TRENDnet TV IP312 User's Guide
TRENDnet TV IP312 - SecurView Day/Night Internet Surveillance Camera Server Manual
 |
UPC - 710931303353
View all TRENDnet TV IP312 manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV IP312 manual content summary:
- TRENDnet TV IP312 | User's Guide - Page 1
- TRENDnet TV IP312 | User's Guide - Page 2
you for purchasing the TV-IP312/TV-IP312W SecurView Wire/Wireless Internet Camera Server or Day/Night Internet Camera Server, a powerful dual-codec wireless network camera with the 2way audio function that provides the high-quality image and on-thespot audio via the Internet connection. The Infrared - TRENDnet TV IP312 | User's Guide - Page 3
Chapter 6 Appendix provides the specification of the camera and some useful information for using your camera. NOTE The illustrations and configuration values in this guide are for reference only. The actual settings depend on your practical application of the camera. - 2 - - TRENDnet TV IP312 | User's Guide - Page 4
3.1 USING IP SETUP 16 3.2 ACCESSING TO THE CAMERA 21 3.3 CONFIGURING THE IP ADDRESS OF THE PC 24 CHAPTER 4 25 CONFIGURING THE CAMERA 25 4.1 USING THE WEB CONFIGURATION 25 4.2 USING SMART WIZARD 26 4.3 BASIC SETUP 31 4.4 NETWORK SETTINGS 36 4.5 SETTING UP VIDEO & AUDIO 44 4.6 EVENT SERVER - TRENDnet TV IP312 | User's Guide - Page 5
4.10 USB 64 4.11 INFORMATION 66 CHAPTER 5 68 SECURVIEW™ SOFTWARE 68 5.1 INSTALLATION 68 5.2 USING INSTALLATION 74 ITEM FEATURES 75 TO ADD A CAMERA 81 TO REMOVE A CAMERA 84 TO LINK TO THE WEB PAGE OF THE CAMERA 85 TO RECORD VIDEO 86 TO CONFIGURE THE RECORDING SETTINGS 92 TO PLAYBACK THE - TRENDnet TV IP312 | User's Guide - Page 6
Please check the packaging contents. The packaging should include the following: TV-IP312/TV-IP312W Multi-Language Quick Installation Guide CD-ROM (Utility & User's Guide) Detachable External Antenna (for TV-IP312W only) Camera Stand. RJ-45 Ethernet Cable AC Power Adapter (5VDC, 2.5A - TRENDnet TV IP312 | User's Guide - Page 7
1.2 Getting to Know Your Camera TV-IP312 (Front/Back View) - 6 - - TRENDnet TV IP312 | User's Guide - Page 8
TV-IP312W (Front/Back View) - 7 - - TRENDnet TV IP312 | User's Guide - Page 9
the environmental light level. - Power LED: A steady orange light indicates the camera is powered on. - Link LED: A flash green light indicates the camera's network connection correctly. - Detachable Antenna (TV-IP312W only): The detachable external antenna allows you to adjust its position to - TRENDnet TV IP312 | User's Guide - Page 10
RJ-45 cable, which supports the NWay protocol so that the camera can detect the network speed automatically. - Reset Button: Reset will be initiated when the reset button is pressed once. The power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously - TRENDnet TV IP312 | User's Guide - Page 11
-spot audio via the Internet, allowing you to monitor the on-site voice. In addition, you can connect an external speaker to the camera to speak through the camera; the camera is embedded with an echo cancellation processor to provide a better sound quality. Day & Night Surveillance Supported The - TRENDnet TV IP312 | User's Guide - Page 12
Remote Control Supported By using a standard Web browser or the bundled SecurView™ software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also - TRENDnet TV IP312 | User's Guide - Page 13
1.4 System Requirement Networking LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet. WLAN: IEEE 802.11b/g. Accessing the Camera using : 800x600 or above Browser: Microsoft® Internet Explorer 6.0 or above Accessing the Camera using SecurView™ Software View Platform: Microsoft® Windows® 7 - TRENDnet TV IP312 | User's Guide - Page 14
the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock the camera. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand. The Camera Stand - TRENDnet TV IP312 | User's Guide - Page 15
to the network. Connects an antenna to the antenna connector. (TV-IP312W only) Attach the external power supply to the DC power input connector located on Camera's real Panel, and then connect it to your local power supply. NOTE Please configure the wireless setting via the wire connection. - 14 - - TRENDnet TV IP312 | User's Guide - Page 16
and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. The following diagram explains one of the typical applications for your camera and provides a basic example for installing - TRENDnet TV IP312 | User's Guide - Page 17
