TRENDnet TV IP312 Quick Installation Guide
TRENDnet TV IP312 - SecurView Day/Night Internet Surveillance Camera Server Manual
 |
UPC - 710931303353
View all TRENDnet TV IP312 manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV IP312 manual content summary:
- TRENDnet TV IP312 | Quick Installation Guide - Page 1
Quick Installation Guide TV-IP212/TV-IP212W TV-IP312/TV-IP312W H/W: A1.0R - TRENDnet TV IP312 | Quick Installation Guide - Page 2
TTaablbe olef CoonfteCntos ntents English ...1 1. Before You Start 1 2. Hardware Installation 2 3. Configure the Internet Camera Server 3 Troubleshooting 7 Version 02.17.2009 - TRENDnet TV IP312 | Quick Installation Guide - Page 3
Internet Camera Server (TV-IP212W) 2-Way Audio Internet Camera Server (TV-IP212) 54Mbps Wireless 10/100Mbps Wireless 2-Way Audio Day/Night Internet Camera Server (TV-IP312W) 300Mbps Wireless N Gigabit Router (TEW-633GR) Internet Modem 2-Way Audio Day/Night Internet Camera Server (TV-IP312 - TRENDnet TV IP312 | Quick Installation Guide - Page 4
port of the Internet Camera server. 3. Connect external speaker to the Internet Camera Server (optional) 4. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 5. Connect USB flash drive to the Internet Camera Server (optional) (TV-IP212W/TV-IP312W only). 6. Verify - TRENDnet TV IP312 | Quick Installation Guide - Page 5
Server from a wired computer. Since the Internet Camera's default IP address is 192.168.10.30, make sure no other network devices are assigned an IP address of 192.168.10.30. 1. Insert the Utility CD-ROM into your CD-ROM drive and then click IP Setup. 2. Follow the IPSetup Setup Wizard instructions - TRENDnet TV IP312 | Quick Installation Guide - Page 6
the camera server and click Change IP. 6. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change. By default: ID: admin Password: admin 7. Click OK and wait 30 seconds. 8. Click OK. 9. Double click the camera server to - TRENDnet TV IP312 | Quick Installation Guide - Page 7
. Click Setup, Network and then click Wireless. Configure your wireless settings to match your wireless network's settings and then click Apply (Enable/Enter the WEP/WPA key when your wireless network is encrypted. Contact your network administrator for more information). (TV-IP212W/ TV-IP312W only - TRENDnet TV IP312 | Quick Installation Guide - Page 8
regarding the TV-IP212/TV-IP212W/TV-IP312/ TV-IP312W configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support, please take - TRENDnet TV IP312 | Quick Installation Guide - Page 9
the IP address of the Internet Camera Server into the address bar. By default, the IP address is 192.168.10.30. Follow steps 9-15 in Section 3: Configure the Internet Camera Server. Click Setup, click Network and then click Network to change the IP address. Then click Apply. See instructions below - TRENDnet TV IP312 | Quick Installation Guide - Page 10
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. - TRENDnet TV IP312 | Quick Installation Guide - Page 11
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet's website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2009. All Rights Reserved. TRENDnet.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
Quick Installation Guide
TV-IP212/TV-IP212W
TV-IP312/TV-IP312W
H/W: A1.0R