TRENDnet TV-IP420P IPView App Quick Installation Guide

3

2

Add:

How to manually add a camera or NVR on the app. Use this to manually add a remote device, for local devices you can use the Scan feature.

IPView-App

IPView_App

Host:

Similar to the name assignment, devices from a local or

remote location requires separate entries. For local connections

(at home) enter the IP address of the device (camera or NVR),

usually you can find this information on your router's DHCP client

list or table. It is recommended to assign the device with a static

IP address, to avoid any changes the router may encounter. For

remote connection (away from home) enter the assigned WAN IP

address of your router. If you are using DDNS on your router, you

can simply enter your DDNS account information you have set

on your router.

Name:

Enter the assigned name of your device (camera or NVR).

To view devices from a local (at home) or remote (away from

home) location requires separate entries. Consider assigning a

name based on the location of your device. For instance, to view

your patio camera from a remote location like when you are at

work assign a name like “Remote Patio Cam”. You can assign

“Patio Cam” as a different entry to view the same camera while

you are

at home.

Port:

Enter the HTTP port assigned on your device (camera or

NVR). This is the same port you have assigned a virtual server or

port forwarding rule on your router's firewall settings.

Login:

Enter the username of your device (camera or NVR), in

most cases the username is “admin”

Passwork:

Enter the login password assigned to your device

(camera or NVR). Click save.

1