TASCAM US-2x2HR Specifications

TASCAM US-2x2HR Manual

TASCAM US-2x2HR manual content summary:

  • TASCAM US-2x2HR | Specifications - Page 1
    Product Spec Sheet USB Audio/MIDI Interface US-2x2HR US-2x2HR Nov, 2020 ■ Specifications General Sampling frequencies 44.1, 48, 88.2, 96, 176.4, 192 kHz Quantization bit depth 24-bit Input/output ratings ・Analog inputs Mic inputs (
  • TASCAM US-2x2HR | Specifications - Page 2
    US-2x2HR Line inputs (balanced) IN1/IN2 (MIC/LINE INST switch set to MIC/LINE) Connectors: 6.3 mm (1/4") standard TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND) Maximum
  • TASCAM US-2x2HR | Specifications - Page 3
    US-2x2HR 0.0011% (LINE IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL Check the TEAC Global Site (https://teac-global.com/) for the latest information about supported operating systems. ・Windows Supported operating systems Windows 10 32-bit Windows 10 64-bit Windows 8.1 32-bit
  • TASCAM US-2x2HR | Specifications - Page 4
    US-2x2HR To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary. ・Supported audio drivers range 5 - 35゜C (41 - 95゜F) ■ Dimensional drawings ※TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other
  • 1
  • 2
  • 3
  • 4

US-2x2HR
0110a
-
1-
Nov, 2020
Product Spec Sheet
USB Audio/MIDI Interface
US-2x2HR
Specifications
General
Sampling frequencies
44.1, 48, 88.2, 96, 176.4, 192 kHz
Quantization bit depth
24-bit
Input/output ratings
Analog inputs
Mic inputs (balanced)
IN1/IN2
Connectors:
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Maximum input level:
+9 dBu (2.183 Vrms)
Rated input level:
7 dBu (0.346 Vrms)
Gain range:
56 dB
Input impedance:
2.2 kΩ
Instrument inputs (unbalanced)
IN1/IN2
(MIC/LINE INST switch set to INST)
Connectors:
6.3
mm (1/4”) standard TS jacks
(Tip: HOT, Sleeve: GND)
Maximum input level:
+10 dBV (3.162 Vrms)
Rated input level:
6 dBV (0.501 Vrms)
Gain range:
56 dB
Input impedance:
1 MΩor more