Sub-Zero WS-30 Sub-Zero Design Guide

Sub-Zero WS-30 Manual

Get Sub-Zero WS-30 PDF manuals and user guides View all Sub-Zero WS-30 manuals
Add to My Manuals
Save this manual to your list of manuals

Sub-Zero WS-30 manual content summary:

  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 1
    SUB-ZERO DESIGN GUIDE
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 2
    48 Refrigeration 44 Integrated Refrigeration 50 Wine Storage 64 Undercounter Refrigeration 84 Sub-Zero Warranties 92 IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Features and specifications are subject to change at any time without notice. Visit subzero.com/specs
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 3
    Built-In Refrigeration 3 subzero.com/specs Built-In Refrigeration. For the built-in line, Sub-Zero designers and in food preservation makes the built-in line nothing short of revolutionary. BUILT-IN MODELS 36" (914) 36" (914) 36" (914) 30" (762) 30" (762) 36" (914) 36" (914) 84" (2134) 84
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 4
    Built-In Refrigeration 4 Built-In Design Options. A design classic is now even better. Four distinct panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille option for the traditional Sub-Zero look. Overlay. Custom cabinet overlay panels
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 5
    Built-In Refrigeration 5 subzero.com/specs Flush Inset. This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf built-in ovens. Stainless Steel. For a professional look, this design requires
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 6
    ALL REFRIGERATOR / ALL FREEZER MODELS BI-36R BI-36RG BI-36F OVER-AND-UNDER MODELS BI-30U BI-30UG BI-36U BI-36UG SIDE-BY-SIDE MODELS BI- MODELS BI-36R, BI-36RG AND BI-36F Shipping weights and overall dimensions are based on stainless steel models. For flush inset applications, add 1/2" (13) to door
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 7
    Built-In Refrigeration Over-and-Under Models OVERALL DIMENSIONS 30" (762) 24" (610) 7 subzero.com/specs 36" (914) 24" (610) 84" (2134) 503/4" (1289) 84" (2134) 503/4" (1289) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 237/8" (606) 235/8" (
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 8
    Built-In Refrigeration Side-by-Side Models OVERALL DIMENSIONS 36" (914) 24" (610) 84" (2134) 733/4" (1873) 8 23/8" (60) MODEL BI-36S Overall dimensions are based on stainless steel models. For flush inset applications, add 1/2" (13) to door clearance dimensions. 23/8" (60) MODELS BI-42S, BI-
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 9
    Built-In Refrigeration Side-by-Side Models OVERALL DIMENSIONS 48" (1219) 24" (610) 84" (2134) 733/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 93/4" (248) 14" (356) 237/8" (606) 30" (762) 23/8" (60) MODELS BI-48S, BI-48SID AND BI-48SD 9 subzero.com/specs
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 10
    Built-In Refrigeration 10 Built-In Models STANDARD INSTALLATION 24" (610) OPENING DEPTH TOP VIEW If two units are installed side by side, refer to pages 30-31 for dual standard installations. 24" (610) OPENING DEPTH 83 3/4" (2127) OPENING HEIGHT A OPENING WIDTH SIDE VIEW Opening Width BI-36R
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 11
    Refrigeration 11 subzero.com/specs Planning Information ELECTRICAL REQUIREMENTS For all built-in models valves. A saddle valve kit is available through your authorized Sub-Zero dealer. The water line must built-in installation guide packed with the unit for detailed instructions. A copper line
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 12
    considerations. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your authorized Sub-Zero dealer. Custom cabinetry panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 13
    NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be aware that rough opening dimensions are different for this application. TRIM REVEAL 1/4" (6) min 1/4" (6) PANEL MAIN FRAME DOOR TRIM REVEAL 1/4" (6) min ROUT TO 1/4" (6) MAIN
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 14
    Out Location W 251/2" (648) A 53/16" (132) H 699/16" (1767) H 541/16" (1373) B 105/16" (262) Models BI-30U and BI-30UG REFRIGERATOR Door Panel FREEZER Drawer Panel BI-30UG Window Cut-Out Cut-Out Location W H 293/4" (756) 4915/16" (1268) W 293/4" (756) H 1811/16" (475) W 191/2" (495) H 3911
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 15
    / BI-48SID Model BI-36S REFRIGERATOR Door Panel FREEZER Door Panel W 1913/16" (503) W 157/16" (392) H 699/16" (1767) H 699/16" (1767) Models BI-42S, BI-42SID and BI-42SD REFRIGERATOR Door Panel W 2413/16" (630) FREEZER Door Panel W 167/16" (418) BI-42SD Dispenser Cut-Out Cut-Out Location
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 16
