TP-Link Archer AX72 Pro Archer AX72 ProUS V1.6 User Guide
TP-Link Archer AX72 Pro Manual
View all TP-Link Archer AX72 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer AX72 Pro manual content summary:
- TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 1
User Guide AX5400 Multi-Gigabit Wi-Fi 6 Router Archer AX72 Pro © 2023 TP-Link 1910013307 REV1.0.0 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 2
Contents About This Guide 1 Chapter 1. TP-Link Tether App 14 4. 3. Manually Set Up Your Internet Connection 15 4. 4. Set Up the Router as an Access Point 18 4. 5. Set Up an IPv6 Internet Connection 18 Chapter 5. TP-Link Cloud Service 22 5. 1. Register a TP-Link ID 23 5. 2. Change Your TP-Link - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 3
7. 3. Use WPS for Wireless Connection 35 7. 3. 1.Connect via the Client's PIN 35 7. 3. 2.Connect via the Router's PIN 36 7. 3. 3.Push the WPS Button 36 7. 4. Advanced Wireless Settings 36 Chapter 8. Guest Network 39 8. 1. Create a Network for Guests 40 8. 2. Set Up Portal Authentication for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 4
Link Aggregation 97 15. 3. Configure to Support IPTV Service 98 15. 4. Specify DHCP Server Settings 99 15. 5. Set Up a Dynamic DNS Service Account and Restore Configuration Settings 108 16. 3. Change the Login Password 109 16. 4. Password Recovery 110 16. 5. Local Management 111 16. 6. Remote - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 5
Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide Download Center at https://www.tp-link.com/support/download/. The Quick Installation Guide can be found where you find this guide or inside the package of - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 6
for feature availability may be required. *Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions. 2 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 7
Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 8
ac. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. to right) are located on the front. You can check the router's working status by following the LED Explanation table. LED Explanation Name (Power) (2.4 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 9
The 5 GHz wireless band is enabled. Off The 5 GHz wireless band is disabled. Green On Internet service is available. Orange On The router's Internet port is connected, but the internet service is not available. Off The router's Internet port is unplugged. On At least one powered-on device - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 10
or off the wireless function of your router. Press and hold the button until the Power LED blinks to reset the router to its factory default settings. For connecting your PC or other wired devices to the router. For connecting to your modem, the Ethernet outlet or other internet devices. Used - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 11
Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 12
Chapter 2 Connect the Hardware 2. 1. Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected to multiple devices as well as to a power source. • Make sure the cables and - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 13
off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 14
Connect automatically Connect Smart Device < Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... OR TP-Link_XXXX TP-Link_XXXX_5G Other... • Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 15
Chapter 3 Log In to Your Router - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 16
router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer. 2. Visit http://tplinkwifi.net, and create a login password for secure management purposes. Then click Let's Get Started to log in. Note: If the login window does not appear, please refer to the FAQ - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 17
successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 18
service from TP-Link (remote management, TP-Link DDNS, and more.), log in with your TP-Link ID or click Sign Up Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID. Note: • To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 19
in with your TP-Link ID or the password you set for the router. 2. Go to Internet. 3. Select a port for internet service. Make sure the cable is securely connected to this port on your router. 4. Select your internet connection type from the drop-down list. 5. Follow the instructions on the page - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 20
cable. 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 16 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 21
ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password, and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 17 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 22
to the FAQ section for further instructions. 4. 4. Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 23
Tips: • Functions, such as Parental Controls, QoS and NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the (Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3. - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 24
further information if your ISP requires. Click SAVE and then click Renew. 3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input accounts for the IPv4 and IPv6 connections, manually enter the username and password for the IPv6 connection. 20 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 25
Chapter 4 Set Up Internet Connection 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click SAVE and then click Connect. 5 ) Pass-Through ( - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 26
Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click SAVE. 6. Click Status to check whether you have successfully set up an IPv6 connection. Tips: Visit the FAQ section - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 27
Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app. To ensure that your - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 28
in with the password you set for the router. 2. Go to Advanced > TP-Link ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link ID page to log in. The TP-Link ID used to - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 29
Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click SAVE. 5. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 30