Installation CD-ROM, allowing you to search the camera on your network easily. 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the Auto-Run program. 2. Click the IP Setup from the Auto-Run menu screen. Then IP Setup Wizard will appear. Click "Next" when the Welcome - TRENDnet TV IP312 | User's Guide - Page 18
3. Click "Browse" to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\IPSetup. Then Click "Next". 4. Click "Next" to confirm the IPSetup software to be installed to the computer. - 17 - - TRENDnet TV IP312 | User's Guide - Page 19
5. When the Installation Complete window appears, click "Finish". - 18 - - TRENDnet TV IP312 | User's Guide - Page 20
application is automatically installed to your computer, and creates a folder in " Start \Program\TRENDnet\IPSetup". 7. Click Start > Programs > TRENDnet > IPSetup, and then click IPSetup 8. The IPSetup window will appear. It will search the Camera within the same network. Camera Display Area - 19 - - TRENDnet TV IP312 | User's Guide - Page 21
Double click the IP address, it will link to Camera's Web Configuration page. - Change IP: Click this button to bring up the following window. It allows you to change the IP Address. You can select either Static IP or click DHCP. Then, enter the Administrator ID & password. By default ID/password is - TRENDnet TV IP312 | User's Guide - Page 22
3.2 Accessing to the Camera 1. Open the Web browser on your computer (example showed in the User's Guide is based on the Internet Explorer) 2. Type the default IP address (192.168.10.30) and then press [Enter]. 3. When the login window appears, enter the default User name (admin) and password (admin - TRENDnet TV IP312 | User's Guide - Page 23
. Permission request depends on the Internet security settings of your computer. Click Yes to proceed. After you login into the Web Configuration of the camera, the main page will appear as below: Camera Information Zoom In Live View/ Setup Compression Function Night Mode Live View Image The main - TRENDnet TV IP312 | User's Guide - Page 24
frame rate of video setting. (TV-IP312/TV-IP312W only) Live View Image - Displays the real-time image of the connected camera. Zoom In - Click the buttons to zoom in the live view image by 1x, 2x, and 3x. Live View/Setup Switch - Click Setup to configure the camera. For details, see Chapter - TRENDnet TV IP312 | User's Guide - Page 25
click Properties to bring up the Internet Protocol [TCP/IP] Properties window. 6. To configure a fixed IP address that is within the segment of the camera, select the Use the following IP address option. Then, enter an IP address into the empty field. The suggested IP address is 192.168.10.x (x is - TRENDnet TV IP312 | User's Guide - Page 26
through the Web browser or from the SecurView™ software (see chapter 5 in more detail). This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser. To configure the camera, click Setup on the main page of Web Configuration. The - TRENDnet TV IP312 | User's Guide - Page 27
, Basic, Network, Video/Audio, Event Server, Motion detect, Event Config, Tools, USB, and Information. 4.2 Using Smart Wizard The camera's Smart Wizard lets you configure your camera easily and quickly. The wizard will guide you through the necessary settings with detailed instructions on each step - TRENDnet TV IP312 | User's Guide - Page 28
Step 1. Camera Settings Step 2. IP Settings Enter Camera name, Location, New Admin password and enter again to confirm Admin password Select the IP setting according to your network: DHCP, Static IP, or PPPoE. - 27 - - TRENDnet TV IP312 | User's Guide - Page 29
Step 3. Email Settings Enter the required information to be able to send email with image. - 28 - - TRENDnet TV IP312 | User's Guide - Page 30
Step 4. Wireless Networking (for TV-IP212W/TV-IP312W only) Select Enable to enable the wireless function of the camera, and then complete the required settings. - 29 - - TRENDnet TV IP312 | User's Guide - Page 31
Step 5. Confirm Settings This step shows all the setting information. This step shows the configuration of your camera. When you confirm the settings, click Apply to finish the wizard and reboot the camera. Otherwise, click Prev to go back to the previous step(s) and change the settings; or click - TRENDnet TV IP312 | User's Guide - Page 32
4.3 Basic Setup The Basic menu contains three sub-menus that provide the system settings for the camera, such as the Camera Name, Location, Date & Time, and User management. - 31 - - TRENDnet TV IP312 | User's Guide - Page 33