    height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. Optional Grille Panel 30" (762) Models 36" (914) Models 42" (1067) Models 48" (1219) Models W 293/4" (756) 353/4" (908) 413/4" (1060) 473/4" (1213) H 815/16" (227) 815/16" (227) 815/16" (227) 815/16" (227
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 17
    available as a sales accessory. This accessory kit includes partial framed molding and stainless steel panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only. The partial framed accessory kit is available through your authorized Sub-Zero dealer. Refer
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 18
    pages. IMPORTANT NOTE: Overlay models can be used in an overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation. The overlay design allows decorative panels to cover the door trim for a more seamless appearance
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 19
    pages. IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed. IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 20
    Models BI-30U and BI-30UG REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel BI-30UG Window Cut-Out Cut-Out Location W 30 built-in panel configurator at subzero.com/trade/panels. Grille panel dimensions
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 21
    21 subzero.com/specs Overlay Panels H H H H A B W W W W BI-36S / BI-42S / BI-42SID BI-42SD / BI-48SD BI-48S / BI-48SID Model BI-36S REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel W 201
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 22
    Built-In Refrigeration 22 This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. door swing and airflow. IMPORTANT NOTE: The flush inset application is not a separate model. This is an overlay unit in a flush installation. The same model
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 23
    Refrigeration 23 subzero.com/specs Built-In Models FLUSH INSET INSTALLATION 26 3/16" 24" (610) (665) DEPTH FLUSH TO CLEAT INSET DEPTH 1/4" (6) CLEAT 24" (610) DEPTH TO CLEAT 23/16" (56) 26 3/16" (665) FLUSH INSET DEPTH 23/16" (56) TOP VIEW 11/4" (32) UNIT WITH 3/4" (19) PANEL B SIDE VIEW
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 24
    opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open. IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 25
    on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com. Panel Offsets ALL REFRIGERATOR / ALL FREEZER Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom OVER-AND-UNDER Door / Drawer / Grille Sides Grille Top Grille Bottom / Door Top
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 26
    815/16" (227) H 395/8" (1006) B 51/4" (133) Models BI-36U and BI-36UG REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36UG Window Cut-Out Cut-Out Location W 37" (940) 351/8" (892) 353
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 27
    Built-In Refrigeration 27 subzero.com/specs Flush Inset Panels H H H H A B W W W W BI-36S / BI-42S / BI-42SID BI-42SD / BI-48SD BI-48S / BI-48SID Model BI-36S REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 28
    BI-42SD or BI-48SD, the refrigerator door panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in this area can range from 1/4" (6) to a maximum of 11/8" (29). IMPORTANT NOTE: Regardless of the thickness of the panel for model BI-42SD or BI-48SD
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 29
    prevent the panel from hitting the refrigerator lower hinge plate. When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are also available through your authorized Sub-Zero dealer. 24" (610) FRONT OF SIDE PANEL 1" (25
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 30
    Panels Dual Installation STANDARD APPLICATION Two overlay or stainless steel units may be placed side by side in a dual installation. Some standard applications will require a dual installation kit, available through your authorized Sub-Zero dealer. If you are installing two units side by side
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 31
    Built-In Refrigeration Dual Installation STANDARD INSTALLATION 24" (610) OPENING DEPTH TOP VIEW 31 subzero.com/specs 24" (610) OPENING DEPTH 83 3/4" (2127) OPENING HEIGHT A OPENING WIDTH SIDE VIEW Opening Widths Two 30" (762) Models 30" (762) and 36" (914) Models Two 36" (914) Models FRONT
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 32
    Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer. Dual installations
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 33
    Widths Two 30" (762) Models 30" (762) and 36" (914) Models Two 36" (914) Models A B 593/4" (1518) 621/4" (1581) 653/4" (1670) 681/4" (1734) 713/4" (1822) 741/4" (1886) IMPORTANT NOTE: A dual installation kit will be required for this installation. Dimensions assume a 3/4" (19) panel thickness.
