TRENDnet TV-IP422WN Quick Installation Guide
TRENDnet TV-IP422WN Manual
 |
UPC - 710931303773
View all TRENDnet TV-IP422WN manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TV-IP422WN manual content summary:
- TRENDnet TV-IP422WN | Quick Installation Guide - Page 1
Quick Installation Guide TV-IP422WN 1.01 - TRENDnet TV-IP422WN | Quick Installation Guide - Page 2
Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 3. Configure the IP Camera 3 Troubleshooting 7 Wireless Tips 8 Version 03.09.2011 - TRENDnet TV-IP422WN | Quick Installation Guide - Page 3
ŸTV-IP422WN ŸCD-ROM (Utility and User's Guide) ŸMulti-Language Quick Installation Guide Ÿ Wireless Router (e.g. TEW-691GR) or Access Point (e.g. TEW-690AP) ŸAn available DHCP Server - routers usually have a built-in DHCP server SecurView Pro Requirements 1-8 Cameras 9-32 Cameras Supported - TRENDnet TV-IP422WN | Quick Installation Guide - Page 4
Hardware Installation 1. Attach the antenna to the IP Camera. 2. Connect the provided network cable from one of your Router's network portsto the Ethernet port on the IP Camera. 3. Connect the Power Adapter to the IP Camera and then to a power outlet. 4. Connect an external speaker to the IP Camera - TRENDnet TV-IP422WN | Quick Installation Guide - Page 5
CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click IPSetup. 4. Follow the Installation Wizard instructions. 5. Once installation is complete click Close. 6. Click the Start (Windows XP) or Windows (Windows 7) icon. 7. Go to Programs Ž TRENDnet Ž IP Setup | and click IP Setup. 3 - TRENDnet TV-IP422WN | Quick Installation Guide - Page 6
the MAC address on your IP camera. The MAC address is listed on the bottom of the TV-IP422WN. Click Search if no cameras are detected. 9. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin 10. Right click on the information bar and click Install This - TRENDnet TV-IP422WN | Quick Installation Guide - Page 7
cable and unplug the power. Then plug the power back in. 15. Verify the Power (Amber) and Link (Green/Blinking) LEDs are on. Note: The TV-IP422WN will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. 5 - TRENDnet TV-IP422WN | Quick Installation Guide - Page 8
IP camera. Your configuration is complete 1. For detailed information regarding the TV-IP422WN's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. 2. If you would like to use SecurView Pro software - TRENDnet TV-IP422WN | Quick Installation Guide - Page 9
the IP Camera. If you do not have a DHCP server on your network, the default IP address is 192.168.10.30. The default administrator ID and password is admin. If you still encounter problems or have any questions regarding the TV-IP422WN, please contact TRENDnet's Technical Support Department - TRENDnet TV-IP422WN | Quick Installation Guide - Page 10
setting up the SSID, encryption type and encryption key/passphrase, please make a note of them for future reference. You will need this information to connect your wireless computers to the wireless router/access point. Change the channel Most wireless access points and routers are defaulted to - TRENDnet TV-IP422WN | Quick Installation Guide - Page 11
signals. Move the phone's base station as far away as possible from your wireless devices. If you are still experiencing low or no signal consider repositioning the wireless devices or installing additional access points. The use of higher gain antennas may also provide the necessary coverage - TRENDnet TV-IP422WN | Quick Installation Guide - Page 12
- TRENDnet TV-IP422WN | Quick Installation Guide - Page 13
die freie Software „Linux „mtd" (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in Linux Version 2.4.0-test 3 v. der Software für mindestens drei Jahre auf unserer Homepage www.trendnet.com im Downloadbereich (http://trendnet.com/langen/downloads/list_gpl. - TRENDnet TV-IP422WN | Quick Installation Guide - Page 14
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos de cada licença. Os códigos fonte estão disponíveis para download no site da TRENDnet (http://trendnet.com/langen/downloads/list_gpl.asp) por pelo menos três anos da data de embarque - TRENDnet TV-IP422WN | Quick Installation Guide - Page 15
- TRENDnet TV-IP422WN | Quick Installation Guide - Page 16
Copyright ©2011, All Rights Reserved. TRENDnet.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
TV-IP422WN
1.01
Quick Installation Guide