TRENDnet TEW-659BRV Quick Installation Guide
TRENDnet TEW-659BRV Manual
View all TRENDnet TEW-659BRV manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TEW-659BRV manual content summary:
- TRENDnet TEW-659BRV | Quick Installation Guide - Page 1
300Mbps Wireless N VPN Router TEW-659BRV ŸQuick Installation Guide (1) ŸTroubleshooting (7) 1.01 - TRENDnet TEW-659BRV | Quick Installation Guide - Page 2
TEW-659BRV ŸCD-ROM (User's Guide) ŸMulti-Language Quick Installation Guide ŸNetwork Cable (1.5m / 5ft) ŸPower Adapter (12V DC, 1A) If any of the above contents are missing, please contact your reseller. Minimum Requirements ŸA computer with a wired or wireless your Internet Service Provider (ISP - TRENDnet TEW-659BRV | Quick Installation Guide - Page 3
cable to the TEW-659BRV's WAN port. Connect the other end of the cable to your modem's network port. 8. Verify that the following panel lights are on: LAN (port (1, 2, 3, 4) your computer is connected to) (Green), WAN (Green) and Wireless (Green). Please see troubleshooting section for additional - TRENDnet TEW-659BRV | Quick Installation Guide - Page 4
the Wireless Router from a wired computer. 2. For VPN configuration instructions please refer to the User's Guide. The User's Guide is located on the provided CD-ROM. 1. Open your web browser, type http://192.168.10.1 in the Address Bar, and then press Enter. 5. Enter the Old password (By default - TRENDnet TEW-659BRV | Quick Installation Guide - Page 5
name of your wireless network (e.g. wireless router or access point). Enter a unique SSID. Choose something that you would easily identify when searching for available wireless networks. 8. Configure the settings based on information provided by your ISP. Follow the wizard instructions to complete - TRENDnet TEW-659BRV | Quick Installation Guide - Page 6
8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Preshare key. You will need the Preshare key when you configure your wireless adapter(s). 12. Please wait while the TEW-659BRV reboots and saves the changes. 13. Click Finish. 11. Click Apply Settings. 5 - TRENDnet TEW-659BRV | Quick Installation Guide - Page 7
Open up your browser and enter in a URL (e.g. http://www.trendnet.com) to verify that you have Internet connection. Your configuration is now complete For detailed information regarding the TEW-659BRV's configuration and advanced settings, please refer to the User's Guide included on the CD-ROM, or - TRENDnet TEW-659BRV | Quick Installation Guide - Page 8
Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says "The page cannot be displayed." How can I get into the TEW-659BRV's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2. 2. Make sure - TRENDnet TEW-659BRV | Quick Installation Guide - Page 9
do I find out? Contact your Internet Service Provider's (ISP) support service for the correct information. 3. I went router. The default system password is admin. Click Configuration, Basic Setting and then Wireless. Make sure Enabled is selected and then click Save. 3. Power cycle the TEW-659BRV - TRENDnet TEW-659BRV | Quick Installation Guide - Page 10
Green Solid/Off Reset/WPS Button N/A N/A Device is not ready Reset: Hold 20 seconds to reset device to factory defaults. WPS: Hold 3 seconds to activate WPS. If you still encounter problems or have any questions regarding the TEW-659BRV, please contact TRENDnet's Technical Support Department. 9 - TRENDnet TEW-659BRV | Quick Installation Guide - Page 11
- TRENDnet TEW-659BRV | Quick Installation Guide - Page 12
- TRENDnet TEW-659BRV | Quick Installation Guide - Page 13
- TRENDnet TEW-659BRV | Quick Installation Guide - Page 14
TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright ©2011. All Rights Reserved. TRENDnet.
300Mbps Wireless N VPN Router
TEW-659BRV
1.01
Ÿ
Quick Installation Guide (1)
Ÿ
Troubleshooting (7)