Toshiba 37RV525RZ Owners Manual

Toshiba 37RV525RZ Manual

Toshiba 37RV525RZ manual content summary:

  • Toshiba 37RV525RZ | Owners Manual - Page 1
    40RV52RZ 40RV525R 40RV525RZ 46RV525R 46RV525RZ For an overview of steps for setting up your new TV, see page10. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast, a High Definition digital cable program
  • Toshiba 37RV525RZ | Owners Manual - Page 2
    children. Wall Mounting: If you decide to wall mount your flat panel display, always: • Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). • Follow all instructions supplied by the display and wall mount manufacturers
  • Toshiba 37RV525RZ | Owners Manual - Page 3
    , take the following precautions: • ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If
  • Toshiba 37RV525RZ | Owners Manual - Page 4
    TOSHIBA TV, follow these recommendations and precautions: 32) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction. 33) Always unplug the TV before cleaning. Gently wipe the display panel
  • Toshiba 37RV525RZ | Owners Manual - Page 5
    attaching the pedestal stand to avoid damage to the LCD panel. 2) Place the TV on a sturdy, level surface that can support the weight of the TV. 3) Be sure to secure the TV to a wall, pillar, surface, or other immovable structure. ( item 23, page 4). To Display your LCD TV using a Wall Bracket: If
  • Toshiba 37RV525RZ | Owners Manual - Page 6
    to the LCD panel. 2) Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand. 3) Once you have removed all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV. 32" TV VESA Mounting Pattern 40" TV VESA Mounting Pattern
  • Toshiba 37RV525RZ | Owners Manual - Page 7
    approved by Toshiba could void the user's authority to operate this equipment. ENERGY STAR® User Information ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR requirements. Changing Picture Settings may increase energy consumption, possibly
  • Toshiba 37RV525RZ | Owners Manual - Page 8
    your other devices 24 Remote control codes 25 Chapter 4: Menu layout and navigation 27 Main menu layout 27 Setup/Installation menu layout 28 Navigating the menu system 28 Chapter 5: Setting up your TV 29 Setting the Energy Saving Mode 29 Selecting the menu language 29 TOSHIBA Logo LED 29
  • Toshiba 37RV525RZ | Owners Manual - Page 9
    your new Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Three HDMI™ digital, high-definition multimedia interfaces 1080p input support ( page 16
  • Toshiba 37RV525RZ | Owners Manual - Page 10
    ). 9 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on
  • Toshiba 37RV525RZ | Owners Manual - Page 11
    Service port - For service use only. Used for updating the television's firmware. 5無 POWER - Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel
  • Toshiba 37RV525RZ | Owners Manual - Page 12
    an audio amplifier. 5無 ANT/CABLE - Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 6無 Digital Audio OUT - Optical audio output in Dolby Digital or PCM (pulse-code modulation) format for connecting an external
  • Toshiba 37RV525RZ | Owners Manual - Page 13
    page 19). Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable. Optical audio cable Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV's DIGITAL AUDIO OUT terminal ( page
  • Toshiba 37RV525RZ | Owners Manual - Page 14
    is set to). Use the Cable box controls to change channels. To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* To view the camcorder video: Select the VIDEO 2 video input source on the TV.* ** To select the video input source, press INPUT on the remote control ( page
  • Toshiba 37RV525RZ | Owners Manual - Page 15
    CH 4 OUT L R IN from ANT OUT to TV From satellite dish Y PB PR AUDIO OUT L Satellite COMPONENT VIDEO S-VIDEO VIDEO R IN OUT OUT Satellite receiver with component video You will need: • coaxial cables • standard A/V cables −− For better picture performance, if your VCR has S-video, use
  • Toshiba 37RV525RZ | Owners Manual - Page 16
    audio cables are not required (see illustration). −− See "Setting the HDMI™ audio mode" ( page 34). TV back panel HDMI device To view the HDMI device video: Select the HDMI 1, HDMI 2 or HDMI 3 video input source on the TV.* ** To select the video input source, press INPUT on the remote control
  • Toshiba 37RV525RZ | Owners Manual - Page 17
    basic functions of connected audio/video devices using the TV's remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see pages 51. TV back panel Audio receiver Playback device (REGZA-LINK HD DVD player,etc.) Playback
  • Toshiba 37RV525RZ | Owners Manual - Page 18
    standard audio cables Analog audio amplifier LINE IN LR To control the audio: 1無 Turn on the TV and the digital audio device. 2無 Press on the TV's remote control and open the Audio menu. 3無 Highlight Audio Setup and press . Audio Digital Audio Selector Audio Settings Advanced Audio Settings Audio
  • Toshiba 37RV525RZ | Owners Manual - Page 19
    panel Computer PC audio output PC audio cable Conversion adapter (if necessary) • To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and SXGA signal formats. For detailed signal specifications
  • Toshiba 37RV525RZ | Owners Manual - Page 20
    Preparing the remote control for use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is
  • Toshiba 37RV525RZ | Owners Manual - Page 21