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 34
    on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com. Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit. Panel Offsets ALL REFRIGERATOR / ALL FREEZER Doors (hinge) / Grille Sides Doors (handle
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 35
    H 395/8" (1006) B 51/4" (133) BI-36U and BI-36UG REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36UG Window Cut-Out Cut-Out Location W 361/2" (927) 351/8" (892) 353/4" (908) H 501
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 36
    This dual installation kit is not required if a custom filler strip is used. The filler strip should be a minimum of 2" (51) wide. Refer to the full-scale template on page 42 for more information. Dual Wide Grille-Overlay TWO 30" (762) MODELS Overlay Panel Spacer Panel Backer Panel 30" (762) AND 36
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 37
    Built-In Refrigeration 37 subzero.com/specs Accessories These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Grilles for an 83" (2108) or 88" (2235) finished height. • Framed
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 38
    Built-In Refrigeration 38 Framed Panel Thickness FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 1" 2" (25) (51) 1/4" (6) FRAMED PANEL 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL DOOR PANEL THICKNESS FRAMED APPLICATION
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 39
    Built-In Refrigeration Overlay Panel Thickness FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. 39 subzero.com/specs
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 40
    (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL DOOR OPENING 90° TOP VIEW 40 OVERALL WIDTH OF UNIT 0" 1" (25) SCALE
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 41
    Built-In Refrigeration Flush Inset Application FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 11/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 41 subzero.com/
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 42
    Built-In Refrigeration 42 APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE FILLER STRIP 11/4" (32) DOOR CLOSED Dual Installation-Standard FULL-SCALE TEMPLATE Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Depending on panel
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 43
    Refrigeration 43 subzero.com/specs PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE FILLER STRIP 11/2" (38) 1/2" (13) DOOR CLOSED Dual Installation-Flush Inset FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Depending on panel
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 44
    MODEL 648PROG
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 45
    Refrigeration 45 subzero.com/specs PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero door and may be either built in or freestanding. PRO 48 MODELS refrigeration system enhanced with triple evapora- tors allow independent control of storage conditions in refrigerator
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 46
    PRO 48 Refrigeration 46 PRO 48 Models OVERALL DIMENSIONS 48" (1219) 257/8" (657) 84" (2134) 421/8" (1070) HEIGHT DIMENSIONS ± 1/2" (13) 301/2" (775) 4" (102) 303/16" (767) 141/2" (368) MODELS 648PRO AND 648PROG 21" (533) 237/8" (606) 303/4" (781) 23/8" (60) SPECIFICATIONS Capacity /
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 47
    PRO 48 Refrigeration PRO 48 Models STANDARD AND FLUSH BUILT-IN INSTALLATIONS OPENING DEPTH TOP VIEW 47 subzero.com/specs OPENING DEPTH OPENING HEIGHT OPENING WIDTH SIDE VIEW Opening Dimensions Opening Width Opening Height Opening Depth FRONT VIEW Standard 471/2" (1206) 833/4" (2127) 24" (
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 48
    Refrigeration 48 Planning Information PRO 48 models receptacle. A separate circuit, servicing only this appliance, is valves. A saddle valve kit is available through your authorized Sub-Zero dealer. The water line PRO 48 installation guide packed with the unit for detailed instructions. A copper
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 49
    , subzero.com. • Stainless steel side panels and top for freestanding application. • Stainless steel side panel. • Stainless steel front and side kickplates. • Slide-out stainless steel refrigerator bin. • Refrigerator drawer dividers for compartmentalized storage. • Dozen egg container. • 90° door
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 50
    MODELS IC-27F, 427G (WINE) AND IC-27R
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 51
    Integrated Refrigeration 51 subzero.com/specs Integrated Refrigeration. With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 52
