TASCAM US-125M Owners Manual

TASCAM US-125M Manual

Get TASCAM US-125M PDF manuals and user guides View all TASCAM US-125M manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM US-125M manual content summary:

  • TASCAM US-125M | Owners Manual - Page 1
    D01160020A US-125M USB Mixing Audio Interface OWNER'S MANUAL
  • TASCAM US-125M | Owners Manual - Page 2
    This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful equipment, please contact your city office, waste disposal service or the shop where you purchased the equipment. 2 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 3
    equivalent type. •• Caution should be taken when using earphones or headphones with the product because excessive sound pressure (volume) from earphones or headphones can cause hearing loss. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. TASCAM US-125M 3
  • TASCAM US-125M | Owners Manual - Page 4
    Mac OS X...14 Audio application settings...16 Stand-alone operation...16 5 - Troubleshooting 17 6 - Specifications 19 AD/DA convertor...19 Inputs and outputs...19 Analog audio inputs and outputs 19 4 TASCAM US-125M Digital input and output...19 Audio performance...19 Computer requirements...20
  • TASCAM US-125M | Owners Manual - Page 5
    − Introduction Thank you very much for purchasing a TASCAM US-125M Mixing Audio Interface. Please read this manual thoroughly before using the unit so that you understand correct operating procedures and can use its functions fully. We hope that you enjoy using this unit for many years. Please keep
  • TASCAM US-125M | Owners Manual - Page 6
    how to use the unit. NOTE These provide additional explanations and describe special cases. CAUTION Failure to follow these instructions could result emission of heat, do not place anything on top of this product. 6 TASCAM US-125M •• Do not place this product on top of a powered amplifier or other
  • TASCAM US-125M | Owners Manual - Page 7
    are connected to the PHONES jack, no signal is output from these jacks. i USB port Use the included USB cable to connect a computer to the interface here. Power is supplied to the unit through the USB port from the computer or a TASCAM PS-P515U AC adaptor (sold separately). TASCAM US-125M 7
  • TASCAM US-125M | Owners Manual - Page 8
    the USB cable. TASCAM PS-P515U (sold separately) AC power outlet USB plug CAUTION Use only a TASCAM PS-P515U AC adaptor (sold separately), which conforms to the specifications of this unit. Use of an adaptor other than this model could cause malfunction, fire or electric shock. 8 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 9
    instrument input) jack, which supports high impedance input, on use a condenser microphone that requires it, you will need to prepare an external phantom power supply. •• The MIC output sound is centered in the stereo field. OUT Keyboard, drum machine, music player, game device, etc. TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 10
    using a headset, connect the microphone output to the MIC IN jack (3.5mm mini-jack) on the front of the interface. Headset Headphones NOTE When headphones are connected, sound will not be output from the LINE OUT jacks. Disconnect headphones when you want to use external speakers. 10 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 11
    CODEC. Next, click Properties at the bottom right of the window. 3 Click the Playback tab, click Speakers USB Audio CODEC, and click the
Set Default button. This moves the green check mark to Speakers USB Audio CODEC. Click the Levels tab of the Microphone Properties window. TASCAM US-125M 11
  • TASCAM US-125M | Owners Manual - Page 12
    or 2 channel, 16-bit, 48000 Hz (DVD quality). 5 To adjust the input levels, use the input knobs (MIC, INST, LINE and COMPUTER) on the front of the interface. Adjust using the mixer. ON: Use for live Internet broadcasts, for example. OFF: Use with an audio application, for example. 12 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 13
    the Default device under both Sound playback and Sound recording to USB Audio CODEC. Click the Levels tab of the Speakers Properties window. 4 To adjust the input levels, use the input knobs (MIC, INST, LINE and COMPUTER) on , click OK at the bottom of the windows to close them. TASCAM US-125M 13
  • TASCAM US-125M | Owners Manual - Page 14
    Audio CODEC if the microphone icon does not already appear by it, and select Use this device for sound input. As necessary, set the Format setting for both Input and Output to the same sampling frequency and number of channels/bit-rate as the audio application that you are using. 14 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 15
    . OFF: Use with an audio application, for example. Loop mix switch Use the sliders to set the 1 and 2 Volume levels to their maximum. Do not check the Mute boxes. Quit Audio MIDI Setup after you finish making the settings. Mac OS X 10.6.8/10.7.1 Mac OS X 10.5.8 and earlier TASCAM US-125M 15
  • TASCAM US-125M | Owners Manual - Page 16
    -alone operation, since the unit is not connected to a computer, there is no input via USB, but all the other inputs and outputs function and can be used in the same ways as when the unit is powered by USB. Inputs Mic, instrument, stereo line Outputs Stereo line, stereo headphones 16 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 17
    . If you are still unable to resolve your problems please contact TASCAM customer support with the following information about the operating environment and details about the trouble. Please see the back of this manual for contact information. Operating environment •• Computer manufacturer •• Model
  • TASCAM US-125M | Owners Manual - Page 18
    Troubleshooting Click Settings in the Performance section. 18 TASCAM US-125M 4. On the Performance Option screen, select - Settings" of this manual and check the settings of the interface. „„ The sound higher priority than the one that you want to use for microphone signal input. „„ Sound cannot be heard
  • TASCAM US-125M | Owners Manual - Page 19
    (32Ω load, THD 0.1% or less) Digital input and output USB port Connector: USB B-type 4-pin Formats: USB 2.0 HIGH SPEED (480 MHz) USB 2.0 FULL SPEED (12 MHz USB 1.1 equivalent) Audio performance Frequency response 20 Hz-20 kHz, , OUTPUT knob set at −10 dB below maximum, JEITA) TASCAM US-125M 19
  • TASCAM US-125M | Owners Manual - Page 20
    . Supported operating systems Windows: Windows XP 32-bit/64-bit Windows Vista 32-bit/64-bit Windows 7 32-bit/64-bit Mac OS X: Mac OS X 10.3.9 or later Driver Windows: WDM (Windows standard driver) Mac OS X: Core Audio (Macintosh standard driver) General Power By USB from a computer Using a TASCAM PS
  • TASCAM US-125M | Owners Manual - Page 21
    Notes TASCAM US-125M 21
  • TASCAM US-125M | Owners Manual - Page 22
    Notes 22 TASCAM US-125M
  • TASCAM US-125M | Owners Manual - Page 23
    Notes TASCAM US-125M 23
  • TASCAM US-125M | Owners Manual - Page 24
    US-125M TEAC CORPORATION Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan http://tascam.jp/ TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA http://tascam.com/ TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
US-125M
USB Mixing Audio Interface
D01160020A
OWNER'S MANUAL