TASCAM M-164UF Owners Manual

TASCAM M-164UF Manual

Get TASCAM M-164UF PDF manuals and user guides View all TASCAM M-164UF manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM M-164UF manual content summary:

  • TASCAM M-164UF | Owners Manual - Page 1
    D01083020A M-164 M-164FX M-164UF Analog Mixer OWNER'S MANUAL
  • TASCAM M-164UF | Owners Manual - Page 2
    important operating and maintenance (servicing) instructions in the literature accompanying the in accordance with the instruction manual, may cause harmful interference ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ ƻ 6-7 h 6-7 3%'( 2 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 3
    Install in accordance with the manufacturer's instructions. 8 Do not install near attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 4
    Driver settings 30 Connecting by USB 30 Using Cubase LE4 to record 30 6 − Troubleshooting 31 Related to mixer settings 31 Related to recording with Cubase LE4 (M-164UF the model number and serial number and retain them for your records. Model number Serial number 4 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 5
    electrical shock. About this manual In this manual, we use the following conventions: •• The names of keys and controls are given in the following typeface: MENU. •• Additional information is introduced in the styles below when needed: Useful hints when using the unit. 5 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 6
    situation and supplement. CAUTION Instructions that should be followed to avoid injury, damage to the unit or other equipment, and loss of data. Trademarks •• TASCAM is a registered trademark of paint thinner, or other chemical agents as they could damage the surface. 6 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 7
    at the MONITOR section. 4 indicator Lights when the mixer power has been turned ON using the ON/STANDBY switch 12 kHz and a boost/cut range of ±15 dB. The EQ LOW knob adjusts the low frequency range with a roll-off frequency of 100 Hz and a boost/cut range of ±15 dB. 7 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 8
    in) to send a channel signal to the SUB bus. u Channel faders (all channels) Use to adjust the levels of channel signals sent. 8 TASCAM M-164/M-164FX/M-164UF i PHONO ON switch (channels 9-10) Turn this switch ON (push switch in) when the output of a record player is connected to channels 9-10
  • TASCAM M-164UF | Owners Manual - Page 9
    each for channel 11-12, 13-14 and 15-16 pairs. When ON (switch pushed in), the post-fader signal (signal after being adjusted by the fader) is sent to the AUX 1 bus. ; SUB fader This is the SUB bus output fader. z ST fader This is the stereo bus output fader. 9 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 10
    when the PHANTOM (+48V) switch is ON. 10 TASCAM M-164/M-164FX/M-164UF * *M-164UFPOMZ . Cord holder Use this to hold the 164UF mixers, do not connect anything to this input jack if the internal effects return channels are set to channels 13-14 (INT. EFFECT RTN switch not pushed in). # 9-10, 11-12
  • TASCAM M-164UF | Owners Manual - Page 11
    2 − Names and Functions of Parts $* USB port (M-164UF ONLY) Connect the mixer to a computer from this port using the included USB cable. % 7-8 input jacks (standard jacks) The only made to the L/MONO input jack, the signal is sent to both left and right channels. TASCAM M-164/M-164FX/M-164UF 11
  • TASCAM M-164UF | Owners Manual - Page 12
    to be con- nected and set the mixer to standby. •• Plug in all pieces of TASCAM PS- 1225L). Use of a different AC adaptor could cause malfunction, generation of heat, fire or other trouble. •• Do not force the cord into the holder. Doing so could break the line. 12 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 13
    3 − Preparation for Use Connection example 1: Using an M-164 with multiple mics and for background music in a club External effect unit Connect mics to MIC (1-6) Stereo amplifier CD player Record player Headphones iPod TASCAM M-164/M-164FX/M-164UF 13
  • TASCAM M-164UF | Owners Manual - Page 14
    for Use Connection example 2: Using an M-164UF for recording in a home studio External effect unit Electronic keyboard Stereo amplifier Connect mics to MIC (1-6) 7-8 (L, R) Stereo amplifier Stereo amplifier CD player USB Rhythm machine Computer Headphones 14 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 15
    speakers. Each output pair has a dedicated fader, so you can set their levels independently with the mixer. •• By connecting the SUB OUTPUTS to a recorder, you can record the same stereo mix signal as mics, always connect the dynamic mics using balanced connections. TASCAM M-164/M-164FX/M-164UF 15
  • TASCAM M-164UF | Owners Manual - Page 16
    AUX 1 and 2 sends and balance. 16 TASCAM M-164/M-164FX/M-164UF ªª Channels 11-12 •• Connect a stereo sound source using RCA pin jack jacks (L, R). •• On M-164UF mixers, the stereo audio output from a computer connected by USB is also input to channels 11-12. The signals from these channels can also
  • TASCAM M-164UF | Owners Manual - Page 17
    , reverse the procedures above. Failure to do so might cause noise that could damage the equipment. Turning on the power 1 Turn the mixer power ON using the ON/STANDBY switch on the rear panel of the mixer. The indicator on the right of the meter panel lights. TASCAM M-164/M-164FX/M-164UF 17
  • TASCAM M-164UF | Owners Manual - Page 18
    4 − Using the mixer Adjusting levels After turning on the power, adjust the level of each input signal. The following explanation assumes that level meter lights when a signal is being input that is at the loudest level ordinarily expected. Input channel level meter 18 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 19
