Home » TRENDnet Manuals » Network Cards » TRENDnet TE-210T » Manual Viewer

TRENDnet TE-210T Manual

View all TRENDnet TE-210T manuals

Add to My Manuals
Save this manual to your list of manuals

TRENDnet TE-210T manual content summary:

TRENDnet TE-210T | Manual - Page 1
1
TRENDnet TE-210T | Manual - Page 2
TRENDnet TE-210T | Manual - Page 3
PREPARATION ...6 CONFIGURATION SOLUTION TABLE 6 3.THE SETUP UTILITY FOR WINDOWS-BASED 7 INSTALLING THE SETUP WIZARD ...8 USING PSADMIN...14 WIZARD ...14 MANUAL SETUP ...16 REFRESH...19 MULTIPLE PRINT QUEUES CONFIGURATION 20 UNINSTALLING THE PSADMIN ON WINDOWS PC 20 4.INTERNET PRINTER CONNECTION
TRENDnet TE-210T | Manual - Page 4
(THROUGH TCP/IP 61 UPGRADING THE PRINT SERVER FROM BROWSER 61 9. TROUBLESHOOTING ...63 GENERAL TROUBLESHOOTING OVERVIEW 63 POWER RELATED PROBLEMS...63 PRINT PORT RELATED PROBLEMS 64 WINDOWS 95/98/ME/NT/2000/XP TROUBLESHOOTING 64 MOVING THE PRINT SERVER TO A NEW SEGMENT 65 MOVING YOUR COMPUTER
TRENDnet TE-210T | Manual - Page 5
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
TRENDnet TE-210T | Manual - Page 6
by increasing network printer performance and management. Network Management The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a Netware, Windows 95/98/Me/NT/2000/XP/2003, User's Guide ˙One external AC power adapter ˙One Quick Installation
TRENDnet TE-210T | Manual - Page 7
the print server to the network and printer(s) and plug in the print server. ˙Create a configuration page from the print server. Follow these instructions to install the print server(s), please refer to any peripheral you are connecting to the print server: 1. To ensure your printer(s) work well
TRENDnet TE-210T | Manual - Page 8
, UNIX systems and Macintosh computer(Postscript). As such, there might be several ways to deploy the print server on your network. Supported Networks Print server supports a variety of network protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. In addition, we provide software for network
TRENDnet TE-210T | Manual - Page 9
NetWare 3.12, 4.x, 5.x HP Web JetAdmin Windows Remote Print server solution for continual management of NT/2000/XP/2003 management of multiple printers- anywhere on your LAN NetWare 3.12, print server, 4.x, 5.x include alert and consumables Internet Printing Protocol Windows 98 SE
TRENDnet TE-210T | Manual - Page 10
The PSAdmin is a proprietary Windows based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be run from any Windows PC. Installing the Setup Wizard To install Wizard, please follow the directions listed below. 1. Insert the
TRENDnet TE-210T | Manual - Page 11
4. After installation completes, the Setup Wizard message appears. Click on "Network Print Server Setup Wizard" to configure Print Server settings and add Printer to the PC. 5. Click Network Print Server Setup Wizard and the following message appear. 9
TRENDnet TE-210T | Manual - Page 12
6. Click NEXT; the wizard will automatically discover the print server. 7. Select YES if you want to change the configuration and press NEXT to continue. 10
TRENDnet TE-210T | Manual - Page 13
8. Configure TCP/IP settings. If you have a DHCP server on the network, select "Obtain an IP address automatically", or click "Specify and IP address" and input the IP, Mask, and Gateway IP addresses. Click "Next". 9. TCP/IP settings are saved, click Next to start install the printer for your PC. 11
TRENDnet TE-210T | Manual - Page 14
also add a new printer in this step. If the printer is not listed under Printer Name, click on Add New Printer and follow the below instruction. After new printer is added the printer will be listed under the Print Name section, select the printer and click NEXT. 12
TRENDnet TE-210T | Manual - Page 15
11. Click Next and setup program will display the summary of your printer's configuration. 12. Now, your print server has been successfully connected with your printer. 13
TRENDnet TE-210T | Manual - Page 16
Using PSAdmin After PSAdmin is successfully installed, run the program by double-clicking the PSAdmin icon from "Network Print Server" program. The screen will then appear as follow picture. All print server(s) feature Novell NetWare function on the LAN will be displayed along with their respective
TRENDnet TE-210T | Manual - Page 17
allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an IP address to the device, please skip to the following step. 3 In the IP Address option, type an IP address for the print
TRENDnet TE-210T | Manual - Page 18
Setup follow the steps: 1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and create the necessary parameters (Refer to your Novell NetWare print server/Services manual for details). 2. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. From your Windows 95/98/Me, run PSAdmin
TRENDnet TE-210T | Manual - Page 19
OK. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. Properties -TCP/IP Options The TCP/IP options allow you to modify the print server's TCP/IP settings. Each option is
