TRENDnet TV-IP422WN User's Guide
TRENDnet TV-IP422WN Manual
 |
UPC - 710931303773
View all TRENDnet TV-IP422WN manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV-IP422WN manual content summary:
- TRENDnet TV-IP422WN | User's Guide - Page 1
- TRENDnet TV-IP422WN | User's Guide - Page 2
of the camera. Chapter 2 Hardware Installation helps you install the camera according to your application environment. You can use this camera at home, at work, at any where you want. Chapter 3 Accessing the Camera lets you start using your camera without problem. The camera can be set up easily - TRENDnet TV-IP422WN | User's Guide - Page 3
THE IP ADDRESS OF THE PC 18 CHAPTER 4 19 CONFIGURING THE CAMERA 19 4.1 USING THE WEB CONFIGURATION 19 4.2 USING SMART WIZARD 20 4.3 BASIC SETUP 23 4.4 NETWORK SETTINGS 28 4.5 PAN/TILT SETTINGS 37 4.6 SETTING UP VIDEO & AUDIO 38 4.7 EVENT SERVER CONFIGURATION 43 4.8 MOTION DETECT 47 - TRENDnet TV-IP422WN | User's Guide - Page 4
CHAPTER 5 58 SECURVIEW™ PRO SOFTWARE 58 5.1 INSTALLATION 59 5.2 USING SECURVIEW™ PRO 62 CHAPTER 6 93 HOW TO ACCESS THE CAMERA BEHIND A ROUTER 93 APPENDIX 99 A.1 SPECIFICATION 99 A.2 GPIO TERMINAL APPLICATION 102 A.3 GLOSSARY OF TERMS 103 -3- - TRENDnet TV-IP422WN | User's Guide - Page 5
carefully. You should have the following: 5 One TV‐IP422WN 5 One Power Adapter 5 One External Antenna 5 One Camera Stand /Mounting Kit 5 One GPIO Connector 5 One Network Cable 5 One CD‐ROM (Utility & User's Guide) 5 One Multi‐Language Quick Installation Guide NOTE Once any item contained is damaged - TRENDnet TV-IP422WN | User's Guide - Page 6
off the Infrared LEDs according the environmental light level. Infrared LEDs (x7) allow your camera to capture clear image in a dark environment. Power LED indicates the camera is powered on with the steady amber light. USB Port* allows you to connect an external USB device. It provides the power - TRENDnet TV-IP422WN | User's Guide - Page 7
Wireless network GPIO Connectors is used to connect the external devices. Audio-out Connector connects an external active speaker. Reset Button will restart the camera when it is pressed quickly; when it is pressed and held for five seconds, the camera will resume the factory default settings - TRENDnet TV-IP422WN | User's Guide - Page 8
up/down (90/15 degrees). In addition, you can assign up to eight positions for the camera, enabling you to move the camera lens to the desired position quickly. „ Supports RTSP The camera supports RTSP (Real Time Streaming Protocol), which is a technology that allows you to view streaming media via - TRENDnet TV-IP422WN | User's Guide - Page 9
Control Supported By using a standard Web browser or the bundled SecurView Pro software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also - TRENDnet TV-IP422WN | User's Guide - Page 10
using Web Browser Platform: CPU: RAM: Resolution: User Interface: Microsoft® Windows® 2000/XP/Vista/Win7 Intel Pentium III 800MHz or above 512MB 800x600 or above Microsoft® Internet Explorer 6.0 or above „ Accessing the Camera using SecurView Pro Platform: Resolution: Microsoft® Windows® XP - TRENDnet TV-IP422WN | User's Guide - Page 11
CHAPTER 2 HARDWARE INSTALLATION 2.1 Installing the Wall Mount Kit The camera comes with a Wall Mount Kit, which allows you to place your camera anywhere by mounting the camera through the three screw holes located in the base of the Wall Mount Kit. Screw Screw Screw Wall Mount Kit - 10 - - TRENDnet TV-IP422WN | User's Guide - Page 12
external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with "default" SSID. Connecting the External Antenna NOTE If the camera cannot to your wireless network, you need to install the camera in LAN and proceed with WLAN settings. - 11 - - TRENDnet TV-IP422WN | User's Guide - Page 13
2.3 Applications of the Camera The camera can be applied in multiple applications, including: „ Monitor local and remote places and attached. The following diagram explains one of the typical applications for your camera and provides a basic example for installing the camera. Home Applications - 12 - - TRENDnet TV-IP422WN | User's Guide - Page 14
Link to connect the selected camera. Click Change IP to modify the IP address of the selected camera. Click Search to find the IP address of the connected camera(s). Click Exit to close the utility. 3. Once you get the IP address of the camera, launch the Web browser or SecurView Pro to access your - TRENDnet TV-IP422WN | User's Guide - Page 15
