TRENDnet TV-H100 Quick Installation Guide
TRENDnet TV-H100 Manual
 |
UPC - 710931303438
View all TRENDnet TV-H100 manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV-H100 manual content summary:
- TRENDnet TV-H100 | Quick Installation Guide - Page 1
Quick Installation Guide TV-H100 H/W: V1 - TRENDnet TV-H100 | Quick Installation Guide - Page 2
Table of Contents English ...1 1. Before You Start 1 2. Hardware Installation 2 Troubleshooting 11 Version 02.17.2009 - TRENDnet TV-H100 | Quick Installation Guide - Page 3
1. Before you start Package Contents ? TV-H100 ? Quick Installation Guide ? Mounting Bracket ? Hexagon screwdriver (1/4" L=6mm) ? Screws, washers and wall mount screws Installation Requirements The following items below are not included. Users must provide the items themselves. Make sure to have - TRENDnet TV-H100 | Quick Installation Guide - Page 4
Server to match your network before installing the device. 1. Remove the screws from the back of the camera enclosure. Save these screws. You will need to use these screws later. 2. Slide out the back end of the enclosure. 3. Unscrew the metal bracket from the TV-H100. Save this screw and washer - TRENDnet TV-H100 | Quick Installation Guide - Page 5
4. Use the following screw to mount the Internet Camera Server to the metal bracket. 5. Screw the metal bracket back in to the TV-H100. 6. Connect the IR shelter to the Internet Camera Server (TV-IP312 and TV-IP312W only). 7. Take the Internet Camera Server's power adapter and cut about 4 inches - TRENDnet TV-H100 | Quick Installation Guide - Page 6
the power adapter and RJ-45 Ethernet cable from the base to the top of the mounting arm. Make sure to leave one end of the RJ-45 Ethernet cable unterminated. 11. Remove one of the caps from the enclosure. 12. Insert the unterminated end of the cable through the cap. 4 English - TRENDnet TV-H100 | Quick Installation Guide - Page 7
cable. 14. Insert the Ethernet cable through the cable access hole. Then screw in the cap securely. 15. Remove one of the caps from the enclosure. 16. Insert the power adapter through the cap. 17. Insert the power adapter through the cable access hole. Then screw in the cap securely. 5 English - TRENDnet TV-H100 | Quick Installation Guide - Page 8
. Use electrical tape to seal the cables back together. Make sure to seal the individual strands separately. 20. Connect the Ethernet cable to the Internet Camera Server. 21. Connect the power adapter to the Internet Camera Server. 22. Slide the back end of the enclosure back in. 6 English - TRENDnet TV-H100 | Quick Installation Guide - Page 9
Installing External Antenna to Wireless Internet Camera 1. Remove the antenna from the back of your wireless Internet Camera Server. 2. Run the pigtail cable that comes with the TEW-ASAK from the base to the top of the mounting arm. 3. Remove one of the caps from the enclosure. 4. Insert the pigtail - TRENDnet TV-H100 | Quick Installation Guide - Page 10
access hole. Then screw in the cap securely. 6. Connect the pigtail cable that comes with the TEW-ASAK and the power adapter to the Internet Camera Server. 7. Slide the back end of the enclosure back in. 8. Follow the directions in the QIG for the TEW-ASAK to connect the surge arrestor to your - TRENDnet TV-H100 | Quick Installation Guide - Page 11
Mounting the Camera Housing 1. Place the mounting bracket against the wall and mark each of the four holes with a pencil. 2. white screws. 3. Insert the screws into the holes. 4. Use the bracket screws to mount the mounting bracket to the TV-H100. Use the provided Hex screwdriver to secure the - TRENDnet TV-H100 | Quick Installation Guide - Page 12
installation is now complete. For detailed information regarding the TV-H100 configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CDROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service - TRENDnet TV-H100 | Quick Installation Guide - Page 13
should I do? A3: You must use the TEW-ASAK with the TEW-L406/L412. See Installing External Antenna to Wireless Internet Camera in section 2 for more instructions. If you still encounter problems or have any questions regarding the TV-H100, please contact TRENDnet's Technical Support Department. 11 - TRENDnet TV-H100 | Quick Installation Guide - Page 14
Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ADVERTENCIA En todos nuestros equipos se mencionan claramente - TRENDnet TV-H100 | Quick Installation Guide - Page 15
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet's website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2009. All Rights Reserved. TRENDnet.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
TV-H100
H/W: V1
Quick Installation Guide