TASCAM US-42B MiNiSTUDIO CREATOR Update procedures

TASCAM US-42B MiNiSTUDIO CREATOR Manual

Get TASCAM US-42B MiNiSTUDIO CREATOR PDF manuals and user guides View all TASCAM US-42B MiNiSTUDIO CREATOR manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM US-42B MiNiSTUDIO CREATOR manual content summary:

  • TASCAM US-42B MiNiSTUDIO CREATOR | Update procedures - Page 1
    /) and save it on the computer to be used with the unit. 2. Open the saved driver (zip file) on, for example, the computer desktop. 3. After uncompression, double-click the " procedures in "Installing the Mac software" in the Owner's Manual. 1 TASCAM MiNiSTUDIO PERSONAL US-32 / CREATOR US-42
  • TASCAM US-42B MiNiSTUDIO CREATOR | Update procedures - Page 2
    MiNiSTUDIO PERSONAL US-32 / CREATOR US-42 Procedures for updating the firmware Preparing • Before updating firmware, follow the instructions in the Owner's Manual and computer are not connected, "Supported hardware is not connected." will appear. TASCAM MiNiSTUDIO PERSONAL US-32 / CREATOR US-42
  • TASCAM US-42B MiNiSTUDIO CREATOR | Update procedures - Page 3
    case, click the button to close the updater. • If the unit and computer are not connected, "Supported hardware is not connected." will appear. If this happens, check the following. • Confirm that the power off and on again once before using it. 3 TASCAM MiNiSTUDIO PERSONAL US-32 / CREATOR US-42
  • 1
  • 2
  • 3
MiNiSTUDIO PERSONAL US-32 / CREATOR US-42
TASCAM
MiNiSTUDIO PERSONAL US-32 / CREATOR US-42
1
Checking the software/firmware versions
Before beginning to update the software/firmware, check the software/firmware version of the
MiNiSTUDIO PERSONAL US-32 /
CREATOR US-42
being used.
For details about how to check the software/firmware version, See “EASY page” in “Settings Panel overview” of the
Reference Manual.
MiNiSTUDIO PERSONAL US-32 EASY page
MiNiSTUDIO PERSONAL US-42 EASY page
Procedures for updating the computer software
Preparing
•
If the latest software has already been installed, there is no need to update it. Use it as is.
•
Disconnect all cables connected to the unit.
•
Set the phantom power switch to off.
Updating the dedicated software for Windows or Mac
8
For Windows
1.
Download the latest Windows software for the operating
system you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to be used
with the unit.
2.
Open the saved driver (zip file) on, for example, the
computer desktop.
3.
After uncompression, double-click the “
TASCAM_
MiNiSTUDIO_Installer_X.XX.exe
” (“x.xx” is the number
of driver version) file to automatically start the installer
software.
4.
After this, follow the installation procedures in “Installing the
Windows software” in the Owner's Manual.
8
For Mac
NOTE
Depending on the Gatekeeper setting, a warning message
might appear during installation. For information about
Gatekeeper, see “Working with Gatekeeper” in “Installing
the dedicated software” of the Owner's Manual.
1.
Download the latest Mac software for the operating system
you are using from the TEAC Global Site (http://teac-global.
com/) and save it on the computer to be used with the unit.
2.
Double-click “
TASCAM_MiNiSTUDIO_Installer_X.
XX.dmg
” (“x.xx” is the number of software version), which is
the saved disk image file for the Settings Panel, and double-
click “
MiNiSTUDIO_Installer.pkg
” inside the folder that
opens.
NOTE
Depending on the computer’s settings, the downloaded ZIP
file might not have opened automatically. In this case, unzip
the ZIP file to access the disk image file.
3.
When the installer starts, click the “Continue” button.
4.
After this, follow the installation procedures in “Installing the
Mac software” in the Owner's Manual.