TRENDnet TV-IP121W User's Guide

TRENDnet TV-IP121W Manual

Get TRENDnet TV-IP121W PDF manuals and user guides
UPC - 710931303667
View all TRENDnet TV-IP121W manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet TV-IP121W manual content summary:

  • TRENDnet TV-IP121W | User's Guide - Page 1
  • TRENDnet TV-IP121W | User's Guide - Page 2
    Preface Thank you for purchasing the TV-IP121W, a powerful and highquality image SecurView Wireless Day/Night Internet Camera. The infrared LEDs and light sensor enable the camera to capture images even in dark environments. The camera can be installed as a standalone system within your application
  • TRENDnet TV-IP121W | User's Guide - Page 3
    13 3.2 ACCESSING TO THE CAMERA 18 3.3 CONFIGURING THE IP ADDRESS OF THE PC 21 CHAPTER 4 22 CONFIGURING THE CAMERA 22 4.1 USING THE WEB CONFIGURATION 22 4.2 USING SMART WIZARD 23 4.3 BASIC SETUP 27 4.4 NETWORK SETTINGS 32 4.5 SETTING UP VIDEO & AUDIO 39 4.6 EVENT SERVER CONFIGURATION
  • TRENDnet TV-IP121W | User's Guide - Page 4
    4.10 INFORMATION 53 CHAPTER 5 55 APPENDIX 82 A.1 SPECIFICATION 82 A.2 GLOSSARY OF TERMS 84 LIMITED WARRANTY 93 - 3 -
  • TRENDnet TV-IP121W | User's Guide - Page 5
    contained in the package carefully. You should have the following:  TV-IP121W  AC Power Adapter (5VDC, 2.5A)  Detachable External Antenna  Camera Stand  Ethernet Cable (RJ-45 type)  Utility CD-ROM  Multi-Language Quick Installation Guide NOTE If there is any item damaged or missing, please
  • TRENDnet TV-IP121W | User's Guide - Page 6
    is powered on with the steady amber light. Infrared LEDs (optional) allows your camera to capture clear images in a dark environment Lens Assembly Link LED indicates the camera's network connectivity with the flashing green light. Light Sensor (optional) is used to trigger on and off the infrared
  • TRENDnet TV-IP121W | User's Guide - Page 7
    when it is pressed quickly; when it is long pressed for five seconds, the camera will resume the factory default settings. Rear View Ethernet Cable Connector is used to connect the network cable, which supports the NWay protocol so that the camera can detect the network speed automatically. - 6 -
  • TRENDnet TV-IP121W | User's Guide - Page 8
    stand. - Power Connector: Connects the AC power adapter to supply power to the camera. - LAN Port: It is used to connect the network RJ-45 cable, which supports the NWay protocol so that the camera can detect the network speed automatically. - Reset Button: Rest will be initiated when the reset
  • TRENDnet TV-IP121W | User's Guide - Page 9
    Remote Control Supported By using a standard Web browser or the bundled SecurView™ software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also
  • TRENDnet TV-IP121W | User's Guide - Page 10
    III 350MHz or above RAM: 128MB Resolution: 800x600 or above User Interface: Microsoft® Internet Explorer 6.0 or above  Accessing the Camera using Ultra View Platform: Microsoft® Windows® 2000/XP/Vista/Windows 7 Hardware Requirement: 1 camera connected: Intel Pentium III 800MHz; 512MB RAM
  • TRENDnet TV-IP121W | User's Guide - Page 11
    CHAPTER 2 HARDWARE INSTALLATION 2.1 Installing the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera's screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes
  • TRENDnet TV-IP121W | User's Guide - Page 12
    , you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with "default" SSID. NOTE If the camera cannot to your wireless network, you need to install the camera in LAN and proceed with WLAN settings. - 11 -
  • TRENDnet TV-IP121W | User's Guide - Page 13
    and remote places and objects via Internet or Intranet.  Capture still images and video clips remotely.  Upload images or send email messages with the still images attached. The following diagram explains one of the typical applications for your camera and provides a basic example for installing
  • TRENDnet TV-IP121W | User's Guide - Page 14
    comes with a convenient utility, IPSetup, which is included in the Installation CD-ROM, allowing you to search the camera on your network easily. 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the Auto-Run program. 2. Click the IPSetup from
  • TRENDnet TV-IP121W | User's Guide - Page 15
    3. Click Browse to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\IPSetup. Then click Next. - 14 -
  • TRENDnet TV-IP121W | User's Guide - Page 16
    4. Click Next to confirm the IPSetup software to be installed to the computer. 5. When the Installation Complete window appears, click Close. - 15 -
  • TRENDnet TV-IP121W | User's Guide - Page 17