access to the main screen of the camera's Web Configuration. Enter the User name and Password. NOTE If you are initially access to the camera, you will be ask to install a new plug‐in for the camera. Permission request depends on the Internet security settings of your computer. Click Yes to proceed - TRENDnet TV-IP422WN | User's Guide - Page 16
After you login into the Web Configuration of the camera, the main page will appear as below: Live View/Setup Switch Zoom In Buttons Camera Information Nightmode Button Compression Buttons Pan/Tilt Buttons Live View Image Function Buttons The main page of the Web Configuration provides you - TRENDnet TV-IP422WN | User's Guide - Page 17
to zoom in the live view image by 1x, 2x, and 3x. „ Nightmode Button - Click the button to enable the "nightshot mode" to deliver clearer images in the dark environment. However, this will reduce the frame rate of video setting. „ Live View/Setup Switch - Click Setup to configure the camera. For - TRENDnet TV-IP422WN | User's Guide - Page 18
. Please note only one user is allowed to use this function at a time. z Listen allows you to receive the on‐site sound and voice from the camera. z Trigger Out allows you to trigger on/off the GPIO output manually. NOTE If your PC use Microsoft Vista platform. Maybe you can't find these recorded - TRENDnet TV-IP422WN | User's Guide - Page 19
of the PC If you are failed to access to the camera, please check the IP address of your computer. When you connect the camera to your computer directly to proceed with configuration of the camera, you need to set up the IP addresses to be in the same segment for the two devices to communicate - TRENDnet TV-IP422WN | User's Guide - Page 20
the camera, click Setup on the main page of Web Configuration. The Web Configuration will start from the Basic page. The Web Configuration contains the settings that are required for the camera in the left menu bar, including Smart Wizard, Basic, Network, Video/Audio, Event Server, Motion detect - TRENDnet TV-IP422WN | User's Guide - Page 21
will guide you through the necessary settings with detailed instructions on each step. To start the wizard, click Smart Wizard in the left menu bar. Step 1. Camera Settings Enter the name for the camera and place. Enter the administrator password. Step 2. IP Settings Select the IP setting according - TRENDnet TV-IP422WN | User's Guide - Page 22
Step 3. Email Settings Enter the required information to be able to send email with image. Step 4. Wireless Networking Complete the required settings for wireless networking. - 21 - - TRENDnet TV-IP422WN | User's Guide - Page 23
Step 5. Confirm Settings This step shows the configuration of your camera. When you confirm the settings, click Apply to finish the wizard and reboot the camera. Otherwise, click Prev to go back to the previous step(s) and change the settings; or click Cancel to end the wizard and discard the - TRENDnet TV-IP422WN | User's Guide - Page 24
4.3 Basic Setup The Basic menu contains three sub‐menus that provide the system settings for the camera, such as the Camera Name, Location, Date & Time, and User management. Basic >> System „ Basic - Camera Name: Enter a descriptive name for the camera. - Location: Enter a descriptive name for the - TRENDnet TV-IP422WN | User's Guide - Page 25
& Time - TimeZone: Select the proper time zone for the region from the pull‐ down menu. - Synchronize with PC: Select this option and the date & time settings of the camera will be synchronized with the connected computer. - 24 - - TRENDnet TV-IP422WN | User's Guide - Page 26
- Synchronize with NTP Server: Select this option and the time will be synchronized with the NTP Server. You need to enter the IP address of the server and select the update interval in the following two boxes. - Manual: Select this option to set the date and time manually. Basic >> User - 25 - - TRENDnet TV-IP422WN | User's Guide - Page 27
strongly recommend to change the default administrator password. Type the administrator password twice to set and confirm the password. „ General User - User Name: Enter the user's name you want to add to use the camera. - Password: Enter the password for the new user. When you are finished, click - TRENDnet TV-IP422WN | User's Guide - Page 28