Basic >> System Basic - Camera Name: Enter a descriptive name for the camera. - Location: Enter a descriptive name for the location used by the camera. Indication LED This item allows you to set the LED illumination as desired. There are two options: Normal and OFF. - 32 - - TRENDnet TV IP312 | User's Guide - Page 34
of the camera will be synchronized with the connected computer. - Synchronize with NTP Server: Select this option and the time will be synchronized with the NTP Server. You need to enter the IP address of the server and select the update interval in the following two boxes. - Manual: Select this - TRENDnet TV IP312 | User's Guide - Page 35
Administrator To prevent unauthorized access to the camera's Web Configuration, you are strongly recommend to change the default administrator password. Type the administrator password twice to set and confirm the password. General User - User Name: Enter the user's name you want to add to use - TRENDnet TV IP312 | User's Guide - Page 36
Mode http://camera_ip_address:port number/mpgview.htm MJPEG Mode http://camera_ip_address:port number/jpgview.htm NOTE The "General User" can access the camera and control the Function buttons of the camera's Web Configuration; the "Guest' can only view the live view image from the main page of the - TRENDnet TV IP312 | User's Guide - Page 37
4.4 Network Settings The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless network. - 36 - - TRENDnet TV IP312 | User's Guide - Page 38
Network >> Network IP Setting This item allows you to select the IP address mode and set up the related configuration. - DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP server automatically. - 37 - - TRENDnet TV IP312 | User's Guide - Page 39
via the ADSL modem. You should have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP address from the ISP as starting up. NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email - TRENDnet TV IP312 | User's Guide - Page 40
interoperability. In addition, it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall. Select the Enable option to enable this feature. Ports Number - HTTP Port: The default HTTP port is 80. - RTSP Port: Configure the transmission of - TRENDnet TV IP312 | User's Guide - Page 41
allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera. Start/End IP Address Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End IP address. When you are finished, click - TRENDnet TV IP312 | User's Guide - Page 42
>> Wireless Setting (for TV-IP312W only) Wireless The camera supports WLAN while you use the wireless network. Select the Enable option to enable this feature. - Network ID (SSID}: The default SSID setting is "TRENDnet". To connect the camera to a specified access point, set a SSID for the camera - TRENDnet TV IP312 | User's Guide - Page 43
WEP settings. WPA-PSK/WPA2-PSK is specially designed for the users who do not have access to network authentication servers. The user has to manually enter the starting password in their access point or gateway, as well as in each PC on the wireless network. If you select Open or Shared-key as the - TRENDnet TV IP312 | User's Guide - Page 44
Encryption: Select the WEP option to enable the data encryption feature to secure the camera within the wireless network. Format: Once you enable the Encryption feature, you need to determine the encryption format by selecting ASCII or HEX. ASCII format causes each character - TRENDnet TV IP312 | User's Guide - Page 45
4.5 Setting up Video & Audio The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera. Video & Audio >> Camera - 44 - - TRENDnet TV IP312 | User's Guide - Page 46
to restore the default settings of the three options above. - Mirror: Select the Horizontal option to mirror the image horizontally. Select the Vertical option to mirror the image vertically. - Light Frequency: Select the proper frequency according to the camera's location: 50Hz, 60Hz, or Outdoor - TRENDnet TV IP312 | User's Guide - Page 47
Video & Audio >> Video MPEG4 - Video Resolution: Select the desired video resolution from the three formats: VGA, QVGA and QQVGA. The higher setting (VGA) obtains better video quality - TRENDnet TV IP312 | User's Guide - Page 48
With Audio to transfer the video clips without or with audio. If you use a mobile phone that supports 3GPP, you can also view the real-time streaming image captured by the camera on your phone (with the default player on the phone) by entering the RTSP link: rtsp://(IP address of the camera)/3gp - TRENDnet TV IP312 | User's Guide - Page 49