Chapter 5 TP-Link Cloud Service from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: • Reset the router to its factory default settings either on the web management page or in the Tether app. • Add/remove other TP-Link IDs to/ - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 31
the Tether app and log in with your TP-Link ID. Note: If you don't have a TP-Link ID, create one first. 3. Connect your device to the router's wireless network. 4. Go back to the Tether app, select the model of your router and log in with the password you set for the router. 5. Manage your - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 32
Chapter 6 Network Map - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 33
of your network visually and helps you manage general settings of the network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Network Map. 3. Click each network device icon to check and manage general network settings. • Click - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 34
Chapter 6 Network Map • Click Mesh Devices to view the devices that form a mesh network with the router. 30 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 35
Chapter 6 Network Map • Click Clients to view the client devices in your network. You can block devices so they cannot access your network, or set Speed Limit to limit their upload and download speeds. To limit the speeds of a device: 1. Click in the Speed Limit column. 2. Enable Speed Limit. 3. - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 36
Chapter 7 Wireless Settings This chapter guides you on how to configure the wireless settings. It contains the following sections: • Specify Wireless Settings • Schedule Your Wireless Function • Use WPS for Wireless Connection • Advanced Wireless Settings - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 37
your needs. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Wireless or Advanced > Noted that only when your clients also support OFDMA, can you fully enjoy the benefits. It is disabled by default. 1. Go to Advanced > Wireless > - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 38
. Wireless Settings 3. Keep the default values or set a new SSID and password, and click SAVE. This SSID and password will be applied for the 2. you scan for local wireless networks on your wireless device and you need to manually join the network. • To change the security option: 1. Go to Advanced - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 39
your wireless client devices. It is recommended to just leave it as default. • To use the MU-MIMO function: The MU-MIMO (Multi the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Wireless - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 40
Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Make sure the Wi-Fi of your router is on and go to Advanced > Wireless > WPS. 7. 3. 1. Connect via - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 41
a new one. Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 7. 3. 3. Push the WPS Button Click Start on the screen - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 42
Settings 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346. If the packet size - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 43
Chapter 7 Wireless Settings • Group Key Update Period - Enter a number of seconds (minimum 30) to control the time interval for the encryption key automatic renewal. The default value is 0, meaning no key renewal. 39 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 44
Chapter 8 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize the guest network according to your needs. It - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 45
log in with your TP-Link ID or the password you set for the router. 2. Go to Wireless and locate the Guest Network section. 3. Create a guest network as needed. 1 ) Enable 2.4GHz and/or 5GHz. 2 ) Customize the SSID. Don't select Hide SSID unless you want your guests to manually input the SSID for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 46
your shop. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Wireless and locate the network without any authentication. • If you select Simple Password, specify a password for authentication. 5. Specify the Authentication Timeout. When - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 47
of the login page. 8. Click SAVE. 8. 3. Limit the Bandwidth of the Guest Network 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Guest Network. 3. Enable Bandwidth Control for one or all networks as you need - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 48
can limit the bandwidth of the guest network. 8. 4. Specify the Effective Time of the Guest Network 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Guest Network. 44 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 49
time. The default value No Limit indicates that the guest network will always remain on. 4. Click SAVE. Now you can keep the guest network on only when you need it. 8. 5. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 50
Chapter 8 4. Click SAVE. Now you can ensure network security and privacy! Guest Network 46 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 51
the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 52
following table to access files stored on your USB storage device. • Method 1: Go to Computer > Network, then click the Network Server Name (TPSHARE by default) in the Computer section. Note: Operations in different systems are similar. Here we take Windows 7 as an example. Windows computer 48 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 53
2 ) Type the server address smb://tplinkwifi.net. 3 ) Click Connect. Mac 4 ) When prompted, select the Guest radio box. (If you have set up a username and a password to deny anonymous access to the USB disks, you should select the Registered User radio box. To learn how to set up an account for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 54
are not routed on the internet. Follow the steps below to configure remote access settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB > USB Storage Device. 3. Tick the Internet FTP checkbox, and then click SAVE - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 55
a Dynamic DNS Service Account to learn how to set up a domain name for you router. 9. 1. 3. Customize the Access Settings By default, all the network management page. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB > - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 56