.htm (eg. http://192.168.10.30/jpgview.htm) - Enable: User needs to enter user name and password to stream the camera. - Disable: User can stream the camera without entering the user name and password. NOTE This feature is enabled by default, and for security reason, it is recommended to have the - TRENDnet TV-IP422WN | User's Guide - Page 29
4.4 Network Settings The Network menu contains three sub‐menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless network. Network >> Network - 28 - - TRENDnet TV-IP422WN | User's Guide - Page 30
use IP Setup to obtain the related setting values. IP Enter the IP address of the camera. The default setting is 192.168.10.30. Subnet Mask Enter the Subnet Mask of the camera. The default setting is 255.255.255.0. Default Gateway Enter the Default Gateway of the camera. The default setting - TRENDnet TV-IP422WN | User's Guide - Page 31
and enter the required information in the Host Name, User Name, and Password boxes. Please note that you have to sign up for DDNS service with the service provider first. „ UPnP The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the device‐to - TRENDnet TV-IP422WN | User's Guide - Page 32
>> IP Filter The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera. „ Start/End IP Address Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End IP - TRENDnet TV-IP422WN | User's Guide - Page 33
>> Wireless Setting The camera supports WLAN while you use the wireless network. Select the Enable option to enable this feature. - Network ID (SSID}: Keep the default setting of this option to connect the camera to any access point under the infrastructure network mode. To connect the camera to - TRENDnet TV-IP422WN | User's Guide - Page 34
devices with identical WEP settings. WPA‐PSK/WPA2‐PSK is specially designed for the users who do not have access to network authentication servers. The user has to manually enter the starting password in their access point or gateway, as well as in each PC on the wireless network. If you select - TRENDnet TV-IP422WN | User's Guide - Page 35
enable the data encryption feature to secure the camera within the wireless network. Format: Once you enable the Encryption feature PSK or WPA2‐PSK as the Authentication mode, you need to complete the following settings: Encryption: Select TKIP or AES. TKIP (Temporal Key Integrity Protocol) changes - TRENDnet TV-IP422WN | User's Guide - Page 36
Wireless >> WPS Setting WPS (Wi‐Fi Protected Setup) sets a new standard of Wi‐Fi security, providing a simplified secure network setup solution for the end users. to start WPS function of the camera. d. You need to enter the PIN Code displayed on the camera to the router (or access point) within 120 - TRENDnet TV-IP422WN | User's Guide - Page 37
You need to press the WPS button on the router (or access point) within 120 seconds to complete the setup. „ Device Status Display the WPS configuration of the camera. TIP The Power LED indicates the WPS connection status by: - blinking 3 times when the connection is built successfully. - repeating - TRENDnet TV-IP422WN | User's Guide - Page 38
The Pan/Tilt menu allows you to configure the pan/tilt functions of the camera. Pan & Tilt >> Pan & Tilt Settings - Pan/Tilt Calibration: Click Calibration to calibrate the position of the camera lens. - Pan Steps: Set the changing range (1~20 degrees) when you click the Left/Right button. - Tilt - TRENDnet TV-IP422WN | User's Guide - Page 39
) of each preset positions when the camera is patrolling. - Startup Preset: Set the position (1~8, or None) to start patrolling. 4.6 Setting up Video & Audio The Video & Audio menu contains three sub‐menus that provide the video and audio settings for the camera. Video & Audio >> Camera - 38 - - TRENDnet TV-IP422WN | User's Guide - Page 40
to restore the default settings of the three options above. - Mirror: Select the Horizontal option to mirror the image horizontally. Select the Vertical option to mirror the image vertically. - Light Frequency: Select the proper frequency according to the camera's location: 50Hz, 60Hz, or Outdoor - TRENDnet TV-IP422WN | User's Guide - Page 41
Video & Audio >> Video „ MPEG4 - Video Resolution: Select the desired video resolution from the three formats: VGA, QVGA and QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within your network. - Video Quality: Select the desired image quality from five - TRENDnet TV-IP422WN | User's Guide - Page 42