Microphone In Select the Enable option to enable the camera's audio function, so that you can receive the on-site sound and voice from the camera. Camera Speaker Out Select the Enable option to enable the camera's external speaker function, so that the connected speaker can play the sound and - TRENDnet TV IP312 | User's Guide - Page 50
to FTP, send emails that include still images, and store the images to a NAS system. When you complete the required settings for FTP, Email, or Network Storage, click Test to test the related configuration is correct or not. Once the camera connects to the server successfully, click Apply. - 49 - - TRENDnet TV IP312 | User's Guide - Page 51
Setting>> FTP FTP - Host Address: Enter the IP address of the target FTP server. - Port Number: Enter the port number used for the FTP server. - User Name: Enter the user name to login into the FTP server. - Password: Enter the password to login into the FTP server. - Directory Path: Enter the - TRENDnet TV IP312 | User's Guide - Page 52
Email Email - SMTP Server Address: Enter the mail server address. For example, mymail.com. - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected]. - Sender User Name: Enter the user name to login the mail server. - Sender Password: Enter - TRENDnet TV IP312 | User's Guide - Page 53
Setting >> Network Storage Net Storage - Samba Server Address: Enter the IP address of the Network Storage server. For example: 192.168.10.51. - Share: Assign the folder on the Network Storage server to share the files to users. For example, SAC7001-e1. - Path: Assign the path for uploading the - TRENDnet TV IP312 | User's Guide - Page 54
- When Disk Full: Select Stop Recording or Recycle - Delete Oldest Folder of File when the storage space on the Network Storage server is full. - 53 - - TRENDnet TV IP312 | User's Guide - Page 55
Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from the pulldown list, and then select Enable. When the detecting - TRENDnet TV IP312 | User's Guide - Page 56
- Name: Assign a name to the detecting area. - Threshold: Move the slide bar to adjust the level for detecting motion to record video. - 55 - - TRENDnet TV IP312 | User's Guide - Page 57
4.8 Event Config The Event Config menu contains four sub-menus that provide the commands to configure event profiles. - 56 - - TRENDnet TV IP312 | User's Guide - Page 58
- Snapshot/Recording Filename Prefix: You can assign a given prefix to each new captured file. Otherwise, leave this option blank to use the default setting. - Network Storage Recording Time Per Even: Limit the recording time while you are using the Network Storage solution. Event Configuration - TRENDnet TV IP312 | User's Guide - Page 59
After entering the profile name, click OK and the profile is added to the Schedule Profiles list. To delete the profile, select the profile in the list and click Delete. - Profile Name: Display the profile name that you select in the Schedule Profiles list. - Weekdays: Select the weekday(s) that you - TRENDnet TV IP312 | User's Guide - Page 60
>> Motion Detect Trigger Select the Enable option to enable the trigger function of the camera, so that you can send captured images within the detecting area to the FTP server, email receiver, Network Storage server, or the connected USB device. You have to configure corresponding settings, such as - TRENDnet TV IP312 | User's Guide - Page 61
, Record to Network Storage, or Save Image to USB. Event Configuration >> Schedule Trigger You can separately configure the schedule for trigger function of the camera by Email, FTP, or Network Storage. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list - TRENDnet TV IP312 | User's Guide - Page 62
recorded file becomes a non-stop video clip because the camera will record a 10-second video clip every 5 seconds. - 61 - - TRENDnet TV IP312 | User's Guide - Page 63
4.9 Tools The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera. - 62 - - TRENDnet TV IP312 | User's Guide - Page 64
Factory Reset Click Reset to restore all factory default settings for the camera. System Reboot Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained after rebooting. Configuration You can save your camera configuration as a - TRENDnet TV IP312 | User's Guide - Page 65
of the connected USB device. USB Dismount To safely remove the connected USB device, you can press the Unmount button for four seconds on the camera or click Dismount from this item. USB Information Display the Total space and Free space of the USB device. - 64 - - TRENDnet TV IP312 | User's Guide - Page 66
