TP-Link Archer TBE550E Archer TBE550EUN V1 Quick Installation Guide
TP-Link Archer TBE550E Manual
 |
View all TP-Link Archer TBE550E manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer TBE550E manual content summary:
- TP-Link Archer TBE550E | Archer TBE550EUN V1 Quick Installation Guide - Page 1
may differ from your actual product. Before You Start: 1. Make sure you are using Windows 11(x64) or above, and your router or access point supports the Wi-Fi 7 standard. 2. If you plan on using Bluetooth and already have connected Bluetooth devices, proceed with Step 1. Otherwise, skip to Step - TP-Link Archer TBE550E | Archer TBE550EUN V1 Quick Installation Guide - Page 2
troubleshooting. support, user guides and other information, simply scan the QR code or visit https://www.tp-link.com/support/ Safety Information · Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service
-
1 -
2
 |
 |
Note
: If the bracket is not suitable for your computer, detach it
from the adapter's board and replace it with the low-profile bracket.
c.
Locate an available
PCIE
slot ( X1, X4, X8, or X16)
and carefully insert the adapter.
Note
: If the Bluetooth USB cable is not correctly connected to the
motherboard, the Bluetooth function won’t work even after driver
installation.
d.
Locate an available
F_USB
connector and carefully
plug the Bluetooth USB cable into it.
USB
USB
1
Disable Bluetooth
a.
Right-click
My Computer
, select
Manage
, go to
Device Manager
.
b.
Expand the
Bluetooth
node to find your existing
Bluetooth device.
c.
Right-click the
existing Bluetooth device and
select
Disable
.
Note
: Make sure you have disabled all existing Bluetooth devices
(both built-in and the third party).
Bluetooth
Device Manager
Disable
Existing Bluetooth Adapter
Before You Start:
1.
Make sure you are using
Windows 11(x64) or
above,
and your router or access point
supports
the
Wi-Fi 7 standard
.
2. If you plan on using Bluetooth and already have
connected Bluetooth devices, proceed with
Step 1
. Otherwise, skip to
Step 2
.
f.
Replace the case panel, plug in the power cable,
and turn on your computer.
To continue, flip the page over.
2
Connect to a Computer
a.
Turn off your computer, unplug the power cable,
and then remove the case panel.
b.
Connect the provided Bluetooth USB cable to the
adapter.
Bluetooth USB Cable
Adapter
e
. Install the antennas on the magnetized antenna
base, then connect the base to the adapter.
Tips
:
•
To maximize performance, make sure the path between the antenna
and your router is clear.
•
DO NOT
connect one SMA male connector directly to another with
wires or other conductors to prevent short circuits or adapter
damage.
SMA Male
Connectors
7106510724
REV1.0.0
©2023 TP-Link
Images may differ from your actual product.
WLAN Bluetooth
PCI Express Adapter