setting depending on your network status. NOTE The camera supports camera on your phone (with the default player on the phone) by entering the RTSP link: rtsp://(IP address of the camera)/3gp. NOTE Your mobile phone and the service provider must support 3GPP function. Please contact your service - TRENDnet TV-IP422WN | User's Guide - Page 43
function, so that you can receive the on‐site sound and voice from the camera. „ Camera Speaker Out Select the Enable option to enable the camera's external speaker function, so that the connected speaker can play the sound and voice through the camera. - Volume: Set the speaker's volume. - 42 - - TRENDnet TV-IP422WN | User's Guide - Page 44
Server Setting>> HTTP HTTP Notify for Motion Trigger Send the query parameter via an HTTP notification when an event is triggered. - Host Address: Enter the IP of the HTTP server - Port Number: Enter the Port number of the HTTP server - User Name: Enter the username of the HTTP server - Password - TRENDnet TV-IP422WN | User's Guide - Page 45
Setting>> FTP - Host Address: Enter the IP address of the target FTP server. - Port Number: Enter the port number used for the FTP server. - User Name: Enter the user name to login into the FTP server. - Password: Enter the password , the camera may not upload number of images that you set. - 44 - - TRENDnet TV-IP422WN | User's Guide - Page 46
Event Server Setting >> Email - SMTP Server Address: Enter the mail server address. For example, smtp.mymail.com - Port number: Assign the SMTP port in the text box. The default SMTP port is 25. - Encryption connection: Select SSL or STARTTLS if your email account uses this type of authentication. ( - TRENDnet TV-IP422WN | User's Guide - Page 47
images that you set. Event Server Setting >> Network Storage - Samba Server Address: Enter the IP address of the Network Storage server. - Share: Assign the folder on the Network Storage server to share the files to users. For example, CameraRecord - Path: Assign a folder for this camera to upload - TRENDnet TV-IP422WN | User's Guide - Page 48
4.8 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from the pull‐down list, and then select Enable. When - TRENDnet TV-IP422WN | User's Guide - Page 49
bar to the left will increase the sensitivity of motion detection 4.9 Event Config The Event Config menu contains five sub‐menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Subfolder: You can assign a descriptive name for - TRENDnet TV-IP422WN | User's Guide - Page 50
Event Configuration >> Arrange Schedule Profile This sub‐menu displays the scheduled profile(s). To customize the profile, click Add and then enter a descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and the profile is added to the Schedule - TRENDnet TV-IP422WN | User's Guide - Page 51
within in the selected weekday. Event Configuration >> Motion Detect Trigger Select the Enable option to enable the motion detect trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the FTP server, email receiver, Network - TRENDnet TV-IP422WN | User's Guide - Page 52
, or FTP Upload. Event Configuration >> Schedule Trigger You can separately configure the schedule for trigger function of the camera by Email, FTP, or Network Storage. Select the Enable option on each item, and then select a Schedule Profile from the pull‐down list and set the Interval time. - 51 - - TRENDnet TV-IP422WN | User's Guide - Page 53
. Event Configuration >> GPIO Trigger Select the Enable option to enable the GPIO trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the FTP server, email receiver, Network Storage server, or the connected USB device. You - TRENDnet TV-IP422WN | User's Guide - Page 54
Email, or FTP Upload. 4.10 Tools The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera. „ Factory Reset Click Reset to restore all factory default settings for the camera. - 53 - - TRENDnet TV-IP422WN | User's Guide - Page 55
want to resume the original settings, you can restore them by retrieving the backup file. - Backup: Click Get the backup file to save the current configuration of the camera. - Restore: Click Browse to locate the backup file and then click Restore. „ Update Firmware This item displays the current - TRENDnet TV-IP422WN | User's Guide - Page 56