USB Setting - When Disk Full: Select Stop Recording or Recycle - Delete Oldest Folder of File when the storage space on the USB device is full. NOTE The connected USB storage device can be only used to store still images. - 65 - - TRENDnet TV IP312 | User's Guide - Page 67
4.11 Information The Information menu displays the current configuration and events log of the camera. Device Info Display the Basic, Video & Audio, Network, and Wireless settings of the camera. - 66 - - TRENDnet TV IP312 | User's Guide - Page 68
System Log The Logs table displays the events log recorded by the system. - 67 - - TRENDnet TV IP312 | User's Guide - Page 69
This Chapter describes detail instructions on operating SecurView™ software, a useful friendly application for ease of control and navigation requirement. 5.1 INSTALLATION 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the - TRENDnet TV IP312 | User's Guide - Page 70
NOTE To use SecurView™, you must have Microsoft .NET Framework 2.0 installed in the computer. The setup wizard will detect it and, if the program is not installed yet, ask you to install it during the process of installing SecurView™. - 69 - - TRENDnet TV IP312 | User's Guide - Page 71
3. Then SecurView Setup Wizard will appear. Click "Next" when the Welcome to the SecurView Setup Wizard appears - 70 - - TRENDnet TV IP312 | User's Guide - Page 72
4. Click "Browse" to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\SecurView. Then Click "Next". - 71 - - TRENDnet TV IP312 | User's Guide - Page 73
5. Click "Next" to confirm the SecurView software to be installed to the computer. - 72 - - TRENDnet TV IP312 | User's Guide - Page 74
6. Click t When the Installation Complete window appears, click "Close". 7. After installing the IPSetup utility, the application is automatically installed to your computer, and creates a folder in " Start \Program\TRENDnet\SecurView". - 73 - - TRENDnet TV IP312 | User's Guide - Page 75
5.2 USING INSTALLATION 1. To launch the program, click Start > Program > TRENDnet > SecurView, and then click SecruView™. The main screen will appear as below. NOTE Please set the resolution to 1024x768 or above on your computer while - TRENDnet TV IP312 | User's Guide - Page 76
play the recorded video file using the media player on the computer (for example, Windows Media Player by default). - LOCK: Click to lock the camera controls. Click again to resume controls for the camera. If you have set ID and Password in SETTING > Account, you will be asked to enter the required - TRENDnet TV IP312 | User's Guide - Page 77
. To stop recording, please click Record button to stop the individual camera. Please note: stop recording only stop the manual recording camera. For schedule recording, please change the setting on configuration. TIP By default, the ID and Password boxes are "blank." Click SETTING > Account to - TRENDnet TV IP312 | User's Guide - Page 78
connected, click this button to switch the video view to the previous camera. - NEXT: When multiple cameras connected, click this button to switch the video view to the next camera. TIP To set the time interval of scanning, click SETTING > Other and then adjust the time from 1 to 10 seconds in - TRENDnet TV IP312 | User's Guide - Page 79
in the computer. - RECORD: Click to start recording a video clip using the selected camera. Click again to stop recording and save the file in the computer. - TALK: Click to speak out through the camera. Please note only one user is allowed to use this function at the same time. - LISTEN: Click to - TRENDnet TV IP312 | User's Guide - Page 80
) When you connect a pan/tilt camera, the system will detect the camera's function automatically and the PAN-TILT button ( default position. ) to return the camera to the - SWING: If you have saved two or more positions for the selected camera, click this button to control the camera swinging - TRENDnet TV IP312 | User's Guide - Page 81
Video View Window and Camera List Video Viewing Window Camera List - Video Viewing Window: This window displays the video view of the selected camera, which can be divided into 4/9/16 windows according to your selection in VIEW SELECTION panel. - Camera List: This list displays the information - TRENDnet TV IP312 | User's Guide - Page 82
To add a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Click Add New Camera. - 81 - - TRENDnet TV IP312 | User's Guide - Page 83
