TASCAM US-2x2HR Reference Manual

TASCAM US-2x2HR Manual

Get TASCAM US-2x2HR PDF manuals and user guides View all TASCAM US-2x2HR manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM US-2x2HR manual content summary:

  • TASCAM US-2x2HR | Reference Manual - Page 1
    D01385920B US-2x2HR US-4x4HR USB Audio/MIDI Interface REFERENCE MANUAL Before connecting this unit to a computer, you must download and install dedicated software on the computer.
  • TASCAM US-2x2HR | Reference Manual - Page 2
    update function 16 6 - Application Guide 17 DAW software 17 Bundled DAW software 8 - MIDI Implementation Chart 19 9 - Troubleshooting 20 10 - Specifications 22 General...22 Input Supported audio drivers 23 Other...23 Dimensional drawings 24 Block diagram 25 2 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 3
    low latency o Loopback function that supports stereo/mono switching of inputs and outputs (on Windows/Mac) o USB Type-C port (USB 2.0 standard) o Support for operation on USB bus power o US- document are the trademarks or registered trademarks of their respective owners. 3 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 4
    port on the computer. If there is a problem with the power supply, the phantom power indicator TASCAM US-2x2HR/US-4x4HR 9 IN1/IN2 jacks On the US-2x2HR, these are XLR/TRS combo jacks for analog input. On the US-4x4HR, these are separate XLR and standard TRS jacks for analog input. These support
  • TASCAM US-2x2HR | Reference Manual - Page 5
    it off and turn it on again or disconnect and reconnect the USB cable. o DC IN 5V connector (US-2x2HR only) When connected to an iOS device or other equipment that cannot power this unit, a dedicated AC adapter an iOS device or other equipment that cannot power this unit 5 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 6
    2.0 (or higher) port CPU/processor speed 2 GHz or faster dual core processor Memory 2 GB or more Apple iOS devices Supported operating systems iPadOS13 iOS13 iOS12 iOS11 Supported audio drivers Windows ASIO2.0, WDM, MIDI Mac Core Audio, Core MIDI iOS divice Core Audio 6 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 7
    unit by USB to the computer after installing the software, installation of the device driver will be executed. Some time might be necessary before the unit is recognized because display, and click "Skip obtaining driver software from Windows Update" to stop the search. 7 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 8
    is "Allow applications downloaded from: the Mac App Store" The following security warning might be shown: "'US-HR_Installer.pkg' can't be opened because it was not downloaded from the Mac App Store." 8 TASCAM US-2x2HR/US-4x4HR In this case, click the "OK" button to close the message. Then, control
  • TASCAM US-2x2HR | Reference Manual - Page 9
    Windows 7). 2. Select "TASCAM US-HR version x.xx" from the list, and double-click it. 3. Then, follow the instructions that appear on the screen. Uninstalling the Mac dedicated software Delete "US-HR_Settings Panel" from the Application folder to complete uninstallation. 9 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 10
    Using a power supply device with specifications other than the above could cause malfunction, overheating, fire or other problems. If trouble should occur, stop using the unit and contact the retailer where you purchased it or a TEAC service center to request repair. 10 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 11
    example of US-4x4HR connections. Precautions before making connections o Carefully read the operation manuals of the service center (on the back cover) to request repair. Headphones Mic Powered speakers Sequencer/ rhythm machine Computer Examples of connections to a US-4x4HR TASCAM US-2x2HR/US
  • TASCAM US-2x2HR | Reference Manual - Page 12
    a separate USB port. Connecting USB keyboards and mice, however, to the same bus should not be a problem. Connecting with iOS devices To connect with an iOS device that has a Lightning connector use a Lightning to unit and set their MIC/LINE INST switches to MIC/ LINE. 12 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 13
    to send and receive MIDI timecode (MTC). By doing this, you can use an application that supports MTC to synchronize a multitrack recorder (MTR) and MIDI devices. ATTENTION i The USB indicator might stay to computer output signals, resulting in the doubling of sounds. TASCAM US-2x2HR/US-4x4HR 13