of the connected USB device. „ USB Dismount To safely remove the connected USB device, you can press the Unmount button for four seconds on the camera or click Dismount from this item. „ USB Information Display the Total space and Free space of the USB device. - 55 - - TRENDnet TV-IP422WN | User's Guide - Page 57
„ USB Setting - When Disk Full: Select Stop Recording or Recycle - Delete Oldest Folder of File when the storage space on the USB device is full. NOTE The - TRENDnet TV-IP422WN | User's Guide - Page 58
4.12 Device Info The Information menu displays the current configuration and events log of the camera. „ Device Info Display the Basic, Video & Audio, Network, and Wireless settings of the camera. „ System Log The Logs table displays the events log recorded by the system. - 57 - - TRENDnet TV-IP422WN | User's Guide - Page 59
application with a user‐friendly interface that allows you to access your cameras. The Software can monitor and record up to 36 cameras. It also let you change some basic settings of the camera, such as schedule profiles and motion detecting areas. The SecurView Pro also supports audio or Pan - TRENDnet TV-IP422WN | User's Guide - Page 60
, you must have Microsoft .NET Framework 2.0 installed in the computer. The setup wizard will detect it and, if the program is not installed yet, it will ask you to install it during the process of installing SecurView™ Pro. NOTE: Microsoft Windows Installer 3.0 or above is a required component to - TRENDnet TV-IP422WN | User's Guide - Page 61
3. Then SecurView Pro Setup Wizard will appear. Click "Install". 4. Wait until the program finish the installation. By default, the destination location is C:\Program Files\TRENDnet\SecurView Pro. - 60 - - TRENDnet TV-IP422WN | User's Guide - Page 62
5. Click "Finish" to finish the installation. 6. After installing the SecurView Pro, the application is automatically installed to your computer, and creates a folder in " Start \Program\TRENDnet\SecurView Pro ". - 61 - - TRENDnet TV-IP422WN | User's Guide - Page 63
Pro, click Start > All Programs > TRENDnet >SecurView Pro > SecurView Pro. You can also start the program by double‐click the SecurView Pro icon on your desktop. On the login window, enter the User name/Password and click OK to login. The default User name/Password is admin/admin. If you wish to - TRENDnet TV-IP422WN | User's Guide - Page 64
as the Quick Launch buttons, and so on. NOTE For best result, it is higher recommended to configure resolution setting to 1024 x 768 or higher; otherwise, it cannot be displayed on the screen when launching the program. X Live View Window displays the live video of the connected camera(s). - 63 - - TRENDnet TV-IP422WN | User's Guide - Page 65
/Remove email address for event notification Event Trigger: Setup event trigger configuration Device Setting : Set up the camera Recording Setting: Set up the recording path Account information: Setup administrator password Version: Display software version System Setting: Software settings - 64 - - TRENDnet TV-IP422WN | User's Guide - Page 66
. Automatically switch the live view of each connected cameras in single camera view mode by 30 seconds*. Click once to start and click again to stop. * The auto‐switch time is set as 30 seconds by default, which can be changed by clicking the Æ System Setting and then change the value from the pull - TRENDnet TV-IP422WN | User's Guide - Page 67
the view from the map easily. Please note that you have to set up the eMap for monitoring in advance. ] Camera Control Buttons provides the control buttons that allow you to control the selected camera. Buttons / Functions Talk On/Off. Click to enable/disable the speaker function of the connected - TRENDnet TV-IP422WN | User's Guide - Page 68
5.2.3 Manage the Cameras Before adding the cameras, please setup the recording setting first. „ Configure Recording Settings 1. Click the button and then select Record Setting. 2. Default path is C:\, click Browse and select the desire directory then click Save to complete the configuration. To - TRENDnet TV-IP422WN | User's Guide - Page 69
„ Add a Camera 1. Click the button and select Device Setting to display the Device Setting window. 2. Click New. - 68 - - TRENDnet TV-IP422WN | User's Guide - Page 70
3. Click on Device Search, all cameras that's connected to your network would appear. 4. Select the camera you would like to add and then click Add. - 69 - - TRENDnet TV-IP422WN | User's Guide - Page 71