the camera's IP address. Click Search camera to search the available camera within the network. Once the camera is found and is shown in the list, select it and click Add Camera. Select the Input tab to add a camera by entering its IP address directly. Enter the camera's IP address (default: 192 - TRENDnet TV IP312 | User's Guide - Page 84
4. Enter the User name and Password for the camera, and then click OK. The connected camera will be displayed in the Camera List. - 83 - - TRENDnet TV IP312 | User's Guide - Page 85
5. Click SETTING to return to the Video View Window. The video view of the selected camera will be displayed now. To remove a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Select a camera from the list and click Delete Camera. - 84 - - TRENDnet TV IP312 | User's Guide - Page 86
Select a camera Delete the camera To link to the Web page of the camera Click SETTING > Camera List > Camera Configuration and then Link web page to launch the Web browser that displays live view image and Web Configuration of the selected camera. - 85 - - TRENDnet TV IP312 | User's Guide - Page 87
To record video SecurView™ provides three methods to record video clips: one is to click the RECORD/All Record button to record manually; the second is to record by motion detection; the third is to set the recording schedule in Setting > Recording Configuration > Schedule Recording Configuration. - TRENDnet TV IP312 | User's Guide - Page 88
When the motion detection function of the selected camera is enabled, you can configure the camera to start recording triggered by the motion detected. Click SETTING > Motion Configuration, and then select the Recording option to enable the selected camera to record by motion detection. - 87 - - TRENDnet TV IP312 | User's Guide - Page 89
Schedule recording Configuration This recording method will work after you have completed the required settings in Schedule Recording Configuration. The recording schedule can be defined by Dates or Days. - Dates: Select the camera from the pull-down list.. - 88 - - TRENDnet TV IP312 | User's Guide - Page 90
Select a camera Add Schedule - Then, click Add to set the Start/Stop date and time and then click OK to add the recording schedule to the list. - Click Apply to save the settings - 89 - - TRENDnet TV IP312 | User's Guide - Page 91
- 90 - - TRENDnet TV IP312 | User's Guide - Page 92
Days: First, select the camera from the pull-down list and select Days tab. Then, select the weekday from the day buttons and then set the time period. Click Apply to save the settings. - 91 - - TRENDnet TV IP312 | User's Guide - Page 93
To configure the recording settings To configure the recording settings, including the storage folder and storage options, click SETTING > Recording Configuration. Recording File Path: To change the destination folder to save the recorded video file, click Browse under the Recording File Path box - TRENDnet TV IP312 | User's Guide - Page 94
storage space on the hard disk drive for the recording of each camera. Before setting the reserve space on the hard disk drive, you is displayed in the HDD Free space field. Enable Recycle Recording: Click on the camera number to clear the files when the unreserved space of the hard disk drive is - TRENDnet TV IP312 | User's Guide - Page 95
don't have video codec to playback the recorded video. You can download video codec from http://www.xvid.org/downloads.15.0.html to support. To set up motion detection options When the motion detection function of the selected camera is enabled, you can set the Motion Options by selecting Alarm - TRENDnet TV IP312 | User's Guide - Page 96
this option so that the system will be able to send an email to the specified receiver. Once the option is selected, you have to complete the required information in SETTING > Motion Configuration > Email Configuration. - Mail Server: Enter the mail server address. For example, mymail.com. - 95 - TRENDnet TV IP312 | User's Guide - Page 97
the email address of the user who will receive the email. - User Name: Enter the user name to login the mail server. - Password: Enter the password to login the mail server. - Subject: Enter a subject for the notification email. Trigger Out: If the selected camera supports Trigger Out connector - TRENDnet TV IP312 | User's Guide - Page 98
- 97 - - TRENDnet TV IP312 | User's Guide - Page 99
Information Click SETTING > About to display the information of the software application. - 98 - - TRENDnet TV IP312 | User's Guide - Page 100