    /2" (876) HEIGHT DIMENSIONS ± 1/2" (13) 9 3/4" (248) 4" (102) 24" (610) 45/8" (117) 251/2" (648) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODELS IC-27R AND IC-27FI Overall dimensions do not include panels or handles. 24" (610) 191/2" (495) 45/8" (117) 251/2" (648) DIMENSIONS WILL VARY WITH
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 53
    Integrated Refrigeration Overall Dimensions 36" (914) TALL MODELS 36" (914) 14" (356) 15/16" (33) 24" (610) 7713/16" (1976) (13) 9 3/4" (248) 4" (102) 24" (610) 191/2" (495) 7" (178) 341/2" (876) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODELS 736TR, 736TFI AND 736TCI 53 subzero.com/specs
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 54
    Refrigeration 54 Overall Dimensions DRAWER MODELS 3/8" 27" (686) (10) 24" (610) 1/2" (13) 131/4" (337) 20 3/8" (518) 101/4" (260) 341/2" (876) 93/4" (248) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 24" (610) 191/2" (495) 257/8" (657) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODELS
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 55
    Integrated Refrigeration Opening Dimensions INTEGRATED MODELS 25" (635) OPENING DEPTH TOP VIEW 55 subzero.com/specs IMPORTANT NOTE: The depth of each integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 56
    Refrigeration 56 Electrical Requirements The electrical supply should be located within the shaded area shown in the illustrations. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing LEFT SIDE OF OPENING LEFT SIDE OF
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 57
    Integrated Refrigeration 57 subzero.com/specs Plumbing Requirements For integrated models with an automatic ice maker, and the unit. Do not use self-piercing valves. A saddle valve kit is available through your authorized Sub-Zero dealer. IMPORTANT NOTE: It is critical that the water line be
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 58
    4" (102) 27" (686) FINISHED OPENING 27" (686) TALL MODELS Typical Panel Dimensions COLUMN MODELS Door 27" (686) TALL MODELS Door Top Drawer Bottom Drawer 36" (914) TALL MODELS Door Top Drawer Bottom Drawer DRAWER MODELS Top Drawer Bottom Drawer W 263/4" (679) W 263/4" (679) 263/4" (679) 263
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 59
    Integrated Refrigeration 59 subzero.com/specs Cabinetry Applications DOOR PANEL HEIGHT The height of the door panel can extend beyond the typical panel height, provided you do not exceed the panel weight limit. The illustration below shows how the panel may be extended and what you need to
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 60
    illustration at the end of this section for specifics on door openings. Panel Requirements COLUMN MODELS Door Panel TALL AND DRAWER MODELS 27" (686) Door Panel 27" (686) Drawer Panel 36" (914) Door Panel 36" (914) Drawer Panel PANEL THICKNESS All Panels MAX WEIGHT 65 lbs (29 kg) MAX WEIGHT 40 lbs
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 61
    REVEAL PANEL FINISHED OPENING DOOR 1/8" (3) REVEAL PANEL FINISHED OPENING Framed-beaded inset. Frameless cabinetry. A dual installation kit is required for installations with 2" (51) or less space between the units. Dual installation kits are available through your authorized Sub-Zero dealer
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 62
    Integrated Refrigeration 62 Accessories These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Stainless steel front panels with tubular or pro handles. • Stainless steel
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 63
    Integrated Refrigeration Maximum Door Opening FULL-SCALE TEMPLATE If the panel is thicker than 3/4" (19), use the built-in 90° door stop to prevent damage to the panel and face frame at the maximum door opening. 63 subzero.com/specs INTEGRATED DOOR MAXIMUM 105° OPENING 105° OPENING TOP VIEW-1/4
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 64
    MODEL WS-30
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 65
    if desired-Sub-Zero helps make a wine collection an element of beauty in the home. WINE STORAGE MODELS 27" (686) 151/8" (384) 341/16" (865) 315W 237/8" (606) 34" (864) 424G 241/4" (616) 343/16" (868) 424FSG 80" (2032) 427G 27" (686) 30" (762) 80" (2032) 84" (2134) 427RG WS-30 KEY
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 66
    Wine Storage Overall Dimensions UNDERCOUNTER WINE STORAGE 151/8" (384) 24" (610) 341/16" (865) 4" (102) 165/8" (422) 13/4" (44) MODEL 315W 66 237/8" (606) 24" (610) 34" (864) 4" (102) 253/8" (645) MODEL 424G 13/4" (44) Overall dimensions are based on stainless steel panels and handles.