will display on the screen. It will auto detect the IP address/port number and display the stream type of the camera. Please type in the correct user name and password, then select Preview to view live image. 6. To setup recording style, select Yes on Record option. These four recording types will - TRENDnet TV-IP422WN | User's Guide - Page 72
schedule and select the time to record. Click on Save when finish. Motion: Record video by Motion Detection. Motion detection recording required to setup a motion detection area. If you are adding a new camera, you must save the camera information first before setup the motion detection area. - 71 - - TRENDnet TV-IP422WN | User's Guide - Page 73
To use motion detection record, please enable the detection areas first. Click on Motion detection area to setup Enable motion detection windows, set up the senstivity and click on Save. - 72 - - TRENDnet TV-IP422WN | User's Guide - Page 74
Motion by Schedule: same requirement as Motion & Schedule recording. Digital Input: Recording triggered when there I/O port is triggered. After all recording methods are configured, click Save to apply the settings. 7. Camera list will appear with recording type notification. - 73 - - TRENDnet TV-IP422WN | User's Guide - Page 75
"x" on the Device Setting windows to return to the main windows. The cameras will display here. NOTE Divx/Xvid codec is required for viewing the image of camera. If the image cannot be displayed in the Live View/Preview window normally, click the following path to download and install the required - TRENDnet TV-IP422WN | User's Guide - Page 76
„ Edit / Delete a Camera 1. To edit a camera: From the Device Setting window, highlight the camera you would like to edit then click on Modify button. 2. To delete a camera: select the desired one and then click Remove. Click Yes to confirm. - 75 - - TRENDnet TV-IP422WN | User's Guide - Page 77
icon ( ) on the top‐right corner of the window provides you with the options to connect/disconnect the camera, select a camera to be displayed in the window, capture a still image of the camera live video, or switch to eMap mode. Click the Information icon to pop up the shortcut menu and select - TRENDnet TV-IP422WN | User's Guide - Page 78
„ Playback the Recorded Files 1. Click the button to display the Playback window. 2. On the Playback window, select the camera and setup the begin/end date and begin/end time, then click Search. The search result will be displayed in the Record File list. - 77 - - TRENDnet TV-IP422WN | User's Guide - Page 79
3. To playback the video clip, select the desired file and click Play. - 78 - - TRENDnet TV-IP422WN | User's Guide - Page 80
5.2.4 eMap Setup & Camera Status „ Manage eMap Click the button and select View Setting to manage eMap. eMap refers to the geography and device scope in the SecurView Pro, which visually presents the devices in your security system. It uses a background of the area (e.g. a picture or a map) as the - TRENDnet TV-IP422WN | User's Guide - Page 81
2. Enter an eMap name. 3. Click Browse to select a Picture File from your computer. Picture will display in the Preview window. - 80 - - TRENDnet TV-IP422WN | User's Guide - Page 82
4. Click Save and click OK to apply the settings. 5. Click Camera Location to assign the camera location. - 81 - - TRENDnet TV-IP422WN | User's Guide - Page 83
6. The following screen appears. 7. Select the camera from the list and then click the position on the map. The camera icon will be displayed on map. - 82 - - TRENDnet TV-IP422WN | User's Guide - Page 84
8. Click Save when complete. To modify/remove an eMap 1. To edit the eMap: In the eMap List, select the map name from eMap list, and click Modify. The map's information will display on the preview windows. After changes the setting information, click Save to save the setting. - 83 - - TRENDnet TV-IP422WN | User's Guide - Page 85
2. To delete the eMap: In the eMap List, select the desired one and click Remove. The selected map will be removed from the list. „ View eMap a. Click the button and select eMap View. - 84 - - TRENDnet TV-IP422WN | User's Guide - Page 86
b. Select the map from the eMap Name list. „ Camera Status Click the camera icon , the camera Live Monitor window will display live image on that camera. - 85 - - TRENDnet TV-IP422WN | User's Guide - Page 87