    scale on the mixer is highlighted). If 12 kHz. The MID band is a peaking EQ with 2.5 kHz as the central frequency. Use the EQ MID knob to boost or cut mid frequencies. The LOW band is a shelving EQ. Use the EQ LOW knob to boost or cut the frequency band below 100 Hz. TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 20
    on all M-164 mixers, as well as on channels 15-16 on M-164FX and M-164UF mixers and channels 11-12 on M-164UF. Turn this 164FX and M-164UF mixers, the AUX 2 signal is also sent to the internal effects. (See "Using internal effects (M-164FX and M-164UF)" on page 23.) 20 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 21
    switches on channels 13-14 on all M-164 mixers, as well as on channels 15-16 on M-164FX and M-164UF mixers and channels 11-12 on M-164UF, can be used to send post-fader mixer in advance, to allow monitoring of AUX 1. (See "Monitoring with headphones" on page 21.) TASCAM M-164/M-164FX/M-164UF 21
  • TASCAM M-164UF | Owners Manual - Page 22
    4 − Using the mixer M-164 Series mixer AUX SEND 1 jack PHONES jack AMP Stage monitor 3 Use the AUX MASTER 1 knob to adjust the overall level sent to the AUX use the SUB fader to adjust the overall level of the drums when balancing with the other sound sources. 22 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 23
    sent to the effects. 4 − Using the mixer No. Effect name 1 Hall 1 2 Hall 2 3 Room 1 4 Room 2 5 Room 3 6 Plate 1 7 Plate 2 8 Plate 3 9 Chorus 10 Flange 11 Delay 1 12 Delay 2 13 Chorus/Room 1 14 Chorus/ are explained in the list below by their corresponding numbers. TASCAM M-164/M-164FX/M-164UF 23
  • TASCAM M-164UF | Owners Manual - Page 24
    the input channel receiving the return signal. Using external effects External effects can also be used with this mixer. Channels 1-6, 7-8 and 9-10 can have an external effect applied by sending their signals to the -14 ON to also monitor the effect return signal. 24 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 25
    settings to use an analog record player with this mixer. •• Connect the record player audio output to the channel 9-10 input jacks on the rear panel of the mixer. •• Connect the record player grounding wire to the are not made, the playback sound will not be correct. TASCAM M-164/M-164FX/M-164UF 25
  • TASCAM M-164UF | Owners Manual - Page 26
    drivers on your computer. As described below, this is a simple process that uses the CD-ROM included with the M-164. Drivers are updated from time to time. You can download the latest version of the drivers from the TASCAM website . 26 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 27
    .exe" file on the driver. 4 When the language selection screen appears after a short time, use the up and down arrow keys to select the desired language and then click the "OK" button. 55 When the screen below appears, click the Install the driver button. TASCAM M-164/M-164FX/M-164UF 27
  • TASCAM M-164UF | Owners Manual - Page 28
    to launch the installer software. 3 Follow the instructions shown on screen to proceed with the installation. 4 After the computer restarts, connect the mixer. 9 When the following screen appears, reconnect the mixer (M-164UF) and the computer with the USB cable. 28 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 29
    mixer firmware. The latest firmware updater can be downloaded from our http://www.tascam.com website. Preparation 1: Install the latest driver on your computer. Preparation 2: Connect the M-164UF the device that is causing the problem using its device manager. •• If TASCAM M-164/M-164FX/M-164UF 29
  • TASCAM M-164UF | Owners Manual - Page 30
    LE4 Quick Start Guide (page 4). In the Mac OS X version, there is no Audio Performance setting in the control panel. The optimal buffer size can be set suitably in each audio application. See the manuals for the audio applications that you are using for details. 30 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 31
    6 − Troubleshooting Related to mixer settings Q: There is no sound from the speakers connected to the STEREO lowered, those channels cannot be monitored.) Related to recording with Cubase LE4 (M-164UF ONLY) For details see the Cubase LE4 Quick Start Guide (page 4). TASCAM M-164/M-164FX/M-164UF 31
  • TASCAM M-164UF | Owners Manual - Page 32
    dBV (-54 dBV with PHONO ON) Maximum input level: +11 dBV 11-12 input jacks Connectors: RCA pin jacks Circuit type: unbalanced Input impedance: 10 kΩ Nominal input level: -10 dBV Maximum input level: +11 dBV 32 TASCAM M-164/M-164FX/M-164UF 15-16 input jacks Connectors: 3-pole mini-jack (tip: L, ring
  • TASCAM M-164UF | Owners Manual - Page 33
    45 mW + 45 mW (1% THD, for 32Ω load) •• Illustrations in this Owner's Manual might differ from the appearance of the actual product. •• In order to improve a product, width) x 112 (height) x 344.5 (depth) mm Weight: 3.3 kg (M-164), 3.4 kg (M-164FX), 3.5 kg (M-164UF) TASCAM M-164/M-164FX/M-164UF 33
  • TASCAM M-164UF | Owners Manual - Page 34
    7 − Specifications and Block Diagrams Dimensional drawing 390 mm 112 mm 349.3 mm 344.5 mm 34 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 35
    R L R P L R L P P P PP 7 − Specifications and Block Diagrams Block diagram TASCAM M-164/M-164FX/M-164UF 35 M-164 Block Diagram MIC P LINE L/MONO R L R L R L/MONO R
  • TASCAM M-164UF | Owners Manual - Page 36
    7 − Specifications and Block Diagrams Level diagram 36 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 37
    Notes TASCAM M-164/M-164FX/M-164UF 37
  • TASCAM M-164UF | Owners Manual - Page 38
    Notes 38 TASCAM M-164/M-164FX/M-164UF
  • TASCAM M-164UF | Owners Manual - Page 39
    Notes TASCAM M-164/M-164FX/M-164UF 39
  • TASCAM M-164UF | Owners Manual - Page 40
    164 TEAC CORPORATION Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan www.tascam.jp TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA www.tascam 1Z8, Canada www.tascam.com TEAC MEXICO, TEAC UK LIMITED www.tascam.co.uk Phone: +
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
D01083020A
M-164
M-164FX
M-164UF
Analog Mixer
OWNER'S MANUAL