TRENDnet TE-210T | Manual - Page 20
, the following IP address, Subnet Mask, Gateway will be grayed out and are not available for editing. 2.While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. Specify an IP address: IP Address: This option shows the print server
TRENDnet TE-210T | Manual - Page 21
Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrade button just like a picture ＜＞, as shown as follow picture 2. Select General Upgrade. Make sure that the upgrade file is located in the same
TRENDnet TE-210T | Manual - Page 22
Configuration To configure the print server to service multiple print queues, please follow the instructions listed below: 1. Log into your the PSAdmin. Done. Note: Please refer to NetWare's Print server/Services manuals for detailed PCONSOLE commands. Uninstalling the PSAdmin on Windows PC To
TRENDnet TE-210T | Manual - Page 23
1. Click Start, point to Settings, and select Control Panel. 2. Double click the Add/Remove Programs icon. 3. Click Change or Remove Programs tab. 4. Select Network Print Monitor for Windows 95/98/NT/2000/XP and click Change/Remove button. 5. The un-installation wizard program will be launched. 6.
TRENDnet TE-210T | Manual - Page 24
2000/XP/2003 For Windows NT/2000/XP/2003, you can use a supported Web Browser, for example, Netscape or IE to view the embedded web the print server's web page. For example, to install Windows 2000 by IPP service you must follow below information: 1.Click Start button. 2.Select Settings, and then
TRENDnet TE-210T | Manual - Page 25
6.In URL's box, input print server's IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp1. ** Three ports should be the port name as lp1, lp2, and lp3. 7.It will check print server to connect to HP printer, if not, it will appear as follow
TRENDnet TE-210T | Manual - Page 26
System Requirements HP Web JetAdmin software runs on Microsoft Windows NT, HP-UX, Solaris, Red Hat Linux and SuSE Linux system. For information on supported operating systems and browser versions, we recommend IE or Netscape version 4 or higher. Please access HP Customer Care Online at http://www.hp
TRENDnet TE-210T | Manual - Page 27
domain:port/ Configuring and Modifying a Device Using your browser, navigate to HP Web JetAdmin's URL. For example: http://server.domain:port/ Follow the instructions on the appropriate home page to configure or modify your printer. Note: You can also substitute the server domain with TCP/IP address
TRENDnet TE-210T | Manual - Page 28
5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for example, IE 4.0, Netscape 4.0 or above is recommended. The embedded web server provides access to configuration and management pages
TRENDnet TE-210T | Manual - Page 29
Device Name: This option allows you to view device name of the print server. To correct the print server's device name. System Contact: This option allows you to view contact name of the print server. To check the print server's contact name who in charge of this device. System Location: This option
TRENDnet TE-210T | Manual - Page 30
you to view model of the printer. When the printer connected with the print server, it will be show in the model box. Printing Language Supported: This option allows you to view command to set the printer. When the printer connected with the print server, it will be show in the
TRENDnet TE-210T | Manual - Page 31
Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server. The
TRENDnet TE-210T | Manual - Page 32
General Settings: Print Server Name: This option allows you to view print server's name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time. NetWare NDS Setting: Use NDS Mode:
TRENDnet TE-210T | Manual - Page 33
1.Click Status, it then appears the sub-menu. 2.Click AppleTalk, it then as shown in the following picture. Zone Name: If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. Port Name:
TRENDnet TE-210T | Manual - Page 34
SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server. Setup Menu Meanwhile, you have
TRENDnet TE-210T | Manual - Page 35
Device Name: This option allows you to input device name of the print server. To correct the print server's device name. System Contact: This option allows you to input contact name of the print server. To check the print server's contact name who in charge of this device. System Location: This
TRENDnet TE-210T | Manual - Page 36
˙Password: The default password is empty. After setup password is completed from the print server, you should to remember this password to input password box. Printer Setup 1. Click Setup, it then appears the sub-menu. 2. Click Printer, it then as shown in the following picture. Bi-directional: This
TRENDnet TE-210T | Manual - Page 37
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to input IP address from the print server. The
TRENDnet TE-210T | Manual - Page 38
