TRENDnet TV-H400 Quick Installation Guide
TRENDnet TV-H400 Manual
 |
UPC - 710931303469
View all TRENDnet TV-H400 manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV-H400 manual content summary:
- TRENDnet TV-H400 | Quick Installation Guide - Page 1
Quick Installation Guide TV-H400 H/W: V1.0R - TRENDnet TV-H400 | Quick Installation Guide - Page 2
Table of Contents English ...1 1. Before You Start 1 2. Hardware Installation 2 Troubleshooting 9 Version 07.10.2008 - TRENDnet TV-H400 | Quick Installation Guide - Page 3
1. Before you start Package Contents ? TV-H400 ? Quick Installation Guide ? Power Adapter (12V DC, 0.6A) ? 1 x Ceiling Mounting Bracket ? Hexagon screwdriver (1/4" L=6mm) ? Screws and washers ? Rubber seal Installation Requirements The following items below are not included. Users must provide the - TRENDnet TV-H400 | Quick Installation Guide - Page 4
1. Rotate the TV-H400's cover counter clockwise and remove the cover. 2. Unscrew the thumbscrew to remove the protective plate from the wall mount. Save this screw. You will need to use this screw later. 3. Run all necessary cables (CAT 5 cable, power adapter cable, and the power terminals) through - TRENDnet TV-H400 | Quick Installation Guide - Page 5
TV-H400. DO NOT run all cables through the opening simultaneously. Serious blockage can occur. 5. After inserting the appropriate cables, extend each cable to 6 inches for camera installation. 6. Use the provided rubber seal to seal the housing. 7. Slide the protective plating into the wall mount - TRENDnet TV-H400 | Quick Installation Guide - Page 6
8. Screw the ceiling or wall mount on top of the TV-H400 with the provided Allen wrench and three hexagon socket screws. The screws are in the plastic bag labeled Q2 or Q2B. 9. Combine the 5cm Hex - TRENDnet TV-H400 | Quick Installation Guide - Page 7
assembly in step 10 to the camera enclosure using the three flat head screws. These screws are in the plastic bag labeled Q1. 12. Mount this bracket on top of the three Hex screws, Then using the three round head screws to secure the bracket. These screws are in the - TRENDnet TV-H400 | Quick Installation Guide - Page 8
for the camera with 3 small screws. These screws should come with the Internet Camera Server. 15. Take the assembly in step 14 and mount the assembly on top of the mounting bracket with two round head screws. These screws are in the plastic bag labeled Q6. 16. Connect the Ethernet cable and - TRENDnet TV-H400 | Quick Installation Guide - Page 9
enclosure into an available power outlet. Your installation is now complete. For detailed information regarding the TV-H400 configuration and advanced settings, please visit TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support - TRENDnet TV-H400 | Quick Installation Guide - Page 10
the Camera Enclosure Note: Mounting screws and screw anchors are not included. 1. Place the mounting bracket against the wall or ceiling and mark each of the four holes with a pencil. 2. Drill holes for the screws at each marked position. 3. Insert - TRENDnet TV-H400 | Quick Installation Guide - Page 11
Troubleshooting Q1: After I put my Internet Camera Server in the enclosure, the image is distorted. What should I do? A1: First, make sure that you have adjusted the focus on your camera. Second, mount the TV-H400 so that it's not in direct view of the sun. If you still encounter problems or have - TRENDnet TV-H400 | Quick Installation Guide - Page 12
exist. Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ADVERTENCIA En - TRENDnet TV-H400 | Quick Installation Guide - Page 13
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet's website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2008. All Rights Reserved. TRENDnet.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
TV-H400
H/W: V1.0R
Quick Installation Guide