugerencias adicionales para el arranque El motor se cala en la posición de arranque en frío g o durante la aceleración. N Mueva
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 55
    intervalos de almacenamiento por tiempo prolongado - vea "Almacenamiento de la máquina". Limpieza del filtro de aire Si se nota una pérdida considerable de la potencia del motor 3 2 1 N Ponga la palanca del estrangulador (1) en
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 56
    español / EE.UU Gestión del motor Ajuste del carburador Las emisiones de gases de escape son controladas por el diseño de parámetros y componentes fundamentales del motor (por ej. carburación, encendido, regulación y regulación de las válvulas o la lumbrera) sin la adición de ningún equipo
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 57
    Bujía Revisión de la bujía español / EE.UU 547BA041 KN 000BA039 KN 0000-GXX-1830-A0 Si el motor pierde potencia, es difícil arrancarlo o funciona de modo irregular a marcha en vacío, revise la bujía primero. Instale una bujía nueva después de aprox. 100 horas de funcionamiento, o más temprano si
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 58
    español / EE.UU Instalación de la bujía N Atornille la bujía en el cilindro. N Presione el casquillo firmemente sobre la bujía Funcionamiento del motor Si el funcionamiento del motor es insatisfactorio aunque el filtro de aire está limpio y el carburador ha sido debidamente ajustado, la causa puede
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 59
    N Destornille el tubo de grasa del agujero de llenado. N Vuelva a colocar el tapón de llenado y apriételo firmemente. Instrucciones de afilado Si el rendimiento del corte y la respuesta de la máquina comienzan a deteriorar (por ejemplo, si las cuchillas se enganchan frecuentemente en las ramas):
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 60
    español / EE.UU Inspección y mantenimiento por el concesionario Chispero en silenciador N Si el motor pierde potencia, revise el chispero del silenciador. STIHL recomienda que un concesionario STIHL autorizado efectúe los trabajos de mantenimiento y reparación. 58 HL 56 K
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 61
    dañadas X Mango de control Comprobar el funcionamiento X X Inspección visual Filtro de aire Limpiar Reemplazar Revisar X Bomba de combustible manual (si la tiene) Solicitar al concesionario de servicio su reparación1) Recogedor en depósito de combustible Solicitar al concesionario de
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 62
    español / EE.UU Los intervalos que se indican a continuación corresponden únicamente a condiciones normales de funcionamiento. Si la jornada diaria es más prolongada que lo normal, o bien si las condiciones son extremas (zonas con demasiado polvo, etc.), acorte apropiadamente los intervalos
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 63
    de ajuste del carburador 6 Palanca del estrangulador 7 Cubierta del filtro de aire 8 Casquillo de bujía 9 Apoyo de la máquina 10 Bomba de combustible manual 11 Tapa de llenado de combustible 12 Tanque de combustible 13 Mango de arranque 14 Silenciador con chispero 15 Cuchillas de corte 16 Engranaje
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 64
    de bujía Conecta la bujía al alambre de encendido. 9 Apoyo de la máquina Para apoyar la máquina en el suelo. 10 Bomba de combustible manual Suministra alimentación adicional de combustible para el arranque en frío. 11 Tapa de llenado de combustible Para tapar el depósito de combustible. 12 Tanque
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 65
    pequeñas. Para reparar algún componente del sistema de control de emisiones de aire, consulte la garantía de sistemas de emisiones dada en este manual. Desecho Respete todas las leyes y los reglamentos sobre eliminación de desechos que correspondan a su país. No se debe botar los aparatos STIHL en
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 66
    motor pequeño para equipo de uso fuera de carretera, usted tiene la responsabilidad de realizar el mantenimiento requerido descrito en su manual de instrucciones. STIHL Incorporated le recomienda guardar todos los recibos comprobantes de los trabajos de mantenimiento hechos a su motor pequeño para
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 67
    recibos o del incumplimiento del propietario de realizar todos los trabajos de mantenimiento programados. El uso de cualquier pieza de repuesto o servicio cuyo comportamiento y durabilidad sean equivalentes está permitido en trabajos de mantenimiento o reparación no contemplados en la garantía, y no
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 68
    bajo garantía Lleve el producto a un centro de servicio de STIHL en su localidad. Requerimientos de mantenimiento Las instrucciones presentadas en este manual se basan en la aplicación de la mezcla recomendada para motores de 2 tiempos (vea también la instrucción "Combustible"). Las discrepancias de
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 69
    motor pequeño para equipo de uso fuera de carretera, usted tiene la responsabilidad de realizar el mantenimiento requerido descrito en su manual de instrucciones. STIHL Incorporated le recomienda guardar todos los recibos comprobantes de los trabajos de mantenimiento hechos a su motor pequeño para
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 70
    español / EE.UU Período de garantía contra defectos Los períodos de garantía comenzarán el día en que el motor de equipo utilitario es comprado por el comprador inicial. Si cualquier componente relacionado con el sistema de control de emisiones está defectuoso, el mismo será sustituido por STIHL
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 71
    combinación de colores anaranjadogris (Números de registro EE.UU. 2,821,860; 3,010,057, 3,010,058, 3,400,477; y 3,400,476) AutoCut® FARM BOSS® iCademy® MAGNUM® MasterWrench Service® MotoMix® OILOMATIC® HL 56 K 69
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 72
    español / EE.UU Rock Boss® STIHL Cutquik® STIHL DUROMATIC® STIHL Quickstop® STIHL ROLLOMATIC® STIHL WOOD BOSS® TIMBERSPORTS® WOOD BOSS® YARD BOSS® Algunos de las marcas comerciales de STIHL por ley común STIHL InjectionTM STIHL M-Tronic ™ STIHL OUTFITTERS ™ STIHL PICCO ™ STIHL PolyCut ™ STIHL
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 73
    español / EE.UU HL 56 K 71
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 74
    español / EE.UU 72 HL 56 K
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 75
  • Stihl HL 56 K 0176 | Product Instruction Manual - Page 76
    WARNING This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 0458-569-
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

{
STIHL HL 56 K
WARNING
Read Instruction Manual thoroughly
before use and follow all safety
precautions – improper use can
cause serious or fatal injury.
ADVERTENCIA
Antes de usar la máquina lea y siga
todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.
Instruction Manual
Manual de instrucciones