TASCAM SERIES 208i Update procedures

TASCAM SERIES 208i Manual

Get TASCAM SERIES 208i PDF manuals and user guides View all TASCAM SERIES 208i manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM SERIES 208i manual content summary:

  • TASCAM SERIES 208i | Update procedures - Page 1
    and save it on the computer to be used with the unit. 2. Open the saved driver (zip file) on, for example, the computer desktop. 3. After uncompression, double-click the installation procedures in "Installing the Mac software" in the Owner's Manual. 0619.MA-2973A 1 TASCAM SERIES 102i / SERIES 208i
  • TASCAM SERIES 208i | Update procedures - Page 2
    SERIES 102i / SERIES 208i Procedures for updating the firmware Preparing oo Before updating firmware, follow the instructions in the Owner's Manual to install the following. Windows: Windows Settings Panel Mac: Mac Settings Panel This document assumes that the above software has already been
  • TASCAM SERIES 208i | Update procedures - Page 3
    the updater. ii If the unit and computer are not connected, "Supported hardware is not connected." will appear. If this happens, check the that the unit and the computer are connected by a USB cable • Confirm that the USB indicator on the unit is lit 5. Click the "OK TASCAM SERIES 102i / SERIES 208i
  • 1
  • 2
  • 3
TASCAM
SERIES 102i / SERIES 208i
1
SERIES 102i / SERIES 208i
Checking the software/firmware
versions
Before beginning to update the software/firmware, check the
software/firmware version of the SERIES 102i / SERIES 208i being
used.
For details about how to check the software/firmware version,
see “INFORMATION page“ in “5 – Using the Settings Panel” of the
Reference Manual.
INFORMATION page
Procedures for updating the
computer software
Preparing
o
If the latest software has already been installed, there is no
need to update it. Use it as is.
o
Disconnect all cables connected to the unit.
o
Set the phantom power switch to off.
Updating the dedicated software for
Windows or Mac
For Windows
1.
Download the latest Windows software for the operating
system you are using from the TEAC Global Site (http://teac-
global.com/) and save it on the computer to be used with
the unit.
2.
Open the saved driver (zip file) on, for example, the
computer desktop.
3.
After uncompression, double-click the “TASCAM_
SERIES_102i_208i_Installer_x.xx.exe” (x.xx is the version
number) file to automatically start the installer software.
4.
After this, follow the installation procedures in “Installing
the Windows software” in the Owner’s Manual.
For Mac
NOTE
Depending on the Gatekeeper setting, a warning message
might appear during installation. For information about
Gatekeeper, see “Working with Gatekeeper” in “3 - Installation”
of the Reference Manual.
1.
Download the latest Mac software for the operating system
you are using from the TEAC Global Site (http://teac-global.
com/) and save it on the computer to be used with the unit.
2.
Double-click “TASCAM_SERIES_102i_208i_Installer_x.
xx.dmg” (x.xx is the version number), which is the saved
disk image file for the Settings Panel, and double-click
“SERIES_102i_208i_Installer.pkg” inside the folder that
opens.
NOTE
Depending on the computer’s settings, the downloaded ZIP
file might not have opened automatically. In this case, unzip
the ZIP file to access the disk image file.
3.
When the installer starts, click the “Continue” button.
4.
After this, follow the installation procedures in “Installing
the Mac software” in the Owner’s Manual.
0619.MA-2973A