TP-Link Archer C8 Archer C8 V 2 Quick Install Guide
TP-Link Archer C8 Manual
 |
View all TP-Link Archer C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer C8 manual content summary:
- TP-Link Archer C8 | Archer C8 V 2 Quick Install Guide - Page 1
Installation Guide AC1750 Wireless Dual Band Gigabit Router 7106505606 REV2.0.0 Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, then - TP-Link Archer C8 | Archer C8 V 2 Quick Install Guide - Page 2
on the product label on the rear panel of the router to connect wirelessly. Model: Archer C8 Power: 12V 3.3A C8 Default Access: AC1750 Wireless Dual http://tplinkwifi.net Band Gigabit Router Username: admin Password: admin IC:8853A-C8 FCC ID:TE7C8 This device complies with part 15 of
-
1 -
2
 |
 |
Quick Installation Guide
AC1750 Wireless Dual Band Gigabit Router
Connect the Hardware
Turn on the modem, and
then wait about
2 minutes
for it to restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Verify that the following LEDs are
on and solid before continuing
with the configuration.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 5 and 6 to
complete the hardware connection.
Router
Modem
Power adapter
Power adapter
7106505606
REV2.0.0
Turn off the modem,
and remove the backup
battery if it has one.
2
4
Turn on the router.
5
3
6
Internet
Power
On
On
Internet
2.4G/5G
On
Note: If the 2.4G/5G LED
are off, please press
the WiFi button on the side panel for 2
seconds and check the LEDs again a few
seconds later.
1
Install the antennas.