TASCAM DP-03SD Owners Manual

TASCAM DP-03SD Manual

Get TASCAM DP-03SD PDF manuals and user guides View all TASCAM DP-03SD manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM DP-03SD manual content summary:

  • TASCAM DP-03SD | Owners Manual - Page 1
    D01209720C DP-03SD Digital Portastudio OWNER'S MANUAL
  • TASCAM DP-03SD | Owners Manual - Page 2
    the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE in this manual is in compliance with the corresponding technical standards. IN USA/CANADA, USE ONLY ON 120 V SUPPLY. 2 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 3
    instructions. attachments/accessories specified problems with this product, contact TEAC for a service power supply cord that has a grounding plug. The cord of such a product must be plugged into an AC outlet that has a protective grounding connection. ªª For China 2000m 机种 : DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 4
    7 Cleaning the unit 7 About SD cards 7 Precautions for use 7 Using the TEAC Global Site 7 User registration 7 About TASCAM customer support service 7 2 - Quick Start Guides 8 Playback and mixing 8 Preparations 8 Listening to the demo song 9 Recording and mastering 10 Creating a new song
  • TASCAM DP-03SD | Owners Manual - Page 5
    list 66 14 - Troubleshooting 67 15 - Messages 68 General messages 68 16 - Specifications 70 Ratings 70 Audio input/output ratings 70 Control input/output ratings 70 Audio performance 70 Computer requirements 70 General 71 Backup memory 71 17 - Commonly-used Functions 73 5 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 6
    during transportation. • Main unit 1 • AC adaptor (TASCAM PS-1225L 1 • Power cord for AC adaptor 1 • SD card (in the unit 1 • Owner's manual (this document 1 The warranty is included at the end of this manual. About this manual In this manual, we use the following conventions: • The names of
  • TASCAM DP-03SD | Owners Manual - Page 7
    TASCAM customer support service. Precautions for use SD cards are delicate media. In order to avoid damaging a card or the card an SD card when the power is ON Using the TEAC Global Site You can download the Owner's Manual necessary card and proof of purchase might also be necessary. 7 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 8
    the rear panel. Headphones 2 After inserting the SD card, close the card slot cover. 3 Connect the included AC adaptor (TASCAM PS-1225L) to the DC IN 12V connector on the rear panel. 5 Press the STANDBY/ON button on the rear panel to turn the power ON. TASCAM PS-1225L DC plug AC outlet CAUTION
  • TASCAM DP-03SD | Owners Manual - Page 9
    Guides CAUTION • Do not remove or insert an SD card when the power is ON. Always turn the power OFF (standby) before removing or inserting a card. • If you remove or insert an SD card when the power the TRACK 1-8 faders, MASTER fader and PHONES LEVEL knob to listen to the demo song. 9 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 10
    already followed the instructions in the previous section, and that you have connected monitoring equipment, started the unit and installed the SD card. TIP This F4 (¥) button to open the SONG screen. 10 TASCAM DP-03SD 3 Use the DATA wheel to select the CREATE item, and press the F4
  • TASCAM DP-03SD | Owners Manual - Page 11
    2 - Quick Start Guides The song that has been created is given the name (title) " SONG***" (*** is a number). 4 Change the name (title) of the song as the builtin microphone on the right side of the front panel (MIC B) as the input source for INPUT B. TRACK 1 REC indicator 11 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 12
    2 - Quick Start Guides 3 Use the INPUT A TRIM knob (INPUT A) and " " (TRACK 1) on the display. When you raise the TRACK 1 fader, the MASTER fader and the PHONES LEVEL knob, you can hear the sound of the guitar through the headphones, and the is unlit, the input cannot be heard. 12 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 13
    , the recording source for tracks 1, 3, 5 and 7 is set to INPUT A (A), and the recording source for tracks 2, 4, 6 and 8 is set to INPUT B (B). TRACK 2 REC indicator 13 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 14
    2 - Quick Start Guides 5 Return to the beginning for TRACK 3 to B. 6 As necessary, use the TRACK 1 and 2 faders, PAN knobs, MASTER fader and PHONES LEVEL knob to adjust the monitoring level and balance. 3 Press the HOME button to return record standby. TRACK 3 REC indicator 14 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 15
    . 2 Use the TRACK 1-3 PAN knobs to adjust the stereo positions of each track. Watch the and meters on the display as you make adjustments. 15 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 16
