Stihl MS 441 R C-M MAGNUM Product Instruction Manual

Stihl MS 441 R C-M MAGNUM Manual

Stihl MS 441 R C-M MAGNUM manual content summary:

  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 1
    STIHL MS 441 C-M { Instruction Manual Manual de instrucciones Warning! This saw is capable of severe kickback which may cause serious or fatal injury. Only for users with extraordinary cutting needs and experience and training dealing with kickback. Chainsaws with significantly reduced kickback
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 2
    Instruction Manual 1 - 57 Manual de instrucciones 59 - 121
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 3
    any of the instructions in this manual. Warning! Because a chain saw is a high-speed wood-cutting tool, some special safety precautions must be observed as with any other power saw to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. { MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 4
    are made from time to time. Therefore, some changes, modifications and improvements may not be covered in this manual. If the operating characteristics or the appearance of your machine differs from those described in this manual, please contact your STIHL dealer for assistance. 2 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 5
    Warning! Do not use it for other purposes, since misuse may result in personal injury or property damage, including damage to the machine all STIHL chain saws. Different models may have English different parts and controls. See the appropriate section of your instruction manual for . MS 441 C-M 3
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 6
    above symptoms appear, seek medical advice immediately. Warning! The ignition system of the STIHL unit produces an electromagnetic field of a very low intensity. This field may interfere is very important. Wear sturdy boots with nonslip soles. Steel-toed safety boots are recommended. 4 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 7
    checked by your STIHL servicing dealer. THE USE the chain and guide bar before transporting STIHL power tool uses an oilgasoline mixture for fuel (see the chapter on "Fuel" of your instruction manual). For illustrations and definitions of the power tool parts see the chapter on "Main Parts." MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 8
    vapor may escape from the fuel system. Fueling Instructions Warning! Fuel your power tool in well-ventilated fuel tank opening. To do this with this STIHL cap, raise the grip on the top of the top) to the closed position. Such misalignment can result from handling, cleaning or an improper attempt at
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 9
    boot may cause arcing that could ignite combustible fumes and cause a fire. For proper assembly of the bar and chain follow the procedure described in the chapter "Mounting the Bar and Chain" of your instruction manual. STIHL Oilomatic chain, guide from the fueling spot, outdoors only. MS 441 C-M 7
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 10
    chain brake is engaged (see "Chain Brake" chapter in your instruction manual) and place the chain saw on firm ground or other guide the starter rope to rewind it properly. Failure to follow this procedure may result in injury to your hand or fingers and may damage the starter mechanism. 8 MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 11
    not move. If your power tool shows an incorrect idle adjustment, have your STIHL dealer check your power tool and make proper adjustments and repairs. During Operation Holding on a ladder or any other insecure support. Never hold the machine above shoulder height. Do not overreach. MS 441 C-M 9
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 12
    such as unburned hydrocarbons (including benzene) and carbon monoxide, that are known to cause respiratory problems, cancer, birth defects, or other reproductive harm. Some of the gases (e.g. carbon monoxide wear a respirator approved by NIOSH / MSHA for the type of dust encountered. 10 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 13
    your employer or a local OSHA representative. Operating Instructions Warning! Do not operate your power tool cut or the chain brake is engaged. It can result in overheating and damage to important components (e.g. clutch, serviced and repaired by your STIHL servicing dealer only. MS 441 C-M 11
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 14
    a clogged screen, have your muffler maintained by a STIHL servicing dealer. Reactive Forces Including Kickback Warning! Reactive forces may or is pinched, the reactive forces may occur instantly. These reactive forces may result in loss of control, which, in turn, may cause serious or fatal MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 15
    results from instruction manual STIHL servicing dealer. Do not use the saw until the problem has been rectified. STIHL Quickstop Chain Brake STIHL has developed a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a Quickstop chain brake. MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 16
