TRENDnet EL-HS800 Quick Installation Guide

TRENDnet EL-HS800 Manual

TRENDnet EL-HS800 manual content summary:

  • TRENDnet EL-HS800 | Quick Installation Guide - Page 1
    Quick Installation Guide EL-HS800
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 2
    Remove the thumbscrew and protective plating from the goose neck wall mount. 3. Run all necessary cables (CAT 5 cable, Power Adapter cable, and the EL-HS800's power terminals) through the goose neck wall mount. When using a wireless camera, please run the Antenna cable also. 1 English Version 01.18
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 3
    4. Run each cable through the opening located at the top of the EL-HS800. DO NOT run all cables through the opening simultaneously. Serious blockage can occur. 5. After inserting the appropriate cables, extend each cable to 6 inches for camera
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 4
    7. Use a precision knife or a sharp object to split the wire in two halves. 8. Peel the plastic sheath to expose the copper wiring. It is recommended that you use a wire stripper to remove the plastic sheath effectively. 9. You should have two halves of exposed copper wire as shown below. 3 English
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 5
    10. Pair one half of the power cable with the red terminal of the enclosure's power supply. 11. Place the yellow wire connector over the assembly in step 10, and twist the wire connector clockwise to secure the contact between the wired pair. 12. Repeat steps 10-11 for the next pair of terminals. 13
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 6
    the protective plating into the goose neck wall mount and tighten the thumb screw. 15. Screw the goose neck wall mount on top of the EL-HS800 with an Alan wrench and three hexagon socket screws. 16. Take the circular base and connect three 2-inch Mounting screws and three nuts to create
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 7
    17. Mount the assembly in step 16 using three screws. 18. Take the assembly in step 18, and use three countersunk head screws to mount the assembly on top of the 2-inch mounting screws. 19. Take the TV-IP400/TV-IP400W and turn to the bottom of the camera. Remove the rubber molding to prepare the
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 8
    21. Take the assembly in step 21 and mount the assembly on top of the mounting screws with regular screws. 22. Place the EL-HS800's cover over the camera and rotate the cover clock-wise. 7 English
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 9
    service, for the following lengths of time from the date of purchase. EL-HS800 - 1 Years Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet specified in the manual. Warranty service may be obtained by contacting TRENDnet office within the
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 10
    NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDnet'S PRODUCTS. TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 11
    THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ADVERTENCIA En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir daños fisicos y/o daños al equipo conectado
  • TRENDnet EL-HS800 | Quick Installation Guide - Page 12
    TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

EL-HS800
Quick Installation Guide