    mode is enabled and the Home Screen reopens. MIXDOWN appears in the upper left. 16 TASCAM DP-03SD NOTE • Mastering mode cannot be started if you have not created a stereo master track. • From multitrack mode, press the MIXDOWN/MASTERING button once to enter mixdown mode and once again to enter
  • TASCAM DP-03SD | Owners Manual - Page 17
    to return to the MASTERING COMP screen. TIP Press the F4 (PARM) button to open the screen where you can also adjust the parameters of the compressor. 4 Press the F2 (ON) button to turn the compressor ON. The word OFF at the top left of the screen changes to ON. 17 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 18
    to turn the power off properly. CAUTION If you cut the power to the unit by disconnecting the power cord, for example, all recorded data and settings made since the last time the unit was shut down or a song was saved will be lost. These lost data and settings cannot be recovered. 18 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 19
    that requires phantom power. • Do not supply phantom power to an unbalanced dynamic microphone. • Supplying phantom power to some types of ribbon microphones could break them. Do not supply phantom power to a ribbon level signal. Set it to INTERNAL MIC B when using builtin MIC B. 19 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 20
    , including the EQ SETTING, INPUT EQ and MASTERING EQ screens. e Display This shows various types from the left as F1, F2, F3 and F4 in this manual. t REVERB knobs (TRACK 1-TRACK 8) Use to adjust the recording (REC button ON), the REC 20 TASCAM DP-03SD indicator blinks when the unit is stopped and
  • TASCAM DP-03SD | Owners Manual - Page 21
    3 - Names and Functions of Parts h MASTER fader Use to adjust the stereo signal level output from the LINE OUT jacks and PHONES jack. Use also to adjust the recording locate to the TO point. Press and hold this button to set the playback position at that moment as the TO point. 21 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 22
    input jack. You can also connect a condenser microphone that requires phantom power. (1: GND, 2: HOT, 3: COLD) NOTE Do not input signals TASCAM RC-3F foot switch (sold separately) to allow a variety of remote control operations, including punch in/out (start and stop recording). 22 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 23
    No USB cable is supplied with this unit. Please use one at hand or purchase one is necessary.) R SD card slot Insert the SD card into this slot. T Cord holder Wrap the cord of the included TASCAM PS-1225L AC adaptor ground the unit. (Please prepare the necessary wiring yourself.) 23 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 24
    MASTERING 2 Location mark number indicator The number (001-999) of the current location mark is shown after the flag icon. 3 SD card protection indicator If the SD card is protected, the lock icon appears. 4 SD card insertion status If an SD card 54 page 40 page 36 page 44 24 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 25
    BACK appears above the F1 button, so the assignment of the F1 button is "BACK" when using this screen. In this manual, we show this as the "F1 (BACK) button". Likewise, the assignments of the F2, F3 and F4 buttons are CURSOR. • Press the HOME button to return to the Home Screen. 25 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 26
    be used. • A list of SD cards that have been confirmed for use with this unit can be found on our web site. Please access to a product page of this product from the TEAC Global Site (http://teacglobal.com) to find the list or contact the TASCAM customer support service. The bottom panel has a hook
  • TASCAM DP-03SD | Owners Manual - Page 27
    be recovered. • When the power is turned OFF (STANDBY), the operation history of the currently loaded song will be erased (cleared). When you turn the power back ON, the song will be restored to the previous state, but you will not be able to undo or redo operations on the song. 27 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 28
    This could cause a loud noise and damage equipment. • Turn the unit output volume down using the PHONES knob and MASTER fader on the front panel before turning phantom power ON or OFF. Depending on the mic, a loud noise could occur, damaging equipment and harming people's hearing. 28 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 29
    the actual position in which it will be used. 4 After making the setting, press the HOME button to return to the Home Screen. 4 - Preparations 29 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 30