    chain brake. When a kickback occurs, the guide bar may rotate around the front handle. If order. See the chapter of your instruction manual entitled "Chain Brake" and the section result in higher kickback tendency. STIHL has developed a color code system to help you identify the STIHL MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 17
    but they are designed to reduce the risk of kickback injury. They are available from your STIHL dealer. Warning! Even if your saw is equipped with a Quickstop, a reduced kickback bar lengths listed in the specifications chapter of the instruction manual for your chain saw powerhead. MS 441 C-M 15
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 18
    guide on any STIHL chain saw. Any chain saw equipped with a bow guide is potentially very dangerous. The risk of kickback is increased with a bow guide when used on a bow guide. To avoid kickback The best protection from personal injury that may result from kickback is to avoid . 16 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 19
    the operator. When felling on a slope, the operator should stand on the uphill side if possible. Felling Instructions 1 1/2 1 21/2 When felling, maintain a distance of at least 2 1/2 tree lengths from the equipment a safe distance away from the tree, but not on the escape paths. MS 441 C-M 17
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 20
    to a depth of about 1/5 to 1/4 of the trunk diameter. N Make second cut horizontal. N Remove resulting 45° piece. Felling notch (C) - determines the direction of the fall For an open-face cut: N Make second cut from below at approx. 40 degree angle. N Remove resulting 90° piece. 18 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 21
    sides of the trunk, at same height as subsequent felling cut. N Cut to no more than width of guide bar. This is especially important in softwood in summer - it helps prevent sapwood splintering when the tree falls. be of wood or plastic - never steel, which can damage the chain. MS 441 C-M 19
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 22
    of the guide bar requires guide bar and can result in kickback. Only properly trained professionals should attempt these techniques. Sectioning Method For the sectioning method make the first part of the felling cut with the guide keep the guide bar fully length of the guide bar requires the
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 23
    and avoid contacting the log or other limbs with the nose of the guide bar. English Do not stand on a log while limbing it - limbing by leaving the lower limbs to support the log off the ground. When underbucking freely hanging limbs, a pinch may result or the limb may fall, causing MS 441 C-M 21
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 24
    instructions in the appropriate section of your instruction manual. Please refer to the maintenance chart in 1 this manual. 001BA152 KN When cutting small logs, place log through "V" - shaped supports in your instruction manual. Have such work performed by your STIHL servicing dealer MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 25
    maintenance chart and to the limited warranty statement near the end of the instruction manual. Store chain saw in a dry place and away from children. Before storing for longer than a few days, always empty the fuel tank (see chapter "Storing the Machine" in the instruction manual). MS 441 C-M 23
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 26
    English Cutting Attachment STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets. A cutting attachment consists of the saw chain, guide bar and chain cutters. N Fit the chain - start at the bar nose. 143BA003 KN 24 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 27
    24 Tensioning the Chain English Checking Chain Tension 001BA187 KN 133BA024 KN 143BA007 KN N Fit the guide bar over the studs (1) - the cutting edges on the top of the bar must point use for some time. N Check chain tension frequently - see chapter on "Operating Instructions". MS 441 C-M 25
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 28
    STIHL recommends that you use only high-quality unleaded gasoline! Gasoline with an ethanol content of more than 10% can cause running problems and major damage in engines with a manually STIHL HP Ultra 2-Cycle Engine Oil since it is specially formulated for use in STIHL Gasoline Oil (STIHL 50:1 or
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 29
    (approx. 1/4 turn). N Fold down the grip. 001BA222 KN 001BA218 KN 001BA220 KN N Raise the grip into an upright position. With grip in an upright position: MS 441 C-M 27
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 30
    STIHL Bioplus) since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive, clutch and chain. It may even cause the oil pump to seize. The service life of the chain and guide chain lubrication. 28 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 31
    problem in the oil supply system: Check chain lubrication, clean the oil passages, contact your servicing dealer for assistance if necessary. STIHL Refill the chain oil tank when the fuel tank is approximately half empty MS 441 C-M The saw chain must always throw off a small amount of oil.
