TP-Link TL-SM5110-SR TL-SM5110-SRUN V1 Installation Guide

Remove the Transceiver

Install the Transceiver

10GBase SFP+ LC Transceiver

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Insert the transceiver into the slot and firmly press it into place.

3. Remove the protective dust plug from the transceiver.

4. Plug fiber-optic cables into the transceiver. Note that the transceiver

works without any additional configuration.

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Disconnect the network fiber-optic cables from the transceiver.

4. Reinstall the protective dust plug in the transceiver’s optical bores and

place it on antistatic mat or a static shielding bag.

3. Pull the safety latch downwards to release the transceiver, and then

pull it out from the slot.

Installation Guide

Note:

1. Do not touch the output pins on the transceiver with your hand.

2. Always keep the protective dust plug on the transceiver’s optical bores until you are ready to make a connection.

Caution:

DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

For technical support and other information, please visit

, or simply scan the QR code.

If you have any suggestions or needs on the product guides,

welcome to email

.

To ask questions, find answers, and communicate with TP-Link

users or engineers, please visit

to join TP-Link Community.