5.2.5 System Info „ Account Click the System button and select Account to change the administrator password of the system. Enter the Current password, and then enter the new password twice (in the Type new password and Retype password boxes). Then click Save. - 86 - - TRENDnet TV-IP422WN | User's Guide - Page 88
„ Version Click the System button and select Version to view the current firmware version of the system. „ System Setting Click the System button and select System Setting. Auto Scan period can be set from 30 seconds to 100 seconds. - 87 - - TRENDnet TV-IP422WN | User's Guide - Page 89
5.2.6 Event Settings „ Setting up Event Server Click the button and select Event Server to configure the SMTP settings for email notification use. - 88 - - TRENDnet TV-IP422WN | User's Guide - Page 90
Mode: Select None or SMTP according to the mail server configuration. z Sender User Name: Enter the user name to login the mail server. z Sender Password: Enter the password to login the mail server. z Port Number: Enter the port number used for the email server. z SSL: If the mail server requires - TRENDnet TV-IP422WN | User's Guide - Page 91
the Address Book of the camera. The user will receive a real‐time notification from the system while triggering out. 1. On the Address Book window, click New. 2. In the Address Book Information field, enter the Name and Email of the user. 3. When completed, click Save. The user will be displayed in - TRENDnet TV-IP422WN | User's Guide - Page 92
click Save when completed. 5. To delete the user: In the Address Book List, select the desired user and click Remove. The selected user will be removed from the list. „ Configuring Event Trigger Click the button and select Event Trigger to configure the trigger out function of the camera. - 91 - - TRENDnet TV-IP422WN | User's Guide - Page 93
1. On the Event Trigger window, select the desired camera from the Camera List. 2. Do one of the following: z SMTP: Select this option and enter the Subject and Message, the system will send an email message to the selected user(s) in the Address Book List. z Play Sound: Select this option select a - TRENDnet TV-IP422WN | User's Guide - Page 94
from any of the listed DDNS providers is required prior to this operation. 6.1 Configure DDNS on your Camera 1. Go to Camera's DDNS Setting page, click Enable to activate the feature. Then select a DDNS provider from the list. 2. Enter your DDNS's the Host Name, User Name and Password. - 93 - - TRENDnet TV-IP422WN | User's Guide - Page 95
3. In the Port Number section, assign an HTTP port of the camera. The default HTTP Port on the camera is 80. The example shows above is using port number 9000. 4. Open another web browser and go to your Router's Web Configuration page. (In the example, TRENDnet's TEW‐651BR Wireless N router is used) - TRENDnet TV-IP422WN | User's Guide - Page 96
used on remote side to access to your Camera. LAN Server: The local IP address of your Camera. Then click Add to add the application. * Please refer to your router's user's manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The - TRENDnet TV-IP422WN | User's Guide - Page 97
web browser and enter your DDNS domain and camera's port number. http://yourDomainName:PortNumber 7. Camera's login page will appear. 6.2 Configure DDNS on your router 1. Go to Camera's DDNS Æ Ports Number section, assign a HTTP port for your camera and click Apply. 2. Login to your router's web - TRENDnet TV-IP422WN | User's Guide - Page 98
3. Find the Dynamic DNS configuration section. 4. Enable DDNS, fill out the following information and then click Apply. - 97 - - TRENDnet TV-IP422WN | User's Guide - Page 99
on your Camera. Public Port: The port used on remote side to access to your Camera. LAN Server: The local IP address of your Camera. Click Add to add the application. * Please refer to your router's user's manual for detail Virtual Server setting. Some router might use Port Forwarding or Special - TRENDnet TV-IP422WN | User's Guide - Page 100
APPENDIX A.1 Specification Camera General Pan & Tilt Image & Video Audio Hardware codec: PCM/AMR IEEE 802.3u 10/100Mbps Fast Ethernet, Auto‐MDIX Power, Link Restore to factory default Push button for Wi‐Fi Protected Setup 10 watts max. 12 V DC, 1.5 A external power adapter (3.5 mm plug) 115 x 110 - TRENDnet TV-IP422WN | User's Guide - Page 101