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 67
    Wine Storage 67 subzero.com/specs Overall Dimensions FULL-SIZE WINE STORAGE 27" (686) 14" (356) PANEL THICKNESS MODEL 427G Overall dimensions do not include panels or handles. 24" (610) 191/2" (495) 45/8" (117) 251/2" (648) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODEL 427RG WITH REFRIGERATOR
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 68
    68 Overall Dimensions FULL-SIZE WINE STORAGE 30" (762) 24" (610) 84" (2134) 733/4" (1873) Capacity and Weight Storage Capacity 315W 424G 427G 427RG WS-30 Bottles (750 ml) R cu ft (L) 26 46 132 78 5.3 (150) 147 Shipping Weight 315W 424G 424FSG 427G 427RG WS-30 lbs (kg) 118 (54) 195 (88
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 69
    Wine Storage Opening Dimensions UNDERCOUNTER WINE STORAGE 24" (610) OPENING DEPTH TOP VIEW 69 subzero.com/specs FULL-SIZE WINE STORAGE 25" (635) OPENING DEPTH TOP VIEW 24" (610) OPENING DEPTH 341/2" (876) OPENING HEIGHT A OPENING WIDTH SIDE VIEW MODELS 315W AND 424G Opening Width 315W 424G
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 70
    If an 88" (2235) grille height is specified, the opening height increases by 4" (102). If two units are installed side by side, refer to pages 30-31 for dual standard installations. 24" (610) OPENING DEPTH 83 3/4" (2127) OPENING HEIGHT 291/2" (746) OPENING WIDTH SIDE VIEW MODEL WS-30 FRONT VIEW
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 71
    Wine Storage 71 subzero.com/specs Planning Information ELECTRICAL REQUIREMENTS The electrical supply should be located within the shaded area shown in the illustration for your specific model. For model 315W, the electrical supply can be located anywhere on the back wall of the opening. Follow the
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 72
    Wine Storage 72 Door Panels Unless you are installing a stainless steel model, you will need to provide a frame for the glass door. If you order a stainless steel unit, models 315W, 424G, 424FSG and WS-30 will be shipped with their panels and hardware installed. For models 427G and 427RG, optional
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 73
    an optional lock kit on models 427G or 427RG, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. These instructions are available on our website, subzero.com
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 74
    , as they will be exposed. Framed Panel Requirements MODEL WS-30 Max Panel Weight Min Panel Thickness 75 lbs (34 kg) 1/4" (6) TRIM REVEAL 1/4" (6) min MAIN FRAME FRAMED PANEL SPECIFICATIONS A A A H A W WS-30 Framed DOOR Door Panel WINDOW Cut-Out Location W 293/4" (756) W 231/2" (597
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 75
    Wine Storage 75 subzero.com/specs Model WS-30 OVERLAY PANEL Overlay model WS-30 can be used in an overlay or flush inset application. The specific application will affect panel sizes, opening dimensions and the installation. Overlay model WS-30 will be shipped without handle hardware and with an
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 76
    Wine Storage 76 Model WS-30 FLUSH INSET PANEL Overlay model WS-30 used in a flush inset application allows the decorative panel to cover the door trim for a seamless appearance. The most common way to achieve this look is to work with three panels-the decorative flush inset panel, which is
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 77
    When two models WS-30 or a model WS-30 and built-in unit are installed side by side, a dual installation kit may be required. Contact your authorized Sub-Zero dealer for the proper components and installation instructions. For questions relative to the installation, call Sub-Zero at 800
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 78
    two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 79
    to the panels and the Sub-Zero unit. Panel Offsets MODEL WS-30 Doors (hinge) / Grille Sides Doors (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom Illus. A B C D E TOP VIEW DOOR / DRAWER / GRILLE BACKER SPACER CABINETRY DOOR TOP VIEW DUAL TRIM DOOR FLUSH INSET PANEL 5/16
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 80
