TASCAM CD-RW901SL Specification

TASCAM CD-RW901SL Manual

Get TASCAM CD-RW901SL PDF manuals and user guides View all TASCAM CD-RW901SL manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM CD-RW901SL manual content summary:

  • TASCAM CD-RW901SL | Specification - Page 1
    TASCAM CD-RW901 CONTROL I/O connector RS-232C Protocol Specification Ver.1.00 August 2006 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 2
    TASCAM CD-RW901 RS-232C Protocol Specification 1. Overview The CD-RW901's REMOTE connector can be used to control the CD-RW901 from a computer or other external device. In this document, the CD-RW901 is referred to as the "controlled device," and the external device that controls it is referred to
  • TASCAM CD-RW901SL | Specification - Page 3
    TASCAM CD-RW901 RS-232C Protocol Specification RXD 2 TXD 3 RTS 7 CTS 8 GND 5 Controlled device (CD-RW901) RXD TXD RTS CTS GND External controller 2 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 4
    TASCAM CD-RW901 RS-232C Protocol Specification 3. Command format 3.1. Command format overview The command HEX 0Ah 30h 32h 39h 32h 33h 30h 30h 54h 65h 73h 74h 0Dh 3.2. Machine ID The CD-RW901 uses Machine ID=0 to receive commands and transmit returns. Commands and returns using Machine ID=0 also
  • TASCAM CD-RW901SL | Specification - Page 5
    TASCAM CD-RW901 RS-232C Protocol Specification If an unsupported command is received, the CD-RW901 will transmit ILLEGAL [F2]. 4 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 6
    TASCAM CD-RW901 RS-232C Protocol Specification 3.3. List of commands A list of commands is given below. Control/Preset/Sense Command 0F INFORMATION REQUEST 10 STOP 12 PLAY 13
  • TASCAM CD-RW901SL | Specification - Page 7
    78 ERROR SENSE 79 CAUTION SENSE TASCAM MD-CD1 RS-232C Protocol Specification F0 ERROR SENSE REQUEST F1 CAUTION SENSE REQUEST F2 ILLEGAL STATUS F4 POWER ON STATUS F6 CHANGE STATUS F8 ERROR SENSE RETURN F9 CAUTION SENSE RETURN 6 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 8
    TASCAM MD-CD1 RS-232C Protocol Specification 3.4. Command sequence In most cases the controlled device will not send an ACK in response to transport control or
  • TASCAM CD-RW901SL | Specification - Page 9
    TASCAM MD-CD1 RS-232C Protocol Specification MECHA STATUS SENSE RECORD (Record)
  • TASCAM CD-RW901SL | Specification - Page 10
    TASCAM MD-CD1 RS-232C Protocol Specification READY Puts the controlled device in PLAY-READY mode or RECORD-READY mode. data. ILLEGAL will not be transmitted. 0 1 Ready On ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return none 9 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 11
    TASCAM MD-CD1 RS-232C Protocol Specification SHUTTLE Puts the controlled device in to the Previous beginning of the previous index. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return none CALL Causes the controlled device to locate to the call point
  • TASCAM CD-RW901SL | Specification - Page 12
    TASCAM MD-CD1 RS-232C Protocol Specification AUTO CUE LEVEL PRESET Sets Sense Requests that the current preset level be returned. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return AUTO CUE LEVEL RETURN [A0] AUTO TRACK LEVEL PRESET Sets the Auto Track
  • TASCAM CD-RW901SL | Specification - Page 13
    TASCAM MD-CD1 RS-232C Protocol Specification DIRECT TRACK SEARCH PRESET % units. The adjustable range is ±16.0%. This can be set independently of the step that is specified by the CD-RW901's PITCH STEP? setting. A return command is returned only if Sense [FF] is specified.. If Sense [FF]
  • TASCAM CD-RW901SL | Specification - Page 14
    TASCAM MD-CD1 RS-232C Protocol Specification N1 N2 Minutes N1： Tens digit of minutes, N2： Ones digit of minutes F F Sense Requests that the currently preset
  • TASCAM CD-RW901SL | Specification - Page 15
    TASCAM MD-CD1 RS-232C Protocol Specification SYNC REC LEVEL PRESET Sets the Data Title Single-byte alphanumeric characters 84 ・ If a track number not existing on the disc is specified, the CD-RW901 will transmit ILLEGAL [F2]. ・ The title is between 0 bytes and 80 bytes. The characters up to
  • TASCAM CD-RW901SL | Specification - Page 16
    TASCAM MD-CD1 RS-232C Protocol Specification TIME SEARCH PRESET Searches track number not existing on the disc is specified, the CD-RW901 will transmit ILLEGAL [F2]. ・ If data outside the operating range is received, the CD-RW901 will transmit ILLEGAL [F2]. Return none KEY CONTROL DATA PRESET
  • TASCAM CD-RW901SL | Specification - Page 17
    TASCAM MD-CD1 RS-232C Protocol Specification FADE IN/OUT TIME PRESET Specifies the fade-in/out time used for the fade-in/out recording function
  • TASCAM CD-RW901SL | Specification - Page 18
    TASCAM MD-CD1 RS-232C Protocol Specification ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return AUTO CUE SELECT RETURN [B0] 17 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 19
    TASCAM MD-CD1 RS-232C Protocol Specification AUTO TRACK SELECT Specifies the Sense Requests that the preset content be returned. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return AUTO TRACK RETURN [B1] EOM TRACK TIME PRESET Specifies the time (in