Authentication for Data Security You can set up authentication for your USB storage device so that network clients will be required to enter username and password when accessing the USB storage device. 1. In the File Sharing section, enable Secure Sharing. 52 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 57
the following problems: • If the sharing password is also the same as the Windows password, authentication will not work since the from DLNA-supported devices, such as your computer, tablet and PS2/3/4. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 58
Computer Tablet • Use a third-party DLNA-supported player. 9. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 59
Chapter 9 3. Tick the checkbox to enable Time Machine. 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click SAVE. USB Settings 55 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 60
10 HomeShield Customize your home network with enhanced security using a kit of features built in TP-Link HomeShield. Whether protecting your sensitive data or limiting the access of kids and guests, TP-Link HomeShield provides you the tools you need to fully manage your network. It contains the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 61
Chapter 10 HomeShield 10. 1. Network Security TP-Link HomeShield provides many tools to protect your Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play. OR 2. Launch the Tether app and log in with your TP-Link ID. If you don't - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 62
family time • To use this feature, download Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play. OR 2. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first. 3. Log - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 63
Chapter 10 HomeShield 2. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first. 3. Log in to your router and tap the HomeShield tab to use this feature. 59 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 64
Chapter 11 OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMeshTM feature. It contains the following sections: • Set Up a OneMesh Network • Manage Devices in the OneMesh Network - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 65
with Seamless Roaming TP-Link OneMesh router and TP-Link OneMesh extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh's seamless coverage. INTERNET SAME Network Name & Password for seamless roaming - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 66
4. Connect a OneMesh extender to this router by following the setup instructions in the extender's manual. The extender will be listed on the router's OneMesh page. Note: To check full list of TP-Link OneMesh devices, visit https://www.tp-link.com/onemesh/compatibility. 5. If you have set up the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 67
on your router's web page. • To view mesh devices and connected clients in the network: 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Network Map. 3. Click to view all mesh devices, and click to view all connected clients. • To - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 68
Chapter 11 OneMesh with Seamless Roaming 4. Manage the OneMesh device as needed. You can: • Change device information. • Click Manage Device to redirect to the web management page of this device. • Click Leave OneMesh to delete this device from the OneMesh network. 64 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 69
Chapter 12 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 70
and validate the traffic that is passing through the router based on the protocol. This function is enabled by default. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Firewall. It's recommended to keep the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 71
successfully added to the blacklist. To allow specific device(s): 1 ) Select Whitelist and click SAVE. 2 ) Your own device is in the whitelist by default and cannot be deleted. Click to add other devices to the whitelist. • Add connected devices 1 ) Click Select From Device List. 2 ) Select the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 72
message will appear on the screen, which means the selected devices have been successfully added to the whitelist. • Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed and click ADD. 3 ) The Operation Succeeded message will - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 73
Security I want to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your device(s) according to - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 74
customized NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data" protocols applications do not work well with SIP ALG. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 75
IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 76
services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service .net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 77
: • It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. • If the service you want to use is not in the common services list, you can enter the corresponding parameters manually. You should verify the port number that - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 78
Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. • If you have changed the default External TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click . 3. Click VIEW COMMON SERVICES - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 79
application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 75 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 80
192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > DMZ by default in this router. • Only the application supporting UPnP protocol can use this feature. • UPnP feature needs the support of - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 81
without a hitch. INTERNET If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs. 77 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 82
your home network in a secured way through the internet. The router supports three types of VPN Server: OpenVPN is somewhat complex but with /IPSec VPN is more secure but slower than PPTP VPN, and may have trouble getting around firewalls. VPN Client allows devices in your home network to access - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 83
tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and tick the Enable box of OpenVPN. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 84
Chapter 14 VPN Server&Client 6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server. 7. Click SAVE. 8. Click GENERATE - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 85
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP. Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 86
Chapter 14 VPN Server&Client 3 ) Click ADD. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 87
Chapter 14 VPN Server&Client 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 83 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 88
Chapter 14 VPN Server&Client 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. Click Connect Now when the VPN connection is ready to use. 84 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 89
with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > L2TP/IPSec, and enable L2TP/IPSec. Note: • Firmware update may be required to support L2TP/IPSec VPN Server. • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 90
. 6. Configure the L2TP/IPSec VPN connection account for the remote device. You can create up to 16 accounts. 4 ) Click Add. 5 ) Enter the Username and Password to authenticate devices to the L2TP/IPSec VPN Server. 6 ) Click ADD. Step 2. Configure L2TP/IPSec VPN Connection on Your Remote Device 86 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 91
Chapter 14 VPN Server&Client The remote device can use the Windows or Mac OS built-in L2TP/IPSec software or a third-party L2TP/IPSec software to connect to L2TP/IPSec Server. Here we use the Windows built-in L2TP/IPSec software as an example. 1. Go to Start > Control Panel > Network and Internet - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 92
Internet address field, and select the checkbox Don't connect now; just set it up so I can connect later. Click Next. 6. Enter the User name and Password you have set for the L2TP/IPSec VPN server on your router, and click Connect. 88 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 93
Chapter 14 VPN Server&Client 7. Click Close when the VPN connection is ready to use 8. Go to Network and Sharing Center and click Change adapter settings. 89 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 94
Chapter 14 VPN Server&Client 9. Find the VPN connection you created, then double-click it. 10. Enter the User name and Password you have set for the L2TP/IPSec VPN server on your router, and click Properties. 90 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 95
Chapter 14 VPN Server&Client 11. Switch to the Security tab, select Layer 2 Tunneling Protocol with IPsec (L2TP/ IPSec) and click Advanced settings. 12. Select Use preshared key for authentication and enter the IPSec Pre-Shared Key you have set for the L2TP/IPSec VPN server on your router. Then - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 96
(VPN Client) VPN Servers 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Client. Note: Firmware update may be required to support VPN Client. 3. Enable VPN Client, then save the settings. 4. Add VPN servers, and - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 97
Chapter 14 VPN Server&Client 3 ) Enter the VPN information provided by your VPN provider. • OpenVPN: Enter the VPN username and password if required by your VPN provider, otherwise simply leave them empty. Then import the configuration file provided by your VPN provider. • PPTP: Enter the VPN - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 98
Chapter 14 VPN Server&Client • L2TP/IPSec VPN: Enter the VPN server address (for example: 218.18.1.73), VPN username and password, and IPSec pre-shared key provided by your VPN provider. 4 ) Save the settings. 5 ) In the server list, enable the one you need. 94 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 99
Chapter 14 VPN Server&Client 5. Add and manage the devices that will use the VPN function. 1 ) In the Device List section, click Add. 2 ) Choose and add the devices that will access the VPN server you have configured. 6. Save the settings. 95 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 100
Chapter 14 VPN Server&Client Done! Now the devices you specified can access the VPN server you enabled. 96 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 101
Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the LAN Settings • Set Up Link Aggregation • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account • Create Static - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 102
it. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as the default settings. 4. Click SAVE. Note: If you have set the Port - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 103
be used for Link Aggregation. 15. 3. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 104
If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 5 ) Connect the set-top box to the specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 105
the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address client device manually. 3. Enter the IP address to reserve for the client device. 4. Click SAVE. 15. 5. Set Up a Dynamic DNS Service Account Most - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 106
: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider: TP-Link, NO-IP - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 107
6. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to: Visit - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 108
Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets 104 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 109
sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2. Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 110
maintaining your router. It contains the following sections: • Update the Firmware • Backup and Restore Configuration Settings • Change the Login Password • Password Recovery • Local Management • Remote Management • System Log • Test the Network Connectivity • Set System Time and Language • Set the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 111
can download it from the Support page for free. Note: • Back up your router's configurations before firmware update. • Do NOT turn off the router during the firmware update. 16. 1. 1. Auto Update 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 112