    , the application is automatically installed to your computer, and creates a folder in Start\Program\TRENDnet\IPSetup. 7. Click Start>Programs>TRENDnet>IPSetup, and then click IPSetup. 8. The IPSetup window will appear. It will search for the camera within the same network Camera Display Area - 16 -
  • TRENDnet TV-IP121W | User's Guide - Page 18
    will link to the Camera's Web Configuration page. - Change IP: Click this button to bring up the following window. It allows you to change the IP Address. You can select either Static IP or click DHCP. Then, enter the Administrator ID & Password. By default the ID/Password is: admin. When complete
  • TRENDnet TV-IP121W | User's Guide - Page 19
    example showed in the User's Guide is based on the Internet Explorer). 2. Type the default IP address (192.168.10.30) or the IP address found by IPSetup in the Address bar, and then press [Enter]. 3. When the login window appears, enter the default User name (admin) and Password (admin) and press OK
  • TRENDnet TV-IP121W | User's Guide - Page 20
    depends on the Internet security settings of your computer. Click Yes to proceed. After you login into the Web Configuration of the camera, the main page will appear as below: Zoom In Buttons Live View/Setup Camera Information Nightmode Button Function Buttons Live View Image The main page of
  • TRENDnet TV-IP121W | User's Guide - Page 21
    camera.  Live View/Setup Switch - Click Setup to configure the camera. For details, see Chapter 4.  Function Buttons - Use these buttons to control the video functions.  Manual to find these recorded files that are stored by Snapshot or Manual Record. You will need to disable the protected mode of
  • TRENDnet TV-IP121W | User's Guide - Page 22
    click Properties to bring up the Internet Protocol [TCP/IP] Properties window. 6. To configure a fixed IP address that is within the segment of the camera, select the Use the following IP address option. Then, enter an IP address into the empty field. The suggested IP address is 192.168.10.x (x is
  • TRENDnet TV-IP121W | User's Guide - Page 23
    the Web browser and the provided software application SecurView™ (see chapter 5 in more detail). This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser. To configure the camera, click Setup on the main page of Web Configuration
  • TRENDnet TV-IP121W | User's Guide - Page 24
    , Motion detect, Event Config, Tools, and Information. 4.2 Using Smart Wizard The camera's Smart Wizard lets you configure your camera easily and quickly. The wizard will guide you through the necessary settings with detailed instructions on each step. To start the wizard, click Smart Wizard in the
  • TRENDnet TV-IP121W | User's Guide - Page 25
    Step 2. IP Settings Enter Camera name, Location, New Admin password and enter again to confirm Admin password Select the IP setting according to your network: DHCP, Static IP, or PPPoE. Step 3. Email Settings - 24 -
  • TRENDnet TV-IP121W | User's Guide - Page 26
    Step 4. Wireless Networking Enter the required information to be able to send email with an image Select Enable to enable the wireless function of the camera, and then complete the required settings. - 25 -
  • TRENDnet TV-IP121W | User's Guide - Page 27
    Settings This step shows all the setting information you imputed. This step shows the configuration of your camera. When you confirm the settings, click Apply to finish the wizard and reboot the camera. Otherwise, click Prev to go back to the previous step(s) and change the settings; or click
  • TRENDnet TV-IP121W | User's Guide - Page 28
    4.3 Basic Setup The Basic menu contains three sub-menus that provide the system settings for the camera, such as the Camera Name, Location, Date & Time, and User management. - 27 -
  • TRENDnet TV-IP121W | User's Guide - Page 29
    Basic >> System  Basic - Camera Name: Enter a descriptive name for the camera. - Location: Enter a descriptive name for the location used by the camera.  Indication LED This item allows you to set the LED illumination as desired. There are two options: Normal and OFF. - 28 -
  • TRENDnet TV-IP121W | User's Guide - Page 30
    with PC: Select this option and the date & time settings of the camera will be synchronized with the connected computer. - Synchronize with NTP Server: Select You need to enter the IP address of the server and select the update interval in the following two boxes. - Manual: Select this option to set
  • TRENDnet TV-IP121W | User's Guide - Page 31
    strongly recommend to change the default administrator password. Type the administrator password twice to set and confirm the password.  General User - User Name: Enter the user's name you want to add to use the camera. - Password: Enter the password for the new user. When you are finished, click