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 32
    brake is subject to normal wear. It is necessary to have it serviced and maintained regularly by trained personnel, such as your STIHL servicing dealer, at the following intervals: Full-time usage: Part-time usage: Occasional usage: every 3 months every 6 months every 12 months 30 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 33
    with screws (2) When the mounting kit is used, the slide must be in the winter position. If engine trouble occurs, first check whether use of the cover plate is necessary. 219BA046 KN N turn slide (2) from is pre-heated by the preheater plate - this helps prevent carburetor icing. MS 441 C-M 31
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 34
    Master Control lever from the operating position F to Start }, press and hold down the throttle trigger lockout and throttle trigger simultaneously - set Master Control 32 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 35
    the way - risk of breakage! Do not let the starter grip snap back - guide it vertically back into the housing so that the starter rope can rewind properly With without an additional manual fuel pump, it may be necessary to pull the starter rope several times - to prime the fuel line. MS 441 C-M 33
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 36
    is off. Increased engine speeds with the chain brake on (saw chain is stationary) will quickly damage the clutch and chain brake. 001BA186 KN 34 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 37
    " N Move the Master Control lever to the operating position F N Hold and start the chain saw Operating Instructions During the break-in period A factory new machine should not be run at high revs (full throttle off until you need it again. Long-term storage See "Storing the machine" MS 441 C-M 35
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 38
    Quantity Control Oil pump with increased delivery rate (available option) Taking Care of the Guide Bar 001BA157 KN 143BA026 KN Varying cutting lengths, types of wood and working techniques require scale on the filing gauge (special accessory) - in the area used most for cutting. 36 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 39
    use STIHL filters dry Fouled air filters will impair engine performance, increase fuel consumption and make the machine more difficult to start. 001BA212 KN 001BA211 KN N HD air filter (black filter housing) with felt prefilter for normal, dry or very dusty operating environments MS 441 C-M 37
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 40
    air from the inside outwards In case of stubborn dirt or stuck filter fabric N Wash the filter in STIHL specialpurpose cleaner (special accessory) or a clean, nonflammable cleaning liquid (e. g., warm soapy water) - (2) clean and blow through compressed air from the inside outwards 38 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 41
    stuck filter fabric N Wash the filter in STIHL specialpurpose cleaner (special accessory) or a clean, operating conditions. Manual carburetor adjustments are service life. Thus it should be replaced at shorter intervals than the HD filter. Always replace a damaged filter. N Reinstall filter MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 42
    deposits to form on the insulator nose which may result in trouble in operation. Removing the spark plug N Move the problems which have caused fouling of spark plug: - Too much oil in fuel mix. - Dirty air filter. - Unfavorable running conditions, e.g. operating at part load. 000BA039 KN 40 MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 43
    To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press spark plug boot (1) snugly onto spark plug terminal (2) of the proper size. (Note: If terminal from the starter post. N Carefully remove the rope rotor with washer (3) and pawls (4). MS 441 C-M 41
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 44
    the top of the starter grip. 213BA019 KN 5 6 7 N Thread the end of the rope through the top of the guide bushing (5) and rope rotor (6) and secure it with a simple overhand knot. N Coat the rope rotor bearing bore with N Release the rope slowly so that it winds onto the rotor. 42 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 45
    in the guide bushing. If carburetor diaphragms sticking together. N Remove the saw chain and guide bar, clean them and spray with corrosion inhibiting oil. air filter. N If you use a biological chain and bar lubricant, e.g. STIHL BioPlus, completely fill the chain oil tank. N Store the machine in a
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 46
    ) - otherwise the service life of the saw chain is reduced - use check gauge (special accessory) to test Using two saw chains in alternation helps preserve the chain sprocket. Use only STIHL original chain sprockets to toward the outside N Refit washer and E-clip on the crankshaft 44 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 47