    multitrack (tracks 1-8) and the stereo master track are saved. This chapter starts with an explanation of SD card partitions, and then covers basic a list of songs in the current partition. A star (*) icon appears 30 TASCAM DP-03SD A default song name like "SONG****" is given to the new song. (****
  • TASCAM DP-03SD | Owners Manual - Page 31
    to the Home Screen. Erasing songs You can erase a single song or multiple songs at once. You might want to erase unneeded songs if the SD card starts to run out of open space. 1 When the recorder is stopped, press the MENU button to open the MENU screen. 31 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 32
    Protected" message appears and the operation is prevented. • To remove protection from a song, follow the above procedures but set PROTECT to OFF in step 4. 32 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 33
    the master fader down before turning phantom power ON power ON. The indicator above the PHANTOM button lights, and the Home Screen reopens. To turn phantom power OFF, press the F1 (OFF) button instead. The following screen appears whenever phantom power is being turned ON or OFF. 33 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 34
    meter (L, R) These show the stereo bus output level of this unit. Adjust the output level with the MASTER fader. Assigning inputs When using this unit, "assigning inputs" means setting the recording source for each track INPUT EQ screen. This shows the setting screen for IN A. 34 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 35
    page 39. 5 Press the PLAY (Á) button to play back the recorded track. Use the track faders and MASTER fader to adjust the playback level. Adjust the PHONES LEVEL knob or the volume control on your monitoring system to in this chapter to assign input sources to tracks for recording. 35 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 36
    state. 2 Use the DATA wheel to select the event that you want to return to (all events after the selected event will be undone). 36 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 37
    ), turn song protect ON before turning the power OFF (STANDBY) (see "Protecting songs" on page 32). CAUTION You cannot undo erasing the operation history! Only erase it when you are certain that you want to do so. 2 Press the F4 (CLEAR) button. A confirmation message appears. 37 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 38
    playback, and press at any other time to stop Locate to the last point where playback started Default values: CUE (L), PUNCH (C), PLY/STP (R) Foot switch TASCAM RC-3F (optional) 38 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 39
    . For a mono bounce, turn the PAN knobs of the bounce source tracks all the way to L. Use the MASTER fader to adjust the overall level. 4 After returning to the start of the song, press the PLAY (Á) button the REC buttons for the bounce destination tracks (the indicators blink). 39 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 40
    wheel to choose a mark (they're listed in the order they appear in the song) and press F4 (JUMP) to jump to that mark. 40 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 41
    During repeat playback • When in automatic punch in and out mode • When the recorder is in MIXDOWN or MASTERING mode • When the LOCATE LIST or I/O SETTING screen is open Setting IN, OUT and TO points Regardless marks. 2 Press the F3 (POINT) button to open the I/O SETTING screen. 41 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 42
    1.0 to 9.9 sec. in 0.1-sec. units. The default setting is 1.0sec. 4 When finished making settings, press the HOME button to return to the Home Screen. 42 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 43
    RECORD (-) indicator stops blinking and turns off. Playback automatically stops one second after the OUT point. You can repeat rehearsal until you are satisfied. 43 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 44
    . See "Using IN, OUT and TO points" on page 41 for instructions about how to do this. IN point The IN point is the starting 5/6, 7/8: track pairs • 1-8: all tracks • MST: stereo master track • ALL: all tracks or the stereo master track SOURCE TRK screen CLEAN OUT TRK screen 44 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 45
    source track, and inserts it on the COPY destination track starting from the TO point. This operation does not change the COPY source track. 45 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 46
    to after the OUT point. Therefore, the track becomes longer. The following parameters are used in this operation. • OPEN TRK (1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8, ALL) • IN/OUT 46 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 47