  • TRENDnet TV-IP121W | User's Guide - Page 32
    the one you want to delete and click Delete.  Guest - User Name: Enter the guest's name you want to add to use the camera. - Password: Enter the password for the new guest. - User List: Display the existing guests of the camera. To delete a user, select the one you want to delete and click Delete
  • TRENDnet TV-IP121W | User's Guide - Page 33
    4.4 Network Settings The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless network. - 32 -
  • TRENDnet TV-IP121W | User's Guide - Page 34
    Network >> Network  IP Setting This item allows you to select the IP Address mode and set up the related configuration. - DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP server automatically. - 33 -
  • TRENDnet TV-IP121W | User's Guide - Page 35
    have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP Address from the ISP as starting up. NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email to you. Therefore, when you
  • TRENDnet TV-IP121W | User's Guide - Page 36
    the network. The default RTSP (Real Time Streaming Protocol) port is 554. NOTE If the camera is behind an NAT router of firewall, the suggested to be used is from 1024 to 65535. Network >> IP Filter The IP Filter setting allows the administrator of the camera to limit the users within a certain
  • TRENDnet TV-IP121W | User's Guide - Page 37
    displays the range setting(s) of IP addresses that are not allowed to access the camera. To clear the setting, select a range of IP addresses from the list and click Delete. Network >> Wireless Setting  Wireless The camera supports WLAN while you use the wireless network. Select the Enable option
  • TRENDnet TV-IP121W | User's Guide - Page 38
    }: Keep the default setting of this option to connect the camera to any access point under the infrastructure network mode. To connect the camera to a specified access point, set a SSID for the camera to correspond with the access point's ESS-ID. To connect the camera to an Ad-Hoc wireless workgroup
  • TRENDnet TV-IP121W | User's Guide - Page 39
    users who do not have access to network authentication servers. The user has to manually enter the starting password in their access point or gateway, as well as in each PC on the wireless the data encryption feature to secure the camera within the wireless network. Format: Once you enable the
  • TRENDnet TV-IP121W | User's Guide - Page 40
    4.5 Setting up Video & Audio The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera. Video & Audio >> Camera - 39 -
  • TRENDnet TV-IP121W | User's Guide - Page 41
    to restore the default settings of the three options above. - Mirror: Select the Horizontal option to mirror the image horizontally. Select the Vertical option to mirror the image vertically. - Light Frequency: Select the proper frequency according to the camera's location: 50Hz, 60Hz, or Outdoor
  • TRENDnet TV-IP121W | User's Guide - Page 42
    levels: Lowest, Low, Medium, High, and Highest. - Frame Rate: Select Auto or a proper setting depending on your network status. Video & Audio >> Audio  Camera Microphone In Select the Enable option to enable the camera's audio function, so that you can receive the on-site sound and voice from the
  • TRENDnet TV-IP121W | User's Guide - Page 43
    two sub-menus that allow you to upload images to FTP, and send emails that include still images. When you complete the required settings for FTP, or Email, click Test to test the related configuration is correct or not. Once the camera connects to the server successfully, click Apply. - 42 -
  • TRENDnet TV-IP121W | User's Guide - Page 44
    Server Setting>> FTP  FTP - Host Address: Enter the IP address of the target FTP server. - Port Number: Enter the port number used for the FTP server. - User Name: Enter the user name to login into the FTP server. - Password: Enter the password to login into the FTP server. - Directory Path: Enter
  • TRENDnet TV-IP121W | User's Guide - Page 45
    then enter the User Name and Password according to the mail server configuration. - Sender User Name: Enter the user name to login the mail server. - Sender Password: Enter the password to login the mail server. - Receiver #1 Email Address: Enter the first email address of the user who will receive
  • TRENDnet TV-IP121W | User's Guide - Page 46
    address of the user who will receive the email. 4.7 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from
  • TRENDnet TV-IP121W | User's Guide - Page 47
    - Threshold: Move the slide bar to adjust the level for detecting motion to record video. 4.8 Event Config The Event Config menu contains four sub-menus that provide the commands to configure event profiles. - 46 -