    may change the width of your rough opening. When installing a model WS-30 with a custom side panel, an accessory kit is required. Stainless steel side panels are also available through your authorized Sub-Zero dealer. The side panel will need to be a minimum of 24" (610) deep and 1/2" (13) thick
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 81
    finished height for model WS-30. • Side panel in stainless steel or white enamel and stainless steel kickplate for model WS-30. • Full-length standard or extended framed handle for model WS-30. • Dual installation kit. • UL approved door lock. • 90° door stop for model WS-30. • Harness kit for Star
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 82
    424G and 424FSG 427G and 427RG WS-30 A 1015/16" (278) 191/2" (495) 2015/15" (532) 249/16" (624) Dimensions will vary for model 315W. Refer to specifications on our website, subzero.com. A (WIDTH) FRONT VIEW WINE SHELF WOOD FACING WINE STORAGE MODELS 5/8" Maximum Thickness (16) 7/64" (3) 11
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 83
    Wine Storage Door Clearance FULL-SCALE TEMPLATE Model 424G should extend a minimum of 1/4" (6) beyond the front surface of adjoining cabinetry to allow for the maximum 145° door the panel if the door is opened past 90°. MODEL 424 83 subzero.com/specs DOOR CLOSED 3/4" (19) DOOR PANEL DOOR OPENING
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 84
    MODELS 424G (WINE) AND UC-24BG
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 85
    Undercounter Refrigeration 85 subzero.com/specs Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a kitchen. They're ready to be fitted with a custom cabinet panel or can be ordered with a stainless steel panel. UNDERCOUNTER MODELS 23 7/8" (606) 23 7/8" (606) 34" (864)
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 86
    STORAGE CAPACITY UC-15I(P) and UC-15I(P)O SHIPPING WEIGHT UC-24R, UC-24BG, UC-24C(I) and UC-24RO UC-15I(P) and UC-15I(P)O F CU FT (L) 1.1 (31) LBS (KG) 26 (12) LBS (KG) 130 (59) 100 (45) 18" (457) 6" (152) MODELS UC-15I(P) and UC-15I(P)O Model UC-15I overall dimensions do not include panel
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 87
    Refrigeration 87 subzero.com/specs Opening Dimensions UNDERCOUNTER MODELS 24" (610) OPENING DEPTH TOP VIEW 24" (610) OPENING DEPTH 341/2" (876) OPENING HEIGHT A OPENING WIDTH SIDE . A separate circuit, servicing only this appliance, is required. IMPORTANT NOTE: Models UC-24RO and UC-15I
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 88
    Undercounter Refrigeration 88 Planning Information PLUMBING REQUIREMENTS For model UC-24C(I) and ice machine models, the water unit. Do not use self-piercing valves. A saddle valve kit is available through your authorized Sub-Zero dealer. IMPORTANT NOTE: A reverse osmosis system can be used
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 89
    Undercounter Refrigeration 89 subzero.com/specs Overlay Panel MODELS UC-24R, UC-24C(I) AND UC-15I(P) The overlay design allows for a decorative panel to cover the door trim for a seamless appearance that will complement surrounding cabinetry. You may also choose to match the handle hardware of
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 90
    authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Stainless steel front panel with tubular or pro handle. • Stainless steel tubular and pro handles to match the style of Wolf ovens and ranges. • UL approved door lock. STANDARD
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 91
    . 91 subzero.com/specs 191/2" (495) FRONT VIEW WINE SHELF WOOD FACING MODELS UC-24BG AND UC-24C(I) 5/8" Maximum Thickness (16) 7/64" (3) 11/2" (38) 27/32" (21) 5/64" (2) 23/64" (9) 9/16" (14) SIDE VIEW The information and images in this guide are the copyright property of Sub-Zero, Inc
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 92
    receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820. *Stainless steel doors, panels, handles, product frames and
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 93
    receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820. *Stainless steel doors, panels, handles, product frames and
  • Sub-Zero WS-30 | Sub-Zero Design Guide - Page 94
    SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZDG 9/2011
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
SUB-ZERO DESIGN GUIDE