    (part erase) */ 065 */ 065 Use this function to duplicate a single track, a track pair or the stereo master track on a different track or track pair. Each track is copied entirely, so the IN/OUT/TO points have no in this operation. • CLEAN OUT TRK (1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8) 47 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 48
    track. Levels and balance Use the TRACK 1-8 faders to adjust the relative balance of the tracks. Then use the MASTER fader to adjust the overall level. Watching the L and R meters on the display, adjust the level until it the same time. The reverb is applied after the track EQ. 48 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 49
    also appear in inverse (dark number on light background) on the Home Screen as shown below. Tracks 2, 3, 4 and 7 are muted Creating a stereo master track When you are satisfied with your mix, this unit can record the mixed down tracks and create a stereo master track internally. 49 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 50
    . Press and hold the IN [SET IN] button where you want to set the start (IN) point of the stereo master track, and press and hold the OUT [SET OUT] button where you want to set the end (OUT) point. For MIXDOWN mode. • In MIXDOWN mode, you cannot change the IN, OUT or TO points. 50 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 51
    is not possible. • Repeat and location mark functions cannot be used. Since the stereo master track playback signal is output from the PHONES jack and LINE OUT jacks, you can record regardless of the current position. Recording in MASTERING mode overwrites the stereo master track. 51 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 52
    3 After making the setting, press the F1 (BACK) button to return to the Home Screen. The EQ item on the MASTERING screen shows whether the mastering equalizer is currently ON or OFF. 52 TASCAM DP-03SD 3 Use the DATA wheel to select an item in the library, and press the F4 (EXEC) button to confirm
  • TASCAM DP-03SD | Owners Manual - Page 53
    stereo master track You can use the clone track function to copy the stereo master track to other tracks. (See "CLONE track (track duplication)" on page 47.) Exiting MASTERING mode Press the MIXDOWN/MASTERING button to exit MASTERING mode and return to ordinary MULTITRACK mode. 53 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 54
    A switch to GUITAR (see "Selecting the input sources" on page 33). To use the built-in mic, set the INPUT A switch to INTERNAL MIC A. 54 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 55
    F1 (CHROM) button to change to chromatic tuner mode. 3 When you have finished tuning, press the HOME button to return to the Home Screen. 55 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 56
    Use the F3 [5] and F4 [b] buttons to select (highlight) the Auto Power Save item setting value, and use the DATA wheel to set it to one value) Viewing information You can view information about the current song, the SD card and the firmware. 1 Press the MENU button to open the MENU TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 57
    A list of SD cards that have been confirmed for use with this unit can be found on our web site. Please access to a product page of this product from the TEAC Global Site (http://teacglobal.com) to find the list or contact the TASCAM customer support service. Formatting cards This operation formats
  • TASCAM DP-03SD | Owners Manual - Page 58
    11 - SD Card Management Reformatting MTR partitions You can reformat an MTR the partition. • When reformatting finishes the CARD menu reopens. • After reformatting, one song is automatically created in the MTR partition. • To cancel reformatting, press the F4 (NO) button. 58 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 59
    the F3 (YES) button to initialize the entire card and format it as FAT32. To cancel initialization, press the F4 (NO) button. CAUTION After initializing an SD card, it is necessary to format it if you want to use it with the DP-03SD again. (See "Formatting SD cards" on page 27). 59 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 60
    Supported operating systems" below). CAUTION If you want to remove an SD card from this unit and back-up its data on a computer using a card reader, always turn off the unit's power before removing the card Stereo master track A stereo master track 2.0 standards. 60 TASCAM DP-03SD Connecting with a
  • TASCAM DP-03SD | Owners Manual - Page 61