Run SecurView Pro SecurView Pro Network Protocols Wireless supports up to 32 cameras Record/Playback/Motion Detection TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP Restore Settings Image 1~11 (FCC), 1~13 (ETSI) Remote management supported Save/ - TRENDnet TV-IP422WN | User's Guide - Page 102
rate: 1~ 30 fps Compression: 5 levels Recording type: continuous, schedule or motion detection with software 3 profiles simultaneously HTTP port: 80 (default) 3x Yes Synchronize with NTP server or set time/date manually SMTP mail supported up to 2 accounts with software 100 entries (max.) - 101 - - TRENDnet TV-IP422WN | User's Guide - Page 103
association with programming scripts for developing applications for motion detection, event triggering, alarm notification via e‐mail, and a variety of external control functions. The GPIO connectors are located on the rear panel of the camera, which provide the interface of connecting the sensor - TRENDnet TV-IP422WN | User's Guide - Page 104
, allowing a maximum of 256 characters. Address Resolution Protocol. ARP is a protocol that resides at the TCP/IP Internet layer that delivers data on the same network by translating an IP address to a physical address. Audio Video Interleave, it is a Windows platform audio and video file type - TRENDnet TV-IP422WN | User's Guide - Page 105
administrators because the software keeps track of IP addresses rather than requiring an administrator to manage the task. A new computer can be added to a network without the hassle of manually assigning it a unique IP address. DHCP allows the specification for the service provided by a router - TRENDnet TV-IP422WN | User's Guide - Page 106
those that do not meet the specified security criteria. A gateway links computers that use different data formats together. Groups consist of several user machines that have similar characteristics such as being in the same department. Short for hexadecimal refers to the base‐16 number system, which - TRENDnet TV-IP422WN | User's Guide - Page 107
Intranet Internet Internet address IP IP address ISP This is a private network, inside an organization or company that uses the same software you will find on service provider controls the IP address of any device it connects to the Internet. The IP addresses in your network must conform to IP - TRENDnet TV-IP422WN | User's Guide - Page 108
for writing programs that can be safely downloaded to your computer through the Internet without single building or group of buildings. MJPEG (Motion JPEG) composes a moving image by storing unique IP address. But the addresses may not be valid outside your network. NAT solves the problem. When - TRENDnet TV-IP422WN | User's Guide - Page 109
requests are forwarded to the Internet under the router's IP address. NAT distributes the responses to the proper IP addresses within is primarily used to troubleshoot Internet connections. Point‐to‐Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to - TRENDnet TV-IP422WN | User's Guide - Page 110
IP) suite, forwards packets from one network to another using the same network protocol. RJ‐45 connector is used for Ethernet cable connections. A router is the network software video and audio files in real time for Internet applications. RTSP (Real‐time Streaming Protocol) is the standard used to - TRENDnet TV-IP422WN | User's Guide - Page 111
to the medium. Transceivers also can be used on 10BASE‐2 or 10BASE‐T networks to attach devices with AUI ports. The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite The USERNAME is the unique name assigned to each person who has access to the LAN. It is - TRENDnet TV-IP422WN | User's Guide - Page 112
used as the basic security protocol in Wi‐Fi networks, which secures data transmissions using 64‐bit or 128‐bit encryption. Windows is a graphical user interface for workstations that use DOS. WPA (Wi‐Fi Protected Access ) is used to improve the security of Wi‐Fi networks, replacing the current - TRENDnet TV-IP422WN | User's Guide - Page 113
purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do - TRENDnet TV-IP422WN | User's Guide - Page 114
service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada - TRENDnet TV-IP422WN | User's Guide - Page 115
PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET - TRENDnet TV-IP422WN | User's Guide - Page 116
.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please - TRENDnet TV-IP422WN | User's Guide - Page 117
- 116 -
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
 |
 |
