TASCAM US-1x2HR Reference Manual

TASCAM US-1x2HR Manual

Get TASCAM US-1x2HR PDF manuals and user guides View all TASCAM US-1x2HR manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM US-1x2HR manual content summary:

  • TASCAM US-1x2HR | Reference Manual - Page 1
    D01386220B US-1x2HR USB Audio Interface REFERENCE MANUAL Before connecting this unit to a computer, you must download and install dedicated software on the computer.
  • TASCAM US-1x2HR | Reference Manual - Page 2
    General...19 Input/output ratings 19 Analog inputs 19 Analog outputs 19 Control input/output ratings 19 Audio performance 19 Computer system requirements 20 Windows 20 Mac...20 iOS device 20 Supported audio drivers 20 Other...20 Dimensional drawings 21 Block diagram 21 2 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 3
    Mac) o USB Type-C port (USB 2.0 standard) o Support for operation on USB bus power o US-HR Settings Panel control software has a simple, functional design and enables making unit settings o High-performance driver can be set to minimal buffer sizes and enables recording setups with super-low latency
  • TASCAM US-1x2HR | Reference Manual - Page 4
    (9) input sources. Set to LINE when connecting electronic instruments, audio devices and similar equipment. Set to INST when connecting a on page 9 for details. e Kensington Security Slot r USB port This is a USB Type-C port. Use a USB cable to connect the unit to a computer or an TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 5
    requirements Mac with a USB 2.0 (or higher) port CPU/processor speed 2 GHz or faster dual core processor Memory 2 GB or more Apple iOS devices Supported operating systems iPadOS13 iOS13 iOS12 iOS11 Supported audio drivers Windows ASIO2.0, WDM Mac Core Audio iOS device Core Audio TASCAM US-1x2HR 5
  • TASCAM US-1x2HR | Reference Manual - Page 6
    "Found New Hardware Wizard" launched, close the Wizard and disconnect the USB cable. Windows dedicated software installation procedures 1. Download the latest Windows dedicated the computer display, and click "Skip obtaining driver software from Windows Update" to stop the search. 6 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 7
    the unit to it with the USB cable. i Depending on the US-HR_Installer.pkg' can't be opened because it was not downloaded from the Mac App Store." In this case, click the "OK" button to close the message. Then, control-click (or right-click) the file and click "Open" in the menu. TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 8
    8.1/Windows 7). 2. Select "TASCAM US-HR version x.xx" from the list, and double-click it. 3. Then, follow the instructions that appear on the screen. Uninstalling the Mac dedicated software Delete "US-HR_SettingsPanel" from the Applications folder to complete uninstallation. 8 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 9
    , overheating, fire or other problems. If anything abnormal occurs, stop use and contact the retailer where you purchased the unit or a TASCAM customer support service to request repair. Mic Headphones Guitar Computer Powered speakers Examples of connections to a US-1x2HR TASCAM US-1x2HR 9
  • TASCAM US-1x2HR | Reference Manual - Page 10
    this unit to a separate USB port. Connecting USB keyboards and mice, however, to the same bus should not be a problem. Connecting with iOS devices player to this unit, a phono amp and equalizer (or an audio amplifier that has phono input jacks) must be connected between them. . 10 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 11
    , for example) in the DAW or other recording software. Input signals could be added to computer output signals, resulting in the doubling of sounds. 4 - Preparation TASCAM US-1x2HR 11
  • TASCAM US-1x2HR | Reference Manual - Page 12
    or Mac Settings Panel. i The Settings Panel cannot be used with an iPad or other iOS device. i To change unit settings, use the Settings Panel the audio input and output signals transferred to and from the computer. Smaller buffer sizes result in less audio signal delay (latency), but TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 13
    input even though Loopback is set to "Stereo" (stereo input is not supported), "Mono" Loopback must be used. In this case, set both Input signals are converted to mono or kept as stereo when looping back USB output Options: Mono, Stereo (default) 9 BROADCAST Volume slider Use to TASCAM US-1x2HR 13
  • TASCAM US-1x2HR | Reference Manual - Page 14
    being shown the next time it is launched. i After closing the update window, you can reopen it by selecting "Update" from the "Help" menu. 14 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 15
    USB communication with the unit. i The unit will operate with the factory default settings or the settings as have been changed using a Windows/Mac computer. Factory default settings for the unit o Direct Monitor Settings: Mono o Audio Input: ON o Loopback: OFF o Auto Power Save: ON TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 16
    from the output jacks. In addition, when operating in standalone mode, the USB indicator will blink. Settings Panel settings The current (most recently made) settings are retained for the following items on the Settings Panel. o Direct Monitor Settings IN 1-2 o Auto Power Save 16 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 17
    Troubleshooting Please read this chapter if you are unable to use the unit properly even after setting it up following the procedures in this manual. If you are still unable to resolve your problems please contact TASCAM customer support as an output signal from the computer. TASCAM US-1x2HR 17
  • TASCAM US-1x2HR | Reference Manual - Page 18
    latency) in the audio (Metro user interface screen) and then Support for bundled software, including DAW software TASCAM does not provide end-user support for the bundled DAW Software. Please check the Help menu of the installed software to find where this support is available. 18 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 19
    , into 32Ω load) Control input/output ratings USB Connector: 4-pin USB Type-C Transfer rate: USB 2.0 High Speed (480 Mbps) DC IN 5V Connector: USB Micro B type Audio performance Mic preamp EIN (equivalent input noise) −128 IN to LINE OUT, 1 kHz sine wave, GAIN knob at minimum) TASCAM US-1x2HR 19
  • TASCAM US-1x2HR | Reference Manual - Page 20
    USB Camera Adapter (sold separately) is necessary. Supported audio drivers Windows ASIO2.0, WDM Mac Core Audio iOS device Core Audio Other Power Used with a computer USB bus power Used with an iOS device USB protrusions) Weight 623 g Operating temperature range 5-35 °C (41 - 95°F) 20 TASCAM US-1x2HR
  • TASCAM US-1x2HR | Reference Manual - Page 21
    Select SIG/PEAK Audio Input ON Loop back IN 2 GAIN ADC SIG/PEAK Audio Input ON LINE IN L LINE IN R Direct Monitor LR Monitor Balance Broadcast Loop back LR PHONES PHONES Input USB Output LINE OUT L LINE OUT R LINE OUT Output DAC Computer Out 1 Computer Out 2 TASCAM US-1x2HR 21
  • TASCAM US-1x2HR | Reference Manual - Page 22
    : +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan https://tascam.jp/jp/ TEAC AMERICA, INC. Phone: +1-323-726-0303 10410 Pioneer Blvd. Suite #1 Santa Fe Springs, California 90670, U.S.A. https://tascam.com/us/ TEAC UK Ltd. Phone: +44-1923-797205 Luminous House, 300 South Row, Milton
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
D01386220B
US-1x2HR
USB Audio Interface
REFERENCE MANUAL
Before connecting this unit to a computer, you must download and install dedicated software on the computer.