  • TRENDnet TV-IP121W | User's Guide - Page 48
    Setting - Snapshot/Recording Subfolder: You can assign a given subfolder for captured file. Otherwise, leave this option blank to use the default setting. Event Configuration >> Arrange Schedule Profile This sub-menu displays the scheduled profile(s). To customize the profile, click Add and then
  • TRENDnet TV-IP121W | User's Guide - Page 49
    After entering the profile name, click OK and the profile is added to the Schedule Profiles list. To delete the profile, select the profile in the list and click Delete. - Profile Name: Display the profile name that you select in the Schedule Profiles list. - 48 -
  • TRENDnet TV-IP121W | User's Guide - Page 50
    weekday. Event Configuration >> Motion Detect Trigger Select the Enable option to enable the trigger function of the camera, so that you can send captured images within the detecting area to the FTP server, or email receiver. You have to configure corresponding settings, such as FTP server and
  • TRENDnet TV-IP121W | User's Guide - Page 51
    Action: Select the destination that the captured images will be sent to: Send Email, or FTP Upload. Event Configuration >> Schedule Trigger You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the Enable option on each item, and then select a Schedule
  • TRENDnet TV-IP121W | User's Guide - Page 52
    4.9 Tools The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera. - 51 -
  • TRENDnet TV-IP121W | User's Guide - Page 53
    Click Browse to locate the backup file and then click Restore.  Update Firmware This item displays the current firmware version. You can upgrade the firmware for your camera once you obtained a latest version of firmware. - Select the firmware: Click Browse to locate the backup file and then click
  • TRENDnet TV-IP121W | User's Guide - Page 54
    4.10 Information The Information menu displays the current configuration and events log of the camera.  Device Info Display the Basic, Video, Network, and Wireless settings of the camera. - 53 -
  • TRENDnet TV-IP121W | User's Guide - Page 55
     System Log The Logs table displays the events log recorded by the system. - 54 -
  • TRENDnet TV-IP121W | User's Guide - Page 56
    CHAPTER 5 SECURVIEW™ SOFTWARE This chapter describes detailed instructions on operating SecurView™ software, a useful friendly application for ease of control and navigation requirement. 5.1 Installation 1. Insert the Installation CD-ROM into your computer's CD- ROM drive to initiate the
  • TRENDnet TV-IP121W | User's Guide - Page 57
    ™, you must have Microsoft .NET Framework 2.0 installed in the computer. The setup wizard will detect it and, if the program is not installed yet, ask you to install it during the process of installing SecurView™. 3. Then SecurView Setup Wizard will appear. Click Next when the Welcome to the
  • TRENDnet TV-IP121W | User's Guide - Page 58
    4. Click Browse to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\SecurView. Then click Next. - 57 -
  • TRENDnet TV-IP121W | User's Guide - Page 59
    5. Click Next to confirm the SecurView software to be installed to the computer - 58 -
  • TRENDnet TV-IP121W | User's Guide - Page 60
    6. When the Installation Complete window appears, click Close. 7. After installing the IPSetup utility, the application is automatically installed to your computer, and creates a folder in Start\Program\TRENDnet\SecurView. - 59 -
  • TRENDnet TV-IP121W | User's Guide - Page 61
    Installation 1. To launch the program, click Start>Program>TRENDnet>SecurView, and then click SecurView™. The main screen will appear as below. NOTE Please set the resolution to 1024 x 768 or above on your computer while using SecurView™; otherwise, the displayed main screen may be distorted
  • TRENDnet TV-IP121W | User's Guide - Page 62
    main screen of SecurView™. - Play: Click to play the recorded video file using the media player on the computer (for example, Windows Media Player by default). - Lock: Click to lock the camera controls. Click again to resume controls for the camera. If you have set ID and Password in Setting>Account
  • TRENDnet TV-IP121W | User's Guide - Page 63
    manual recording camera. For Schedule recording, please change the setting on configuration. TIP By default, the ID and Password boxes are "blank." Click Setting>Account to change the ID and Password of the lock/unlock function.  VIEW SELECTION Panel - View mode buttons: SecurView™ provides
  • TRENDnet TV-IP121W | User's Guide - Page 64