    to disconnect computers that use Windows XP, Windows Vista, Windows 7 or Windows 8 operating systems. A PC card icon and arrow appear in the taskbar (usually at the bottom right of the screen). 1 Left-click on the song (maximum of 8 characters) (see "Editing names" on page 30). 61 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 62
    (YES) button. After the currently loaded song is saved, the song selected in step 6 is restored and loaded. NOTE If the open space on the card is insufficient, an error message appears. 9 Press the HOME button to return to the Home Screen. 62 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 63
    name is short, spaces appear after the file name on the FAT partition, but those spaces are not included in the actual file name. 63 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 64
    , you can export more than one track at once. Select a track and press the F4 (✔) button again to remove the check from its checkbox. 64 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 65
    "Disconnecting" on page 60). NOTE If there is no stereo master track, an error message appears. 4 Use the REW (Ô)/F FWD () buttons, the DATA wheel and the F3 (INS) and F4 (DEL) buttons to edit the name of the stereo master file being exported (See "Editing names" on page 30). 65 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 66
    M. POP POP Rock1 POP Rock2 Rock1 Rock2 Classic Dance R&B Hip Hop Good for basic CD mastering Makes the sound quality more showy, bringing out low frequencies and especially emphasizing high frequencies While +3dB +3dB +3dB +5dB +8dB +2dB +2dB +2dB +1dB Auto Makeup On On On On 66 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 67
    14 - Troubleshooting If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the problem, please contact the store where you purchased this unit or TASCAM customer support service. Also, see the "15 - Messages" on page
  • TASCAM DP-03SD | Owners Manual - Page 68
    )" on page 47.) Use an SD card larger than 512 MB. The song is protected ("Protecting songs" on page 32) and you are trying to change it (record or edit, etc.). Unprotect the song. You have 250 songs on one partition. You must delete some before you can create another song. 68 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 69
    Error Mount Error SaveParam Fail SD-Card Error! SD Not Found SD Read Busy SD Write Busy 15 - Messages power OFF and restart it. If the error message continues to appear frequently, please contact the store where you purchased this unit or a TASCAM customer support service. 69 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 70
    SD card (512 MB - 2 GB) or SDHC card (4 GB - 32 GB) File system MTR partition: TASCAM level: -10 dBV 70 TASCAM DP-03SD Maximum output level: +6 dBV Power PC, iMac, G3, G4 266 MHz or faster 64 MB or more memory USB port (USB 2.0 recommended) Recommended USB host controller Intel chipset Supported
  • TASCAM DP-03SD | Owners Manual - Page 71
    unit power is turned off. PREFERENCE item • Repeat Int • Contrast • Foot switch L/C/R NN NN • Illustrations in this manual might differ from the actual product. • In order to improve the product, specifications and appearance could be changed without prior notice. NN 71 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 72
    16 - Specifications Block diagram 72 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 73
    section is a brief guide to some operations on the DP-03SD which may not be immediately obvious from looking at the panel controls. Button sequences are written like this: STOP + Ô means "press and hold the STOP button and press Ô." Menu items are written like this: MENU ® CARD ® FORMAT, meaning
  • TASCAM DP-03SD | Owners Manual - Page 74
    on the stereo master track MIXDOWN/MASTERINGx2 ® F1 See "Mastering the stereo master track" on page 51. Use phantom power PHANTOM See "Using phantom power" on page on the stereo master track MIXDOWN/MASTERINGx2 ® F2 See "Mastering the stereo master track" on page 51. 74 TASCAM DP-03SD
  • TASCAM DP-03SD | Owners Manual - Page 75
    instructions contained in your owner's manual. 4. Damage occurring during shipment of the product. (Claims must be presented to the carrier) 5. Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service a defect or a problem, please contact the dealer
  • TASCAM DP-03SD | Owners Manual - Page 76
    Blvd., Futian District, Shenzhen 518040, China 1118.MA-2763A https://tascam.jp/jp/ https://tascam.com/us/ https://tascam.eu/ https://tascam.de/ http://tascam.cn/ Printed in China ✂ WARRANTY Model/Modèle/Modell Modello/Modelo/型号 DP-03SD Serial No./No de Série/Seriennummer Numero di serie/Número de
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
D01209720C
DP-03SD
Digital Portastudio
OWNER'S MANUAL