    (Also see / .) 16無 ENTER activates highlighted items in the main menu system. 17無 MENU accesses the main TV menu system ( pages 27 and 28). 18無 EXIT closes on-screen menus. 19無 MODE SELECT switch switches between TV, CABLE/ SAT, AUX 1, and AUX 2 modes ( page 22). Set to "TV" to control the TV. 21
  • Toshiba 37RV525RZ | Owners Manual - Page 22
    or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) ( pages 24-26). To use your TV remote control to operate a: • Cable converter box or satellite receiver, set the MODE
  • Toshiba 37RV525RZ | Owners Manual - Page 23
    TV. REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) AUX 1 (VCR) AUX 2 (DVD or HTIB) POWER Power Power Power Power Power SLEEP Sleep timer TV TV TV TV PIC SIZE Picture size TV TV TV TV FREEZE FREEZE TV TV TV TV 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit
  • Toshiba 37RV525RZ | Owners Manual - Page 24
    receiver), AUX 1 (for a VCR or TV/VCR combo), or AUX 2 (for a DVD player or HTIB [home theater in a box]). 3無 While holding down , press the Channel Number buttons to enter the 3-digit code for your device. 4無 To test the code, turn on the device, point the remote control at it, and press . See
  • Toshiba 37RV525RZ | Owners Manual - Page 25
    remote control Remote control codes In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device's remote control. Cable Technics Techwood Toshiba Yamaha Zenith
  • Toshiba 37RV525RZ | Owners Manual - Page 26
    Chapter 3: Using the remote control Audiovox Panasonic RCA 094, 095 024, 096, , 061 Sanyo Scott Sears Sharp Shintom Signature Signature 2000 Singer Sony STS Sylvania Symphonic Tandy Tashiko Tatung Teac Technics Teknika Toshiba 007, 009, 016, 054, 064, 068, 071, 075, 079, 085 008, 011, 017, 028,
  • Toshiba 37RV525RZ | Owners Manual - Page 27
    system. To open the main menus (illustrated below), press on the remote control or TV control panel. Icon Video Audio Preferences Locks Setup Item Mode Picture Settings Noise Reduction Game Mode Theater Settings Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup CC Selector
  • Toshiba 37RV525RZ | Owners Manual - Page 28
    / Digital  Pacific / Alaska / Hawaii / Atlantic / Newfoundland / Eastern / Central / Mountain  [Opens the Signal Meter menu] System Status System Information  [Opens the System Information screen] Navigating the menu system You can use the buttons on the remote control or TV control panel to
  • Toshiba 37RV525RZ | Owners Manual - Page 29
    and press . Initial Setup Energy Saving Mode To use this TV for displaying in a retail showroom, please select [Retail]. [Home] mode is recommended for normal home use. (ENERGY STAR® qualified R ) Retail Home TOSHIBA Logo LED You can select TOSHIBA Logo LED either On or Off. 1無 Press and open
  • Toshiba 37RV525RZ | Owners Manual - Page 30
    Chapter 5: Setting up your TV Programming channels into the TV's channel memory When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV's channel memory. Follow the steps below to program channels into the TV's channel memory.
  • Toshiba 37RV525RZ | Owners Manual - Page 31
    want to add, and then press to check the box. To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash ( ) on the remote control to enter the channel number (for example, 56-1). If the channel is found, the number will be added to the list and the box will be
  • Toshiba 37RV525RZ | Owners Manual - Page 32
    1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See "Connecting an HDMI or DVI device to the HDMI input" ( page 16). 4無 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard. 5無 The highlighted
  • Toshiba 37RV525RZ | Owners Manual - Page 33
    through the menu bar to select Factory Defaults. 5無 Enter your PIN code (or 0000 if no PIN code has been set). 6無 Highlight Yes and press . The TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process
  • Toshiba 37RV525RZ | Owners Manual - Page 34
    to change the input; or c) Repeatedly press on the remote control or TV control panel to change the input. The current signal source displays in the top right corner of the Input Selection screen. Input Selection 0 ANT/CABLE 1 Video 1 2 Video 2 3 ColorStream HD1 4 ColorStream HD2 5 HDMI 1 REGZA
  • Toshiba 37RV525RZ | Owners Manual - Page 35
    screen and skipped over when you press on the remote control. specific device). The screen below right is an example of how you could label the inputs if you connected a VCR to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD1, a DTV set-top box to HDMI 1, and a satellite/DSS set
  • Toshiba 37RV525RZ | Owners Manual - Page 36
    the setting you prefer: either On, or Off. Note: History List will be cleared every time the TV is powered off. 4無 Press  to highlight ANT/CABLE List, remote control. • Press  to surf backward through the previously tuned 32 channels in the History list, the channels in the ANT/ CABLE channel
  • Toshiba 37RV525RZ | Owners Manual - Page 37
    manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can still be tuned by / , if available Digital Only digital channels can be tuned Note: Digital mode will be most useful after analog channels are shut down by the government in 2009. To set
  • Toshiba 37RV525RZ | Owners Manual - Page 38
    . Select the picture size that displays the current program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1無 Press on the remote control. 2無 While the Picture Size screen is open