    quickly and finally break. As these requirements can be met only after sufficient and constant practice: N Use a file holder A file holder must be used for manual resharpening (see table "Sharpening Tools"). The correct filing angles are marked on the file holder. MS 441 C-M 45
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 48
    are usually enough. N Hold the file horizontally (at a right angle to the side of the guide bar) and file according to the angles marked on the file holder. Rest the file holder on ) Depth gauge setting (a) mm (inch) 0,65 (0.026) 0,65 (0.026) 0,65 (0.026) 0,65 (0.026) 0,80 (0.031) 46 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 49
    gauge until it is level with the filing gauge. N File the top of the depth gauge parallel to the stamped service marking (see arrow) - but do not lower the highest point of the depth gauge in this process. The kickback 007 1027 5605 007 1027 5605 007 1028 5605 007 1029 5605 007 1030 MS 441 C-M 47
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 50
    Saw chain Guide bar Chain sprocket Air filter visual inspection (condition, leaks) clean Check operation Check operation have them checked by a servicing dealer1)2) check clean replace X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 48 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 51
    sticker replace X 1) STIHL recommends STIHL servicing dealers 2) see "chain brake" 3) During initial use of chain saws (with a power output of 3.4 kW or more), tighten the cylinder block screws after 10 to 20 hours of operation 4) present only in some countries MS 441 C-M X X X X X X X 49
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 52
    with Clips 2 Handle Heating Switch (Depending on Model) 3 Spark Plug Boot 4 Shutter (Summer and Winter Operation) 5 Decompression Valve (Automatically Resetting) Cover 9 Chain Catcher 10 Chain Tensioner 11 Bumper Spike 12 Guide Bar 13 Oilomatic Saw Chain 14 Oil Filler Cap 15 Muffler MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 53
    switching the electric handle heating on and off. 3 Spark Plug Boot Connects the spark plug with the ignition lead. 4 Shutter (Summer Spike Toothed stop for holding saw steady against wood. 12 Guide Bar Supports and guides the saw chain. 13 Oilomatic Saw Chain A loop consisting ) MS 441 C-M 51
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 54
    gap: NGK BPMR 7 A, Bosch WSR 6 F 0.02 in. (0.5 mm) 52 Rollomatic E guide bars STIHL reduced kickback guide bars (with green label) Bar lengths: 16, 18, 20, 25 in (40, 45, may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 55
    to normal wear and tear. When purchasing these parts, always quote the saw model, the part numbers and names of the parts. Model Serial number Guide bar part number Chain part number See "Specifications" in this manual for the recommended reduced kickback cutting attachments. MS 441 C-M 53
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 56
    responsible for the performance of the required maintenance listed in your instruction manual. STIHL Incorporated recommends that you retain all receipts covering maintenance on your responsible for presenting your small off-road equipment engine to a STIHL service center as soon as a 54 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 57
    Fasteners Where to make a Claim for Warranty Service Bring the product to any authorized STIHL servicing dealer and present the signed warranty card. Maintenance Requirements The maintenance instructions in this manual are based on the application of the recommended 2-stroke fuel-oil MS 441 C-M 55
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 58
    ™ Micro™ Pro Mark™ Quad Power™ Quiet Line™ STIHL Compact™ STIHL HomeScaper Series™ STIHL Interchangeable Attachment Series™ STIHL M-Tronic™ STIHL Magnum™ STIHL MiniBoss™ STIHL MotoPlus 4™ STIHL Multi-Cut HomeScaper Series™ STIHL OUTFITTERS™ STIHL PICCO™ STIHL PolyCut™ STIHL PowerSweep™ MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 59
    Series™ STIHL Protech™ STIHL RAPID™ STIHL SuperCut™ STIHL Territory™ TapAction™ TrimCut™ This listing of trademarks is subject to change. Any unauthorized use of these trademarks without the express written consent of ANDREAS STIHL AG & Co. KG, Waiblingen is strictly prohibited. MS 441 C-M English
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 60
    English 58 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 61
    papel es reciclable. Impreso en papel libre de cloro. Acerca de este manual de instrucciones 60 Medidas de seguridad y técnicas de manejo 61 Accesorio puede causar lesiones graves e incluso mortales. { MS 441 C-M 59 © ANDREAS STIHL AG & Co. KG, 2011 0458-557-8621-A. M0-9.