Firmware Update page. 16. 1. 3. Local Update 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System > Firmware Update. 4. Focus on the Local Update - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 113
update the firmware for the router, please contact our Technical Support. 16. 2. Backup and Restore Configuration Settings The configuration settings reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 114
process, do not turn off the router. • After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. • To reset the router to factory default settings: 1. Click FACTORY RESTORE to reset the router. 2. Wait a few minutes for the resetting and - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 115
case you forget it. Note: If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Advanced > TP-Link ID. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 116
LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Administration and complete the settings In Local Management section as needed. • Access - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 117
address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 16. 6. Remote Management This feature allows you to control remote devices' authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 118
checkbox of Remote Management. 2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value between 1024 and 65535. 3. Select is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. • - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 119
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value between work normally, you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 120
mailbox at a fixed time: For example, I want to check my router's working status at a fixed time every day, however, it's too troublesome to log a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 121
1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password. Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password. 3 ) Username: Enter the email address used for sending the system log. 4 ) Email - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 122
the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > you can modify the Traceroute Max TTL. It's recommended to keep the default value. 4. Click START to begin the diagnostics. The figure below indicates - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 123
displayed when you log into the router. You can change the system language as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Time & Language. • To get time from the internet: 1. Enable 24-Hour Time if you - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 124
Time field, select Get from Managing Device. 2. The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 125
Regularly The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Reboot. 3. Tick the Enable box of Reboot Schedule. 121 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 126
enable the Night Mode feature to specify a time period during which the LED is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4. Specify the LED off time, and the LED will - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 127
a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset button of the router until the Power LED blinks to restore factory default settings - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 128
4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 124 - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 129
the technical support. Note: You'll need to reconfigure the router to surf the internet once the router is reset. Q4. What should I do if I can't access the internet even though the configuration is finished? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 130
a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. • Upgrade the firmware of the router. • Check the TCP/IP settings on the particular device if all other - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 131
the router. Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 132
the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3 ) Go to Advanced > Network > every method above but still cannot access the internet, please contact the technical support. Q5. What should I do if I can't find my wireless network or - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 133
Troubleshoot and windows might be able to fix the problem TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services below: • Authenticating problem/password mismatch: 1 ) - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 134
Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. • Windows unable to connect to XXXX / Can not join this network / Taking longer - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 135
Archer AX72 Pro Component Name I.T.E. Power Supply Model NBS30D120250VU Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link not installed and used in accordance with the instructions, may cause harmful interference to radio communications. - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 136
Model Number: NBS30D120250VU Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 137
changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 138
systems (UAS) are not permitted. EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ RF Exposure Information This device meets the EU requirements (2014/ - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 139
and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca National Restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 140
Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 141
Equipment name AX5400 Multi-Gigabit Wi-Fi 6 Router Type designation (Type) Archer AX72 Pro 單元 Unit 鉛 Lead (Pb) Restricted substances and its chemical symbols 汞 Mercury (Hg) 鎘 Cadmium (Cd) 六價鉻 Hexavalent chromium (Cr+6) Polybrominated biphenyls ( - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 142
• Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do - TP-Link Archer AX72 Pro | Archer AX72 ProUS V1.6 User Guide - Page 143
Explanation DC voltage AC voltage Class II equipment Polarity of output terminals Energy efficiency Marking Indoor use only Caution Operator's manual RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product
© 2023 TP-Link
1910013307
REV1.0.0
User Guide
AX5400 Multi-Gigabit Wi-Fi 6 Router
Archer AX72 Pro