    CAMERA Panel - TRIGGER OUT: Click to turn on the trigger out connector of the camera. This button is available only when the connected camera supports camera. Click again to stop recording and save the file in the computer. - TALK: Click to speak out through the camera. Please note only one user
  • TRENDnet TV-IP121W | User's Guide - Page 65
    - LISTEN: Click to receive the on-site sound and voice from the camera.  SYSTEM Panel This panel displays the current date and time.  Video View Window and Camera List Video Viewing Window - 64 - Camera List
  • TRENDnet TV-IP121W | User's Guide - Page 66
    displays the video view of the selected camera, which can be divided into 4/9/16 windows according to your selection in VIEW SELECTION panel. - Camera List: This list displays the information of the connected camera(s). To add a camera 1. Click SETTING in the CONTROLS panel to display the Setting
  • TRENDnet TV-IP121W | User's Guide - Page 67
    camera's IP Address. Click Search camera to search for an available camera within the network. Once the camera is found and is shown in the list, select it and click Add Camera.  Select the Input tab to add a camera by entering its IP Address directly. Enter the camera's IP Address (default: 192
  • TRENDnet TV-IP121W | User's Guide - Page 68
    4. Enter the User name and Password for the camera, and then click OK. The connected camera will be displayed in the Camera's List. 5. Click SETTING to return to the Video View Window. The video view of the selected camera will be displayed now. - 67 -
  • TRENDnet TV-IP121W | User's Guide - Page 69
    To remove a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Select a camera from the list and click Delete Camera. - 68 -
  • TRENDnet TV-IP121W | User's Guide - Page 70
    Select a camera Delete a camera To link to the Web page of the camera Click SETTING>Camera List>Camera Configuration and then Link web page to launch the Web browser that displays live view image and Web Configuration of the selected camera. - 69 -
  • TRENDnet TV-IP121W | User's Guide - Page 71
    To Record Video SecurView™ provides three methods to record video clips: one is to click the RECORD/All Record button to record manually; the second is to record by motion detection; the third is to set the recording schedule in Setting>Recording Configuration>Schedule Recording Configuration. 
  • TRENDnet TV-IP121W | User's Guide - Page 72
    When the motion detection function of the selected camera is enabled, you can configure the camera to start recording triggered by the motion detected. Click SETTING>Motion Configuration, and then select the Recording option to enable the selected camera to record by motion detection. - 71 -
  • TRENDnet TV-IP121W | User's Guide - Page 73
     Schedule Recording Configuration This recording method will work after you have completed the required settings in the Schedule Recording Configuration. The recording schedule can be defined by Dates or Days. - Dates: Select the camera from the pull-down list. - 72 -
  • TRENDnet TV-IP121W | User's Guide - Page 74
    Select a camera Add Schedule - Then, click Add to set the Start/Stop date and time and then click OK to add the recording schedule to the list. - Click Apply to save the settings. - 73 -
  • TRENDnet TV-IP121W | User's Guide - Page 75
    Days: First, select the camera from the pull-down list and select Days tab. Then, select the weekday from the day buttons and then set the time period. Click Apply to save the settings. - 74 -
  • TRENDnet TV-IP121W | User's Guide - Page 76
    To configure the recording settings To configure the recording settings, including the storage folder and storage options, click SETTING>Recording Configuration. - 75 -
  • TRENDnet TV-IP121W | User's Guide - Page 77
    so that the video will be recorded as another file automatically when the recording file reaches the specified size limit.  Reserved HDD space for each camera: This option allows you to set to reserve the storage space on the hard disk drive for the recording of each
  • TRENDnet TV-IP121W | User's Guide - Page 78
    media player on the computer, such as Windows Media Player. To start playback, simply click the PLAY button on the CONTROLS panel, and the following dialog screen will appear, allowing you to select the file to playback. Select the recorded video file under the [camera] path and then click Open to
  • TRENDnet TV-IP121W | User's Guide - Page 79
    code from http://www.xvid.org/downloads.15.0.html to support. To set up motion detection options When the motion detection function of the selected camera is enabled, you can set the Motion Options by selecting Alarm, Recording, Send e-Mail, and Trigger Out under SETTING> Motion Configuration. 
