TP-Link TL-SG105PP-M2 TL-SG105PP-M2UN V1.6 Installation Guide
TP-Link TL-SG105PP-M2 Manual
View all TP-Link TL-SG105PP-M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SG105PP-M2 manual content summary:
- TP-Link TL-SG105PP-M2 | TL-SG105PP-M2UN V1.6 Installation Guide - Page 1
© 2023 TP-Link 7106510264 REV1.0.0 Installation Guide 2.5G Multi-Gigabit Desktop PoE++ Switch Connection Panel Explanation Power LED Link/Act and PoE Status LEDs On: Power on Off: , but only transmit data. 2. TL-SG105PP-M2 can supply up to 60 W for each PoE port and 123 W for all PoE ports. - TP-Link TL-SG105PP-M2 | TL-SG105PP-M2UN V1.6 Installation Guide - Page 2
port numbers to ensure supplying to other ports. Take TL-SG105PP-M2 as an example. If port 1, 2 and 4 tp-link.com/support/ukca/ Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service
Installation Guide
© 2023 TP-Link
7106510264
REV1.0.0
2.5G Multi-Gigabit Desktop PoE++ Switch
Panel Explanation
Connection
Power LED
Power Adapter
Ethernet Ports (1-5)
Router
LAN Port
WAN Port
Internet
IP Camera
AP
IP Phone
PoE Ports (1-4)
PoE Devices
On:
Power on
Off:
Power off
Link/Act and PoE Status LEDs
On
:
Providing PoE power
Off
:
Not providing PoE power
On (Green):
Running at 2.5 Gbps
On (Yellow):
Running at 1000/100 Mbps
Flashing:
Transmitting or receiving data
Off:
No device connected
On
: 116 W ≤ Total power supply < 123 W
Flashing
: Total power supply ≥ 123 W
Off
: Total power supply < 116 W
PoE Max LED
Recovery Switch
On:
The switch will constantly detect
the working status of a PoE
powered device (PD). When the
switch finds that the PD works
abnormally, the switch will reboot it.
Off:
The PoE Auto Recovery function is
disabled.
Note:
1.
PoE ports can also connect to non-PoE de
vices, but only t
ransmit data.
2. TL-SG105PP-M2 can supply up to 60 W for each PoE port and 123 W for all PoE ports.