  • TASCAM CD-RW901SL | Specification - Page 20
    TASCAM MD-CD1 RS-232C Protocol Specification 19 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 21
    TASCAM MD-CD1 RS-232C Protocol Specification PITCH CONTROL SELECT Specifies the Requests that the preset content be returned. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return PITCH CONTROL SELECT RETURN [B5] AUTO READY SELECT Specifies the Auto
  • TASCAM CD-RW901SL | Specification - Page 22
    TASCAM MD-CD1 RS-232C Protocol Specification SYNC REC SELECT Specifies Sense Requests that the preset content be returned. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return SYNC REC SELECT RETURN [B8] INCR PLAY SELECT Specifies the Incremental Play
  • TASCAM CD-RW901SL | Specification - Page 23
    TASCAM MD-CD1 RS-232C Protocol Specification REMOTE/LOCAL SELECT Enables or Sense Requests that the preset content be returned. ・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2]. Return REMOTE/LOCAL SELECT RETURN [CC] PLAY MODE SENSE Requests that the status
  • TASCAM CD-RW901SL | Specification - Page 24
    TASCAM MD-CD1 RS-232C Protocol Specification CURRENT TRACK INFORMATION SENSE Single byte alphanumeric characters 84 ・ If a track number not existing on the disc is specified, the CD-RW901 will transmit ILLEGAL [F2]. Return TEXT RETURN [D9] TOTAL TRACK No./TOTAL TIME SENSE Requests that
  • TASCAM CD-RW901SL | Specification - Page 25
    TASCAM MD-CD1 RS-232C Protocol Specification Command Machine ID Data Return 5E 0 none PGM TOTAL TRACK No./TOTAL TIME RETURN [DE] 24 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 26
    TASCAM MD-CD1 RS-232C Protocol Specification KEYBOARD TYPE SENSE Requests the type of PS/2 keyboard connected to the controlled device. Command 5F Machine ID 0 Data
  • TASCAM CD-RW901SL | Specification - Page 27
    TASCAM MD-CD1 RS-232C Protocol Specification INFORMATION RETURN This is the return command in response to the command "INFORMATION REQUEST [0F]." It returns the software
  • TASCAM CD-RW901SL | Specification - Page 28
    TASCAM MD-CD1 RS-232C Protocol Specification PITCH CONTROL DATA RETURN This is the return command in response to the command "PITCH CONTROL DATA PRESET [25]."
  • TASCAM CD-RW901SL | Specification - Page 29
    TASCAM MD-CD1 RS-232C Protocol Specification KEY CONTROL DATA RETURN This is the return command in response to the command "KEY CONTROL DATA PRESET [2D]."
  • TASCAM CD-RW901SL | Specification - Page 30
    TASCAM MD-CD1 RS-232C Protocol Specification AUTO TRACK SELECT RETURN This is the return command in response to the command "AUTO TRACK SELECT [31]." It
  • TASCAM CD-RW901SL | Specification - Page 31
    TASCAM MD-CD1 RS-232C Protocol Specification Request/Preset PITCH CONTROL SELECT [35] 30 TEAC Corporation
  • TASCAM CD-RW901SL | Specification - Page 32
    TASCAM MD-CD1 RS-232C Protocol Specification AUTO READY SELECT RETURN This is the return command for the command "AUTO READY SELECT [36]." It returns the
  • TASCAM CD-RW901SL | Specification - Page 33
    TASCAM MD-CD1 RS-232C Protocol Specification KEY CONTROL SELECT RETURN This is the return command for the command "KEY CONTROL SELECT [3D]." It returns the
  • TASCAM CD-RW901SL | Specification - Page 34
    TASCAM MD-CD1 RS-232C Protocol Specification MECHA STATUS RETURN This is the return command for the command "MECHA STATUS SENSE [50]." It returns the current
  • TASCAM CD-RW901SL | Specification - Page 35
    TASCAM MD-CD1 RS-232C Protocol Specification DISC STATUS RETURN This is the Status 00：Disc not present 01：Disc present Data 3 00：CD-DA 01：CD-R (Audio) Data 4 Disc Type 02：CD-RW (Audio) 10：CD-Data (MP3 CD) 11：CD-R (Data) 12：CD-RW (Data) Request/Preset DISC STATUS SENSE [56] CURRENT TRACK
  • TASCAM CD-RW901SL | Specification - Page 36
    TASCAM MD-CD1 RS-232C Protocol Specification CURRENT TRACK TIME RETURN This is the return command for the command "CURRENT TRACK TIME SENSE [58]." It returns
  • TASCAM CD-RW901SL | Specification - Page 37
    TASCAM MD-CD1 RS-232C Protocol Specification TOTAL TRACK No./TOTAL TIME RETURN This is the return command for the command "TOTAL TRACK No./TOTAL TIME
  • TASCAM CD-RW901SL | Specification - Page 38
    TASCAM MD-CD1 RS-232C Protocol Specification Data 5 Data 6 Data 7 Data 8 Data 9 Data 10 Data 11 Data 12 Request/Preset Tens digit of the minutes Ones
  • TASCAM CD-RW901SL | Specification - Page 39
    TASCAM MD-CD1 RS-232C Protocol Specification POWER ON STATUS This command indicates that the controlled device has been powered-on. Command F4 Machine ID 0 Data
  • TASCAM CD-RW901SL | Specification - Page 40
    TASCAM MD-CD1 RS-232C Protocol Specification ERROR SENSE RETURN This is the return command for the command "ERROR SENSE [78]." It returns an error code.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
TASCAM CD-RW901
CONTROL I/O connector
RS-232C Protocol Specification
Ver.1.00
August 2006
TEAC Corporation