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 62
    tanto, es posible que algunos cambios, modificaciones y mejoras no se describen en este manual. Si las características de funcionamiento o la apariencia de su máquina difieren de las descritas en este manual, comuníquese con el concesionario STIHL para obtener la ayuda que requiera. 60 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 63
    La mayoría de las medidas de seguridad y avisos contenidos en este manual se refieren al uso de todas las motosierras de STIHL. Los distintos modelos pueden contar con piezas y controles diferentes. Vea visibilidad, destreza o juicio. No maneje esta máquina cuando está fatigado. MS 441 C-M 61
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 64
    síndrome del túnel carpiano, sírvase notar lo siguiente: - La mayor parte de las herramientas motorizadas de STIHL se ofrecen con un sistema antivibración ("AV") cuyo propósito es reducir la transmisión de las vibraciones de lesiones el operador debe usar el equipo protector adecuado. 62 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 65
    Z 87.1 (o la norma nacional correspondiente). Para reducir el riesgo de lesionarse la cara, STIHL recomienda usar también una careta o protector facial adecuado sobre las gafas o anteojos de seguridad. ñada. En caso de dudas, pida que el concesionario de servicio de STIHL la revise. MS 441 C-M 63
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 66
    de usted. 001BA115 KN Combustible La herramienta motorizada STIHL utiliza una mezcla de aceite-gasolina como combustible (vea el capítulo "Combustible" en el manual del propietario). Advertencia! La gasolina es un El tipo de tapa de llenado difiere con los distintos modelos. 64 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 67
    la posición correcta y apriétela en la boca de llenado del tanque. Para hacer esto con esta tapa STIHL, levante la empuñadura en la parte superior de la tapa hasta dejarla vertical a un ángulo de 90°. , la misma podría estar averiada o rota; ponga la máquina fuera de servicio de MS 441 C-M 65
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 68
    descrito en el capítulo "Montaje de la espada y la cadena" del manual de instrucciones. La cadena Oilomatic, la espada y la rueda dentada STIHL deben coincidir entre sí en cuanto a calibre y paso. Antes de cambiar instrucciones específicas de arranque, vea la sección correspondiente del MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 69
    cadena esté aplicado (vea el capítulo "Freno de la cadena" en el manual de instrucciones) y apoye la motosierra sobre terreno firme u otra superficie sólida reducir este riesgo, siempre aplique el freno de la cadena STIHL Quickstop por medio del protector delantero de la mano antes . MS 441 C-M 67
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 70
    que el régimen de marcha en vacío está mal regulado, pida a su representante de STIHL que revise la herramienta motorizada y haga los ajustes o reparaciones correspondientes. Durante el trabajo Sujeción y amortiguar mejor las fuerzas de empuje y tirones, así como las fuerzas de 68 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 71
    de trabajo para obtener ventilación adecuada antes de proceder y/o tome descansos frecuentes para permitir la disipación de los gases antes de que se puedan concentrarse. MS 441 C-M 69
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 72
    o salirse. Para reducir el riesgo de lesiones personales, no maneje la motosierra si el gancho de la cadena está dañado o se ha perdido. 70 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 73
    cualquier duda acerca de la sustitución de los elementos antivibración, consulte a su concesionario de servicio STIHL. Advertencia! La motosierra no está diseñada para ser utilizada como palanca o pala en de madera, o sobre otros materiales combustibles mientras todavía está caliente. MS 441 C-M 71
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 74
    que las rejillas están obstruidas, haga reparar el silenciador por un concesionario de servicio STIHL. Fuerzas reactivas, incluido el contragolpe Advertencia! Las fuerzas reactivas pueden ocurrir en cualquier momento ón de contragolpes, así como su intensidad. Estos incluyen la 72 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 75
    las combinaciones de espadas y cadenas que aparecen en la sección "Especificaciones" del manual de instrucciones u - otras combinaciones de espadas y cadenas de repuesto marcadas de a un centro de servicio de STIHL en su localidad. No use la sierra hasta haber corregido la avería. MS 441 C-M 73
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 76
    la cadena" del manual de instrucciones. STIHL ofrece una variedad de espadas y cadenas. Las espadas de contragolpe reducido y las cadenas de bajo contragolpe de STIHL están diseñadas para reducir el riesgo de lesiones causadas por contragolpe. Otras cadenas están diseñadas para obtener 74 MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 77
