Symphonic CD5001 Owner's Manual

Symphonic CD5001 Manual

Get Symphonic CD5001 PDF manuals and user guides View all Symphonic CD5001 manuals
Add to My Manuals
Save this manual to your list of manuals

Symphonic CD5001 manual content summary:

  • Symphonic CD5001 | Owner's Manual - Page 1
    OWNER'S MANUAL, MANUAL SEARCH 9 PROGRAMMING PLAY 10 REPEAT PLAY 11 REPEAT A DESIRED TRACK 11 REPEAT ALL THE DISCS 11 REPEAT PROGRAMMED TRACKS 11 RANDOM PLAY 11 DISPLAY 12 CARE AND MAINTENANCE 13 DISC HANDLING 13 CLEAN CABINET AND PANELS WHEN DIRTY 13 TROUBLESHOOTING GUIDE
  • Symphonic CD5001 | Owner's Manual - Page 2
    to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 18.Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified
  • Symphonic CD5001 | Owner's Manual - Page 3
    . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits
  • Symphonic CD5001 | Owner's Manual - Page 4
    FEATURES This Compact Disc Changer has a special automatic disc loading system that can hold up to five discs. This lets you select more music for continuous play and gives you more variety of music without having to remove and load discs. • Eight-Times Oversampling with Digital Filtering -
  • Symphonic CD5001 | Owner's Manual - Page 5
    PREPARATION 1 Turn off the CD player and the amplifier. 2 Connect one end of the supplied audio cable to the CD changer's L (Left) and R (Right) LINE OUT jacks, matching the red plug to the red R jack and the white plug to the white L jack. 3 Connect the other end of the cable to the receiver/
  • Symphonic CD5001 | Owner's Manual - Page 6
    OPERATING CONTROLS AND FUNCTIONS -FRONT VIEW- POWE 2 10 U OPEN / CLOSE krriu) 9 8 PLAY I PAUSE HI • S P 3 4 5 6 7 -REAR VIEW11 / rRO,Uc,TP.)U.,T)„),,i 1. Rotary Disc Tray 2. POWER button- To turn power on and off. 3. REMOTE SENSOR window- Receives infrared signals from the remote control
  • Symphonic CD5001 | Owner's Manual - Page 7
    REMOTE CONTROL OPERATION 1. DISPLAY button- Press to select the desired display mode: (ELAPSED) TIME or (MUSIC) TRACK NO. 2. DISC NUMBER buttons- Press to select disc for playback or programming from 1 to 5. 3. TRACK NUMBER buttons- PreSs to play or program select any track. 4. TRACK SKIP button-
  • Symphonic CD5001 | Owner's Manual - Page 8
    OPERATION LOA DING DISC You may load up to 5 compact discs into Your CD changer. 1. Press the POWER button on the CD player. NOTE: If the rotary tray No. I is not located in the first position, another number (2 - 5) will be displayed. 2. Press OPEN/CLOSE button on the CD player to open the disc
  • Symphonic CD5001 | Owner's Manual - Page 9
    disc. • When the last disc 5 (or the last available disc if there is no disc in compartment 5) ends, the player automatically enters stop mode. MANUAL SEARCH During play, this function allows you to quickly advance or reverse through the disc to find the desired part of the track. 1. Press and
  • Symphonic CD5001 | Owner's Manual - Page 10
    PROGRAMMING PLAY By selecting disc numbers from 1 to 5, and track numbers, you can choose up to 32 selections for playback in the order you like. 1. Press STOP ■ button to cancel any active functions. 2. Press PROG. button on the remote control to enter the program mode. The display shows "PR0C."
  • Symphonic CD5001 | Owner's Manual - Page 11
    REPEAT PLAY You can set this player to repeat: A desired track All the discs Programmed tracks Repeat a Desired Track 1. Press REPEAT button on the remote control to show "REP. ONE" on the display. One track on a selected Disk will be repeated. DISC TRACK REPEAT PROGRAMMED TRACKS 1. After storing
  • Symphonic CD5001 | Owner's Manual - Page 12
    DISPLAY When you turn on the CD changer, select a disc with the DISC SKIP button, or you press ■ (STOP) button to stop play, the number of disc you selected and its total number of tracks appears on the display. 3 1 un DISC TRACK 1 2 0 4 5 1 When you press DISPLAY button on the remote control,
  • Symphonic CD5001 | Owner's Manual - Page 13
    CARE AND MAINTENANCE DISC HANDLING • Use discs which have mark on them as shown. (Optical audio digital discs.) COMPACT • To clean-off, use a soft cloth. • Do not use a hard cloth since this will mar the disc. • Wipe the disc in a straight line from center to edge. • Never wipe with a circular
  • Symphonic CD5001 | Owner's Manual - Page 14
    TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your CD changer, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to remedy the problem. SYMPTOM POSSIBLE
  • Symphonic CD5001 | Owner's Manual - Page 15
    only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
OWNER'S
MANUAL
Sqmphonic
CD
CHANGER
CD
-5001
41
:).1111
STOP
IF
YOU
NEED
ADDITIONAL
ASSISTANCE
FOR
SET-
UP
OR
OPERATING
AFTER
READING
OWNER'S
MANUAL,
PLEASE
CALL
TOLL
FREE
1-800-242-7158
(EASTERN
TIME
9:00AM
-
4:30PM)
CONTENTS
"IMPORTANT
SAFEGUARDS"
FEATURES
PREPARATION
INSTALLING
THE
BATTERIES
OPERATING
CONTROLS
AND
FUNCTIONS
REMOTE
CONTROL
OPERATION
OPERATION
LOADING
DISC
LOADING
CDS
WITHOUT
STOPPING
PLAY-
BACK
8
NORMAL
PLAYBACK
9
CHOOSING
A
SPECIFIC
TRACK
9
MANUAL
SEARCH
9
PROGRAMMING
PLAY
10
REPEAT
PLAY
11
REPEAT
A
DESIRED
TRACK
11
REPEAT
ALL
THE
DISCS
11
REPEAT
PROGRAMMED
TRACKS
11
RANDOM
PLAY
11
DISPLAY
12
2
4
5
5
6
7
8
8
CARE
AND
MAINTENANCE
13
DISC
HANDLING
13
CLEAN
CABINET
AND
PANELS
WHEN
DIRTY
13
TROUBLESHOOTING
GUIDE
14
SPECIFICATIONS
14
AUDIO
14
SIGNAL
FORMAT
14
PICK-UP
14
GENERAL
14
ACCESSORIES
14
Please
read
before
using
this
equipment