  • TRENDnet TV-IP121W | User's Guide - Page 80
    enable the camera to record by motion detected.  Send Email: Select this option so that the system will be able to send an email to the Email Configuration. - Mail Server: Enter the mail server address. For example, mymail.com. - Mail From: Enter the email address of the user who will send the email
  • TRENDnet TV-IP121W | User's Guide - Page 81
    selected camera supports Trigger Out connector, select this option to enable the Trigger out function. Account Click SETTING>Account to setup the username & password to lock & unlock the main screen of the SecurView. Other Click SETTING>Other to setup the scanning time between cameras. The default
  • TRENDnet TV-IP121W | User's Guide - Page 82
    Information Click SETTING>About to display the information of the software application. - 81 -
  • TRENDnet TV-IP121W | User's Guide - Page 83
    4MB NOR Flash Power DC 5V  Communication LAN WLAN 10/100Mbps Fast Ethernet, auto-sensed, Auto-MDIX IEEE 802.11b/g Protocol support TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, PPPoE, UPnP  User Interface LAN Antenna Reset One RJ-45 port One external antenna One Reset button - 82 -
  • TRENDnet TV-IP121W | User's Guide - Page 84
    LEDs Power LED (amber); Link LED (green)  Audio Input Codec  Software OS Support Browser Built-in MIC PCM Windows 2000/XP/Vista Internet Explorer 6.0 or above Apple Safari 2 or above Mozilla Firefox 2.00 or above Software Ultra View for playback/recording/ configuration features  Operating
  • TRENDnet TV-IP121W | User's Guide - Page 85
    Address Resolution Protocol. ARP is a protocol that resides at the TCP/IP Internet layer that delivers data on the same network by translating an IP address to a physical address. Audio Video Interleave, it is a Windows platform audio and video file type, a common format for small movies and videos
  • TRENDnet TV-IP121W | User's Guide - Page 86
    the hassle of manually assigning it a unique IP address. DHCP allows the specification for the service provided by a router, gateway, or other network device that automatically assigns an IP address to any device that requests one. Domain Name System is an Internet service that translates domain
  • TRENDnet TV-IP121W | User's Guide - Page 87
    prevent unauthorized access to or from a private network. Firewalls are frequently used to prevent unauthorized Internet users from accessing private networks connected to the Internet, especially Intranets all messages entering or leaving the intranet pass through the firewall, which examines each
  • TRENDnet TV-IP121W | User's Guide - Page 88
    same software you will find on the public Internet. The only difference is that an Intranet is used for internal usage only. Internet The Internet is Internet service provider controls the IP address of any device it connects to the Internet. The IP addresses in your network must conform to IP
  • TRENDnet TV-IP121W | User's Guide - Page 89
    LAN M MJPEG MPEG4 that "owns" that IP address. ISP (Internet Service Provider) is a company that maintains a network that is linked to the Internet by way of a dedicated communication line. and reception of high-quality audio and video over the Internet and next-generation mobile telephones. - 88 -
  • TRENDnet TV-IP121W | User's Guide - Page 90
    analog audio signals into digital form for transmission. Packet Internet Groper, a utility used to determine whether a specific IP address is accessible. It functions by sending a packet to the specified address and waits for a reply. It is primarily used to troubleshoot Internet connections
  • TRENDnet TV-IP121W | User's Guide - Page 91
    software or hardware entity charged with routing packets between networks. RTP (Real-time Transport Protocol) is a data transfer protocol defined to deliver live media to the clients at the same time, which defines the transmission of video and audio files in real time for Internet applications
  • TRENDnet TV-IP121W | User's Guide - Page 92
    a standard protocol that delivers the real-time communication for Voice over IP (VoIP), which establishes sessions for features such as audio and video conferencing. The Simple Mail Transfer Protocol is used for Internet mail. Simple Network Management Protocol. SNMP was designed to provide a common
  • TRENDnet TV-IP121W | User's Guide - Page 93
    Name Utility UTP W WAN WEP Windows WPA WPA2 ports. The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite The USERNAME is the unique name assigned to each person who has access to the LAN. It is a program that performs a specific task. Unshielded
  • TRENDnet TV-IP121W | User's Guide - Page 94
    purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do
  • TRENDnet TV-IP121W | User's Guide - Page 95
    service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada
  • TRENDnet TV-IP121W | User's Guide - Page 96
    OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET'S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY - 95 -
  • TRENDnet TV-IP121W | User's Guide - Page 97
    by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/
  • TRENDnet TV-IP121W | User's Guide - Page 98
    - 97 -
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98