    de etiqueta verde, cadenas de bajo contragolpe con etiqueta verde y un freno rápido de cadena Quickstop STIHL, tanto para los usuarios con experiencia como para aquéllos que carezcan de ella en la utilizaci no han sido probadas con todas las combinaciones de motor y espada posibles. MS 441 C-M 75
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 78
    exclusivamente espadas con las longitudes indicadas en el capítulo de especificaciones del manual de instrucciones para el motor de su motosierra. Guías en forma una guía en forma de arco en ninguna de las motosierras de STIHL. Toda motosierra equipada con una guía en forma de arco es MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 79
    eléctricos, etc., tome medidas de precaución adicionales. Antes de comenzar los trabajos de corte, avise a la policía, empresas de servicios públicos o autoridades del ferrocarril. MS 441 C-M 77
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 80
    de unos 45° hasta una profundidad de aproximadamente 1/5 a 1/4 del diámetro del tronco. N Haga un segundo corte horizontal. N Quite el pedazo de 45° resultante. 78 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 81
    cuña, puede producirse un contragolpe. Las cuñas deben ser de madera o de plástico, pero jamás de acero porque se dañaría la cadena. MS 441 C-M 79
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 82
    en abanico hacia el eje de inclinación. Después, usando la púa de tope como pivote, cambie de posición la sierra para el próximo corte. 80 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 83
    peligro de contragolpe. No corte con la punta de la espada. Sea precavido y evite tocar el tronco o las ramas con la punta de la espada. MS 441 C-M 81
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 84
    vez. La madera astillada deberá cortarse con mucho cuidado. Las astillas afiladas pueden atraparse y salir lanzadas hacia 2 el operador. 1 001BA152 KN Troncos bajo tensión: 82 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 85
    ón que no esté descrito en su manual de instrucciones. Este tipo de trabajo debe ser realizado únicamente por el concesionario de servicio de STIHL. Por ejemplo, si se utilizan herramientas inadecuadas barra y el piñón; sustituya las ruedas o cadenas desgastadas. Mantenga afilada la MS 441 C-M 83
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 86
    íe el tanque de combustible (vea el capítulo "Almacenamiento de la máquina" en el manual de instrucciones). Accesorio de corte STIHL es el único fabricante en la industria que produce sus propios motosierras, espadas, cadenas de de corte dentro de poco tiempo de uso. 001BA191 KN 84 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 87
    de la espada. N Vuelva a colocar la tapa del piñón y apriete las tuercas con los dedos. N Pase al capítulo "Tensado de la cadena de aserrado" MS 441 C-M 85
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 88
    Este motor está certificado para funcionar con una mezcla de 50 a 1 de gasolina sin plomo y aceite STIHL para motores de dos tiempos. Su motor requiere una mezcla de gasolina de alta calidad y aceite de calidad ajustables, por lo cual no debe utilizarse en este tipo de motores. 86 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 89
    el envase y agítelo vigorosamente a mano para asegurar que se mezclen bien el aceite y la gasolina. Gasolina Aceite (STIHL 50:1 ó aceite de alta calidad equivalente) gal EE.UU. 1 2 1/2 5 oz fl EE.UU. 2,6 N Levante el mango hasta que esté vertical. 001BA218 KN 001BA229 KN MS 441 C-M 87
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 90
    de colocación están alineadas y/o la tapa no se ajusta de manera adecuada al girarla, la base de la 001BA220 KN Con el mango vertical: 88 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 91
    ) - esto girará la base de la tapa a la posición correcta. MS 441 C-M 001BA226 KN 001BA227 KN N Gire la tapa en sentido horario, cerrándola deje de utilizar la unidad de inmediato y llévela a su concesionario autorizado de STIHL para que la reparen. español / EE.UU Lubricante de cadena Para la
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 92
    de aceite; comuníquese con el concesionario de servicio, de ser necesario. STIHL recomienda que solamente los concesionarios STIHL autorizados efectúen los trabajos de mantenimiento y reparación. Revisión de lubricación - vea el capítulo "Revisión de la tensión de la cadena". 90 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 93
    la cadena El freno de la cadena está expuesto a desgaste normal. Es necesario hacerlo revisar en un lugar con personal competente, como el concesionario STIHL, cada vez que se cumplan los siguientes intervalos: Uso continuo: Uso a tiempo parcial: Uso esporádico: cada 3 meses cada 6 meses cada 12