which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues. Logon Password: This option allows you to input encrypted password from the print server. The print server login to NetWare
TRENDnet TE-210T | Manual - Page 39
, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the print server. Note: Please refer to NetWare's Print Server/Services manuals for detailed PCONSOLE commands. AppleTalk Setup The print server can print jobs submitted from Macintosh
TRENDnet TE-210T | Manual - Page 40
1.Click Setup, it appears the sub-menu. 2.Click AppleTalk, it as shown in the following picture. 3.Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave it in default (This enables the print server automatically search and link itself to the
TRENDnet TE-210T | Manual - Page 41
with this installation. Please see the previous section in this chapter for details. 2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript. 5. Click Setup... button and choose the PPD file matching your printer, and click OK. If your printer does not appear in the PPD
TRENDnet TE-210T | Manual - Page 42
authentication purpose. The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. When an unusual condition or
TRENDnet TE-210T | Manual - Page 43
names. The default community name is public (case-sensitive), with Read Only access right in default. Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the
TRENDnet TE-210T | Manual - Page 44
6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under MS-Windows. Please make sure that the following steps have been completed before proceeding with installation under
TRENDnet TE-210T | Manual - Page 45
and click Add. 5. Select Microsoft from the Manufacturers list. 6. Select IPX/SPX-compatible Protocol from the Network Protocols list and follow the instructions on the screen. 7. Restart the computer. 8. Done. NetBEUI Protocol Installation 1. Click Start, point to Settings, and select Control Panel
TRENDnet TE-210T | Manual - Page 46
computer for new settings to take effect. 8. Done. Note: For more detailed information, please refer to your Microsoft Windows 9X/ME/NT/2000/XP manuals. Windows 95/98/Me/NT/2000/XP Installation Procedure Please perform the steps as follows to ensure a smooth installation: 1. Run Setup from the print
TRENDnet TE-210T | Manual - Page 47
15. Select the Network Print Port and click OK. 16. The Add Port box will then appear, along with the print server's Node ID (The last 6 digits of the Node ID, located on the back of the print server unit). Select one printer server port from the list, which is now connected to (one of) your printer
TRENDnet TE-210T | Manual - Page 48
It starts again to search for the print server on the network by using the protocol you specify in the step above. When finished, the print server will be displayed along with the its Node ID, as shown in the following picture. (The last 6 digits of the Node ID, located on the back of the print
TRENDnet TE-210T | Manual - Page 49
the print server to obtain an IP address and related TCP/IP settings automatically from a DHCP server. While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. By default, the print server's DHCP function is disabled. Windows NT LPR
TRENDnet TE-210T | Manual - Page 50
5. From the Printer Ports box as shown in the following picture, select the LPR Port. 6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the IP address assigned to the print server in the Name or address of server providing lpd box. 7. In the Name of
TRENDnet TE-210T | Manual - Page 51
Windows 2000/XP Standard TCP/IP Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer, Click Next. 3. The Add Printer Wizard screen will appear, Select Local Printer and click Next. 4. From the type of Create a new port box as shown in the following
TRENDnet TE-210T | Manual - Page 52
6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next. 7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1 for
TRENDnet TE-210T | Manual - Page 53
10. Select the appropriate printer manufacturer and printer type list and click Next. 11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, "To confirm that the printer is installed properly, you can print a test page". Select Yes (Recommended) and
TRENDnet TE-210T | Manual - Page 54
detailed installation procedures below. If you can't find the installation procedure corresponding to your UNIX system, please refer to your UNIX manuals for details about configuring your UNIX for the "remote printing system". SCO UNIX (OpenServer 5.0.x) 1. Login root 2. Type "arp -s
TRENDnet TE-210T | Manual - Page 55
b. Do you wish to change the printer description file /etc/printcap (y/n) [n y c. Enter information for remote printers or local printers accepting remote printing requests Please enter the printer name (q to quit): --->printer-1 You can enter a printer name you like in this option. d. Is xxxx a
TRENDnet TE-210T | Manual - Page 56
