TRENDnet TPE-S80 Datasheet

The 8-Port 10/100Mbps PoE Switch, model TPE-S80, reduces equipment

and installation costs by delivering data and power over existing Ethernet

cables to Power over Ethernet (PoE) enabled devices such as Access

Points and IP Cameras.

Boost office efficiency and reduce network congestion with a total

switching capacity of 1.6Gbps. LED indicators display device status for

easy power management and troubleshooting. An internal power supply

reduces clutter and delivers 15.4 Watts to each PoE port. A convenient

on/off button is located on the back of the switch. Non-PoE devices can

connect to the switch—auto-sensing PoE technology cuts power to non-

PoE connected devices. Use TRENDnet's PoE Splitter with the TPE-S80

to install non-PoE devices in remote locations.

TPE-S80 (V1.0R)

TPE-S80

rev: 04.27.2010

• IEEE 802.3af Power over Ethernet (PoE) compliant

• 8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports

• On/Off power switch

• Provides 15.4 watts per PoE port

• Supports PoE Powered Device (PD) classification

• 1.6Gbps switching fabric

• Full wire-speed non-blocking reception and transmission

• Store-and-forward switching method

• Back pressure Flow Control for half-duplex mode

• IEEE 802.3x Flow Control for full-duplex mode

• 512Kbits RAM Data Buffer and 1K MAC address entries

• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)

• Plug and Play

• Sturdy metal enclosure

• Mounting hardware included

• 5-year limited warranty

network

accessories