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 94
    , el obturador debe estar en la posición de invierno. Si el motor funciona mal, investigue primero si es necesario usar la placa de cierre. 92 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 95
    la palanca de control maestro de la posición de funcionamiento F a Arranque }, pulse simultáneamente sin soltar el bloqueo del gatillo de aceleración y el gatillo de MS 441 C-M 93
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 96
    o después de un período prolongado sin uso o si se ha dejado que se agote el combustible (el motor se para), puede ser necesario 94 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 97
    el freno de la cadena aplicado (la cadena de aserrado está parada) se dañará rápidamente el embrague y el freno de la cadena. 001BA186 KN MS 441 C-M 95
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 98
    térmicas. Después de terminar el trabajo N Afloje la cadena si se ha vuelto a tensar la cadena cuando está a temperatura de funcionamiento durante el trabajo. 96 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 99
    a, llene el tanque de combustible a la mitad de su capacidad normal o vuelva a llenar el tanque de aceite cuando el tanque de combustible está media vacía MS 441 C-M 97
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 100
    mayoría de los cortes. N Filtro de aire HD (caja de filtro negra) con prefiltro de fieltro para condiciones de trabajo normales, secas o muy polvorientas. 98 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 101
    En caso de suciedad difícil o tela de filtro pegajosa N Lave el filtro con el limpiador universal de STIHL (accesorio especial) o una solución limpia y no inflamable (tal como agua jabonosa tibia) - enjuague el del filtro - evite el calor extremo N No lubrique el filtro con aceite MS 441 C-M 99
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 102
    caso de suciedad difícil o tela de filtro pegajosa N Lave el filtro con el limpiador universal de STIHL (accesorio especial) o una solución limpia y no inflamable (tal como agua jabonosa tibia) - enjuague el a intervalos más frecuentes que el filtro para servicio severo. 100 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 103
    ática a los cambios en las condiciones de funcionamiento. Ya no son necesarios los ajustes manuales del carburador - el carburador no tiene ningún tornillo de ajuste. Ajuste automático Ante carbón, instale uno nuevo N Vuelva a instalar el chispero N Inserte el tornillo y apriételo MS 441 C-M 101
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 104
    Advertencia! Para reducir el riesgo de incendio y de quemaduras, utilice solamente las bujías autorizadas por STIHL. Siempre empuje el casquillo (1) de la bujía firmemente en el borne (2) del tamaño adecuado. voltaico y encender los vapores del combustible, provocando un incendio. 102 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 105
    un destornillador para apalancar y quitar la cuerda del mango de arranque. N Quite el resto de la cuerda del rotor y del mango de arranque. 213BA019 KN MS 441 C-M N Pase la nueva cuerda por la parte superior del mango de arranque. 103
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 106
    un destornillador para quitar cuidadosamente las piezas del resorte de la caja. N Lubrique el resorte nuevo con unas cuantas gotas de aceite sin resina. 104 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 107
    del cilindro y al filtro de aire. N Si se usa lubricante biodegradable para cadenas y espadas, tal como STIHL BioPlus, llene completamente el tanque de aceite de la cadena. N Guarde la máquina en un lugar seco y de la cadena, use únicamente piñones para cadenas originales de STIHL. MS 441 C-M 105
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 108
    rectos / piñón flotante N Limpie la punta del cigüeñal y la jaula de agujas y lubrique con grasa STIHL (accesorio especial) N Deslice la jaula de agujas en la punta del cigüeñal N Después de la reinstalación, el riesgo de contragolpes y de las lesiones resultantes de los mismos. 106 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 109
    están marcados en el portalima. Para comprobar los ángulos Utilice un calibrador de rectificación STIHL (accesorio especial - vea la tabla "Herramientas de afilado"). Esta es una herramienta universal para necesario. N Trabe la cadena - empuje el protector de la mano hacia adelante. MS 441 C-M 107
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 110
    quita. 689BA023 KN 1 N Coloque un calibrador de rectificación (1) que iguale el paso en la cadena y empújelo contra el cortador - si el calibrador de 108 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 111
    252 3356 0814 252 3356 Kit de afilar 1) N° de pieza 5605 007 1027 5605 007 1027 5605 007 1028 5605 007 1029 5605 007 1030 MS 441 C-M 109
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 112