Print Server's host name and its associated IP address. Note: Before this step, please make sure you have follow the directions on page 80 to manually assign an IP address to the Print Server. 3. Under the prompt sign, type smit and press Enter. 4. Select Device. 5. Select Printer/Plotter. 6. Select
TRENDnet TE-210T | Manual - Page 57
Linux-based systems, including Slackware, RedHat, etc, without any problems. Basically, the Linux's printing system is based on BSD system TCP/IP is well configured on your RedHat system, including network interface card's driver and IP-related settings say, IP address, subnet mask, and gateway IP
TRENDnet TE-210T | Manual - Page 58
f. Click New button. g. Click Forward button. 56
TRENDnet TE-210T | Manual - Page 59
h. In the Name field, type a user-defined name, click Forward. i. In the Queue Type field, choose Networked UNIX. j. In the Server field, type the IP of print server k. In the Queue field, type a print server's port name, which connect to the printer. For example: lp1. l. Click Forward button. 57
TRENDnet TE-210T | Manual - Page 60
m. In the Printer field, choose Postscript Printer. n. Choose the model of printer and click Forward. o. Done. 58
TRENDnet TE-210T | Manual - Page 61
UnixWare 7 1. Login root. 2. Run CDE (Common Desktop Environment). 3. Open the subpanel under the SCO icon in the Front Panel. 4. Select SCO Admin. 5. Select Print Setup Manager from System Administration window. 6. Click LPD icon in the tool bar of Print Setup window. 7. In Name field, type a name
TRENDnet TE-210T | Manual - Page 62
8. Upgrading Print Server Overview Upgrading print server will allow you to replace its firmware inside the print server while the newer software version of the print server is available from your local dealer. Depending on the different systems users might use, this chapter is divided into several
TRENDnet TE-210T | Manual - Page 63
5. Done! Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type "tftp
TRENDnet TE-210T | Manual - Page 64
4. Click Upgrade form Browser and select the firmware file. 5. Click Upgrade. 6. Done. 62
TRENDnet TE-210T | Manual - Page 65
9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support. LED Light Indicators The print server
TRENDnet TE-210T | Manual - Page 66
Problems replacement connector. Windows 95/98/Me/NT/2000/XP Troubleshooting Multi-Segment LAN Environment Installation (through the Network Print the Network icon. 5. Select Services. 6. Select Add. 7. In the Select Network Service box, select the RIP for Manual Frame Type Detection. 7. Click Add. 64
TRENDnet TE-210T | Manual - Page 67
be reconfigured on the original Windows NT server or on each Windows 95/98 computer using this print server in order for the print server's driver on each computer to re-establish a new connection. Print Server Reconfiguration Procedure on Windows 95/98/Me 1. Click Start on the bottom left hand
TRENDnet TE-210T | Manual - Page 68
to a new segment. Please refer to the "Moving the print server to a new segment" section for more detailed reconfiguration instructions. Novell NetWare Troubleshooting Many printing problems can be traced back to incorrect or incomplete print server installations. It is always wise to check the
TRENDnet TE-210T | Manual - Page 69
and your Windows NT server is on the other segment. (This troubleshooting guide will also apply to a multiple-segmented network while installing the print about Manual Setup, please refer to Chapter 3). 2. If the solution described above is not applicable, you have to follow the instructions below
TRENDnet TE-210T | Manual - Page 70
3. On your NT server, type, for example, "arp -s 192.72.214.68 00-40-01-3F-02-AB". Please note, in this arp command you have to type 192.72.214.68 on purpose. Do not type this IP address as 192.72.214.100. 4. Type "tftp 192.722.214.68 get config.txt". The configuration file will then be retrieved
TRENDnet TE-210T | Manual - Page 71
Appendix: Load Default Value You can load the default value of print server by press the reset button. Please press 5 to 10 seconds until the status LED flash and the default value is restored. Or, you can load the default setting from the WEB management as following: 69
TRENDnet TE-210T | Manual - Page 72
. If these printer drivers are not available to you, please contact your printer manufacturer. Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the print server. Possible Explanation There might be a network problem. This causes the upgrading
TRENDnet TE-210T | Manual - Page 73
Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports "Create Print server Error", "Create
TRENDnet TE-210T | Manual - Page 74
Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX KX-P6300 GDI", or "Panasonic KX-P6500 GDI" to the print server. Technical Support You can find the most recent software and user documentation on the TRENDware website. TRENDware provides free technical

Match case Limit results 1 per page