  • TASCAM US-2x2HR | Reference Manual - Page 14
    or Mac Settings Panel. i The Settings Panel cannot be used with an iPad or other iOS device. i To change unit settings, use the Settings Panel will be stereo. Signals sent from the computer depend on the Loopback setting. 2 Audio Input ON switches Turn input on/off for TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 15
    . Smaller buffer sizes result in less audio signal delay (latency), but require high-speed processing by the computer. If the only one channel is input even though Loopback is set to "Stereo" (stereo input is not supported), "Mono" Loopback must be used. In this case, set TASCAM US-2x2HR/US-4x4HR 15
  • TASCAM US-2x2HR | Reference Manual - Page 16
    being shown the next time it is launched. i After closing the update window, you can reopen it by selecting "Update" from the "Help" menu. 16 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 17
    instructions about downloading, installing and making settings in these applications. Other DAW software When using any other DAW software, consult its operation manual. When using a DAW that supports ASIO, select "US (US-4x4HR only) o Loopback: OFF o Auto Power Save: ON TASCAM US-2x2HR/US-4x4HR 17
  • TASCAM US-2x2HR | Reference Manual - Page 18
    (most recently made) settings are retained for the following items on the Settings Panel. o Direct Monitor Settings IN 1-2 o Direct Monitor Settings IN 3-4 (US-4x4HR only) o Auto Power Save LINE OUT 1-2 and LINE OUT 3-4 (US-4x4HR only) settings are fixed to "Monitor Mix". 18 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 19
    , POLY Mode 2: OMNI ON, MONO Mode 4: OMNI OFF, MONO Recognize - - - - -: YES -: NO Remarks Thru Thru Thru Thru Thru Thru Thru Thru Thru Thru Thru Thru TASCAM US-2x2HR/US-4x4HR 19
  • TASCAM US-2x2HR | Reference Manual - Page 20
    Troubleshooting Please read this chapter if you are unable to use the unit properly even after setting it following the procedures in this manual. If you are still unable to resolve your problems please contact TASCAM customer support an output signal from the computer. 20 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 21
    Troubleshooting Set the buffer size (latency) in the audio Support for bundled software, including DAW software TASCAM does not provide end-user support for the bundled DAW Software. Please check the Help menu of the installed software to find where this support is available. TASCAM US-2x2HR/US
  • TASCAM US-2x2HR | Reference Manual - Page 22
    level: −6 dBV (0.501 Vrms) Gain range: 56 dB Input impedance: 1 MΩ or more Line inputs (balanced) US-2x2HR: IN1/IN2 US-4x4HR: IN1/IN2, IN3/IN4 (MIC/LINE INST switch set to MIC/LINE) Connectors: 6.3mm (1/4") standard TRS jack OUT, 1 kHz sine wave, GAIN knob at minimum) 22 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 23
    Supported audio drivers Windows ASIO2.0, WDM, MIDI Mac Core Audio, Core MIDI iOS divice Core Audio Other Power Used with a computer USB bus power or connected to the dedicated AC adapter below Used with an iOS device Connected to the dedicated AC adapter below US-2x2HR: Dedicated AC adapter (TASCAM
  • TASCAM US-2x2HR | Reference Manual - Page 24
    Dimensional drawings US-2x2HR 160 160 186 65 US-4x4HR 296 65 o Illustrations in this reference manual might differ in part from the actual product. o Specifications and external appearance might be changed without notification to improve the product. 24 TASCAM US-2x2HR/US-4x4HR
  • TASCAM US-2x2HR | Reference Manual - Page 25
    ON 10 - Specifications Loop back MIC/LINE 48V IN3 MIC/LINE 48V IN4 only US-4ｘ４HR GAIN SIG/PEAK Audio Input ON GAIN ADC SIG/PEAK Audio Input ON Direct LINE OUT 1-2 DAC LINE OUT 3-4 DAC only US-4ｘ４HR Computer Out 1 Computer Out 2 Computer Out 3 Computer Out 4 TASCAM US-2x2HR/US-4x4HR 25
  • TASCAM US-2x2HR | Reference Manual - Page 26
    : +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan https://tascam.jp/jp/ TEAC AMERICA, INC. Phone: +1-323-726-0303 10410 Pioneer Blvd. Suite #1 Santa Fe Springs, California 90670, U.S.A. https://tascam.com/us/ TEAC UK Ltd. Phone: +44-1923-797205 Luminous House, 300 South Row, Milton
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
D01385920B
US-2x2HR
US-4x4HR
USB Audio/MIDI Interface
REFERENCE MANUAL
Before connecting this unit to a computer, you must download and install dedicated software on the computer.