    ón de la cadena X X afilar X revise (desgaste, daño) X Espada limpie e invierta quite las rebabas X X Reemplazar X X Piñón de la cadena Revisar X Filtro de aire Limpiar Reemplazar X X X 110 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 113
    trabajo y/o diariamente al volver a cargar el tanque con combustible semanalmente mensualmente anualmente si falla si tiene daños según se requiera español / EE.UU X X X X X X X X X X X MS 441 C-M 111
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 114
    acudir a un concesionario STIHL para servicio 2) vea "freno de cadena" 3) Durante el uso inicial de las motosierras (con una potencia de 3,4 kW o más), apriete los tornillos de bloque del cilindro después de 10 a 20 horas de funcionamiento 4) sólo disponible en algunos países 112 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 115
    maestro 21 Gatillo de aceleración 22 Bloqueo de gatillo de aceleración 23 Mango trasero 24 Protector trasero de la mano # Número de serie 219BA047 KN MS 441 C-M 113
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 116
    ") Embrague Acopla el motor al piñón de la cadena cuando se acelera el motor sobre la velocidad de marcha en vacío. (no se muestra) 114 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 117
    ía A = 300 horas B = 125 horas C = 50 horas Motor Motor STIHL de un cilindro, dos tiempos Cilindrada: 70,7 cm3 (4,31 pulg³) Diámetro: manual adicional de caudal de aceite Capacidad del tan- que de aceite: 0,36 l (12,2 fl.oz) Peso seco, sin espada y cadena MS 441: 6,6 kg (14,6 lb) MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 118
    la publicación de este manual, consulte con su concesionario STIHL acerca de las recomendaciones más recientes de STIHL. Accesorios especiales Comuníquese con su concesionario STIHL para información acerca de correspondiente, en centímetros en una lengüeta y en pulgadas en la otra. 116 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 119
    originales de STIHL por el número de pieza STIHL, el logotipo de { y, en ciertos casos, el símbolo K de piezas STIHL. En las piezas pequeñas el símbolo puede aparecer solo. Vea "Especificaciones", en este manual, para los accesorios de corte de contragolpe reducido recomendados. MS 441 C-M 117
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 120
    el mantenimiento requerido descrito en su manual de instrucciones. STIHL Incorporated le recomienda guardar todos los STIHL llamando al 1-800-467-8445, o si lo prefiere puede escribir a STIHL Inc., 536 Viking Drive, P.O. Box 2015, Virginia Beach, VA 23450-2015 EE.UU. www.stihlusa.com 118 MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 121
    el intervalo hasta el primer punto de reemplazo programado para esa pieza. MS 441 C-M Diagnóstico Como propietario, a usted no se le debe cobrar autorizado por STIHL y presente la tarjeta de garantía firmada. Requerimientos de mantenimiento Las instrucciones presentadas en este manual se basan
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 122
    ™ Pro Mark™ Quad Power™ Quiet Line™ STIHL Compact™ STIHL HomeScaper Series™ STIHL Interchangeable Attachment Series™ STIHL M-Tronic™ STIHL Magnum™ STIHL MiniBoss™ STIHL MotoPlus 4™ STIHL Multi-Cut HomeScaper Series™ Stihl Outfitters™ STIHL PICCO™ STIHL PolyCut™ STIHL PowerSweep™ 120 MS 441 C-M
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 123
    STIHL RAPID™ STIHL SuperCut™ STIHL Territory™ TapAction™ TrimCut™ Esta lista de marcas comerciales está sujeta a cambios. Queda terminantemente prohibido todo uso de estas marcas comerciales sin el consentimiento expreso por escrito de ANDREAS STIHL AG & Co. KG, Waiblingen. español / EE.UU MS 441
  • Stihl MS 441 R C-M MAGNUM | Product Instruction Manual - Page 124
    chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 0458-557-8621-A englisch / spanisch USA U www.stihl.com ! ADVERTENCIA! El gas de escape del motor de esta máquina contiene productos químicos que en el estado de California son considerados como
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

{
STIHL MS 441 C-M
Instruction Manual
Manual de instrucciones
Warning!
This saw is capable of severe kickback which
may cause serious or fatal injury. Only for
users with extraordinary cutting needs and
experience and training dealing with kickback.
Chainsaws with significantly reduced kickback
potential are available. STIHL recommends
the use of STIHL reduced kickback bar and
low kickback chain.
Advertencia!
Esta sierra es capaz de causar contragolpes
severos, los cuales pueden causar lesiones
graves o mortales. Sólo es apta para usuarios
con necesidades extraordinarias de corte y
mucha experiencia y capacitación en el
manejo de los contragolpes. Existen sierras
con un potencial mucho menor de causar
contragolpes. STIHL recomienda usar una
barra y cadena de contragolpe reducido de
STIHL.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.