640x480 Video Compression Video resolution MPEG4/MJPEG VGA/QVGA/QQVGA; 30fps max. System Hardware Processor ARM9 base RAM 32MB SDRAM ROM 8MB NOR Flash Power DC 5V, 2.5AV Communication LAN WLAN Protocol support 10/100Mbps Fast Ethernet, auto-sensed, Auto-MDIX IEEE 802.11b/g TCP - TRENDnet TV IP312 | User's Guide - Page 101
User Interface LAN Antenna Reset USB LEDs One RJ-45 port One detachable antenna One reset button USB 1.1 port, with one unmount button; Power distribution: 500mA Max. Support FAT,FAT32 file system Power LED (orange); Link LED (green) Audio Input Output Codec Built-in MIC Headphone 3.5mm - TRENDnet TV IP312 | User's Guide - Page 102
Protocol. ARP is a protocol that resides at the TCP/IP Internet layer that delivers data on the same network by translating an IP address to a physical address. Audio Video Interleave, it is a Windows platform audio and video file type, a common format for small movies and videos. B BOOTP - TRENDnet TV IP312 | User's Guide - Page 103
the hassle of manually assigning it a unique IP address. DHCP allows the specification for the service provided by a router, gateway, or other network device that automatically assigns an IP address to any device that requests one. Domain Name System is an Internet service that translates domain - TRENDnet TV IP312 | User's Guide - Page 104
better security, data can be encrypted. A system designed to prevent unauthorized access to or from a private network. Firewalls are frequently used to prevent unauthorized Internet users from accessing private networks connected to the Internet, especially Intranets all messages entering or leaving - TRENDnet TV IP312 | User's Guide - Page 105
usage only. Internet The Internet is a globally linked system of computers that are logically connected based on the Internet Protocol (IP). The Internet provides different ways to access private and public information worldwide. Internet address To participate in Internet communications and on - TRENDnet TV IP312 | User's Guide - Page 106
" that IP address. ISP (Internet Service Provider) is a company that maintains a network that is linked to the Internet by way of a for writing programs that can be safely downloaded to your computer through the Internet without the fear of viruses. It is audio and video over the Internet and - 105 - - TRENDnet TV IP312 | User's Guide - Page 107
IP address. But the addresses may not be valid outside your network. NAT solves the problem. When devices within your network request information from the Internet, the requests are forwarded to the Internet under the router's IP address. NAT distributes the responses to the proper IP addresses - TRENDnet TV IP312 | User's Guide - Page 108
the medium, and how servers respond to workstation requests and vice versa. Common network protocols responsible for the presentation and formatting of data for a network operating system are the Internetwork Packet Exchange (IPX) protocol or the Internet Protocol (IP). Protocols that dictate the - TRENDnet TV IP312 | User's Guide - Page 109
protocol defined to deliver live media to the clients at the same time, which defines the transmission of video and audio files in real time for Internet applications. RTSP (Real-time Streaming Protocol) is the standard used to transmit stored media to the client(s) at the same time, which provides - TRENDnet TV IP312 | User's Guide - Page 110
to the medium. Transceivers also can be used on 10BASE-2 or 10BASE-T networks to attach devices with AUI ports. The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite The USERNAME is the unique name assigned to each person who has access to the LAN. It is - TRENDnet TV IP312 | User's Guide - Page 111
that provides greater data protection and network access control for Wi-Fi networks. WPA2 uses the governmentgrade AES encryption algorithm and IEEE 802.1X-based authentication, which are required to secure large corporate networks. - 110 - - TRENDnet TV IP312 | User's Guide - Page 112
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP312/TV-IP312W - 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a - TRENDnet TV IP312 | User's Guide - Page 113
more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA - TRENDnet TV IP312 | User's Guide - Page 114
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET'S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE - TRENDnet TV IP312 | User's Guide - Page 115
Some TRENDnet products include software code trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support - TRENDnet TV IP312 | User's Guide - Page 116
- 115 -
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
 |
 |
