TRENDnet TV-IP100W Quick Installation Guide
TRENDnet TV-IP100W Manual
 |
UPC - 025215188022
View all TRENDnet TV-IP100W manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV-IP100W manual content summary:
- TRENDnet TV-IP100W | Quick Installation Guide - Page 1
TV-IP100W Wireless Internet Camera Server Quick Installation Guide Guide d'installation rapide pour Caméra Internet Serveur Sans Fil Anleitung zur Schnellinstallation der Wireless Internet Kamera Server Guía de Instalación Rápida para Servidor de Cámara Inalámbrico de Internet Version 07.08.2005 - TRENDnet TV-IP100W | Quick Installation Guide - Page 2
Table of Contents English ...1 1. Prepare for Installation 1 2. Install Hardware 2 3. Configure the Internet Camera 3 4. Using the Internet Camera Wirelessly 5 Troubleshooting 7 - TRENDnet TV-IP100W | Quick Installation Guide - Page 3
TV-IP100W. This Internet Camera will allow you to view live images from internal and external networks. This guide will help you set up and configure your Internet Camera. Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting - TRENDnet TV-IP100W | Quick Installation Guide - Page 4
-45 network cable to the Internet Camera then connect the other end of the network cable to a switch or hub. 3. Connect the power adapter to the Internet Camera. Make sure to use the power adapter supplied with the Internet Camera. Note: Using a different power adapter may damage the unit. TV-IP100W - TRENDnet TV-IP100W | Quick Installation Guide - Page 5
3. Configure the Internet Camera 1. Open Internet Browser Window and enter (camera's default IP address). Click System Administration. Note: The PC's IP (Example 192.168.0.50) address must correspond with the Internet Camera's IP address (Default IP: 192.168.0.20) in the same - TRENDnet TV-IP100W | Quick Installation Guide - Page 6
Click Network. Enter an IP address, Subnet mask, and Default gateway for your camera and click the Save button to keep the changes. Now your camera is ready to use. Note: If you need to access the configuration remotely, it is recommended to enter a static IP address and the Internet DNS IP address - TRENDnet TV-IP100W | Quick Installation Guide - Page 7
4. Using the Internet Camera Wirelessly 1. Click Wireless. 2. Type in the same SSID of your wireless Access Point or Router into the SSID field. Set Wireless Mode to Infrastructure and make sure that the channel is the same as your wireless Access Point or Router. If your wireless Access Point or - TRENDnet TV-IP100W | Quick Installation Guide - Page 8
for the TV-IP100W and the wireless Access Point to communicate wirelessly. Then type the IP Address that you assigned to the TV-IP100W in your web browser for verification. For detailed information about each feature, please refer to the User's Guide on the CD-ROM or contact our support. 6 English - TRENDnet TV-IP100W | Quick Installation Guide - Page 9
A2. No. It cannot be replaced. Q3. How do I view the Internet Camera's live images within my Local Network? A3. Open a web browser (Internet Explorer or Netscape), type your Wireless Internet Camera's IP address (i.e.: 192.168.0.20) in the Address bar, and then hit the Enter key. The Welcome page of - TRENDnet TV-IP100W | Quick Installation Guide - Page 10
2. Click on Custom Level and make sure all ActiveX controls are set to "Enable" and click OK. 3. Once you save the settings, the browser will load again and the image should appear. 8 - TRENDnet TV-IP100W | Quick Installation Guide - Page 11
Connection Properties Window will appear - Under General tab, select Internet Protocol (TCP/IP) > click on Properties button, Internet Protocol (TCP/IP) Properties Window will appear 1. Select Use the following IP address option and enter the IP, Subnet Mask and Default gateway addresses. 2. Click - TRENDnet TV-IP100W | Quick Installation Guide - Page 12
button, TCP/IP Protocol Properties Window will appear 1. Select Specify an IP address option and enter the IP, Subnet Mask addresses. For detailed information about the TV-IP100W's configuration and advanced settings, please refer to the User's Guide on the included CD-ROM or to www.TRENDnet.com - TRENDnet TV-IP100W | Quick Installation Guide - Page 13
, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware's website at http://www.TRENDNET.com TRENDnet Technical Support US/Canada Support Center European Support Center Contact Telephone: 1(310) 626-6252 Fax: 1(310
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