  • Toshiba 37RV525RZ | Owners Manual - Page 39
    Size in the Theater Settings menu. 2無 Press  or  to select the desired picture size setting. 3無 Highlight Done and press . Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be "grayed out" in the Picture Size screen). Using these functions to
  • Toshiba 37RV525RZ | Owners Manual - Page 40
    graphics. Note: ••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p). ••Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy. Dot by Dot (for
  • Toshiba 37RV525RZ | Owners Manual - Page 41
    defaults, highlight Reset and press . To set the Cinema Mode to Video: Select Video in step 3 above. Using the FREEZE feature To use the FREEZE feature: 1無 When viewing the TV, press to make the picture a still picture. 2無 To return to the moving picture, press again (or any other button
  • Toshiba 37RV525RZ | Owners Manual - Page 42
    selected is not closed captioned, no captions will display on-screen. • To view text: Highlight T1, T2, T3, or T4. Note: If text is not available in your area, a black rectangle may appear on screen. If this happens, set the Base CC Mode to Off. • To turn off the closed caption mode: Select Off in
  • Toshiba 37RV525RZ | Owners Manual - Page 43
    select the desired service. 4無 Press . Adjusting the audio Muting the sound Press on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press , the mute mode will change in the following order: 1/2 Mute Mute Volume If the closed caption mode is set to Off
  • Toshiba 37RV525RZ | Owners Manual - Page 44
    Audio Selector and press . Audio Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup 3無 Press  or  to select Audio, and then press  or  to select the desired service. 4無 Press . Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to output
  • Toshiba 37RV525RZ | Owners Manual - Page 45
    highlight the Locks menu icon. 2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code and press . 4無 Press  to highlight New PIN Code and press . 5無 Press the Number buttons to enter a new four- digit code. Reenter the PIN code to confirm it. 6無 Press . The new PIN
  • Toshiba 37RV525RZ | Owners Manual - Page 46
    Chapter 6: Using the TV's features To block and unblock TV programs and movies: 1無 Press and highlight the Locks menu icon. 2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code and press . 4無 Press  to highlight Enable Rating Blocking. 5無 Press  and  to select On
  • Toshiba 37RV525RZ | Owners Manual - Page 47
    Block feature, you can block specific channels. You will not be able to tune blocked channels unless you unlock them. To block channels: 1無 Press and highlight the Locks menu icon. 2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code and press ( page 45). 4無 Press
  • Toshiba 37RV525RZ | Owners Manual - Page 48
    (30-120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device. To set the GameTimer®: 1無 From the Locks menu, press  to display the PIN code entering screen. 2無 Enter your four-digit PIN code and press . 3無 Press  to highlight
  • Toshiba 37RV525RZ | Owners Manual - Page 49
    , for example). When the control panel lock is On, none of the controls on the TV control panel will operate except POWER. To lock the control panel: 1無 Press and highlight the Locks menu icon. 2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code and press . 4無 Press
  • Toshiba 37RV525RZ | Owners Manual - Page 50
    will display on-screen when there is one minute remaining on the sleep timer. To cancel the sleep timer: Repeatedly press until it is set to 0 minute. Using REGZA-LINK® This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote
  • Toshiba 37RV525RZ | Owners Manual - Page 51
    See page 34 for details. VOLUME and MUTE controls of Audio Receiver With your TV's remote control, you can adjust or mute the sound volume of the Audio Receiver. First, set the MODE SELECT switch on the remote control to TV. • adjust the volume level. • turns off the sound. Note: ••To use this
  • Toshiba 37RV525RZ | Owners Manual - Page 52
    remote control. The following information will display (if applicable): • Current input (ANT/CABLE, VIDEO 1, etc.) • If ANT/CABLE is the current input, either "CABLE" (for cable TV) or "ANT" (for over-the-air broadcasts). • Channel number (if in ANT/CABLE mode) • Channel label (if set) • Digital
  • Toshiba 37RV525RZ | Owners Manual - Page 53
    The static gamma feature allows you to adjust the levels of black in the picture. To adjust the static gamma settings: 1無 Press and open the Video menu. 2無 Highlight Picture Settings and press . 3無 Highlight Advanced Picture Settings and press . • In the Static Gamma field, press  or  to adjust
  • Toshiba 37RV525RZ | Owners Manual - Page 54
    The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To change the CableClear settings: 1無 Press and
  • Toshiba 37RV525RZ | Owners Manual - Page 55
    TV in STEREO mode ( "Selecting stereo/SAP broadcasts" on page 42). 2無 Press and open the Audio menu. 3無 Highlight Advanced Audio Settings and press . 4無 Press  or  to highlight the QSound feature, and then press  or  to turn the QSound effect On or Off. 5無 To save the new settings, highlight
  • Toshiba 37RV525RZ | Owners Manual - Page 56
    procedure ( page 33). TV will not turn on •• Make sure the power cord is plugged in, and then press . •• The remote control batteries may be dead. Replace the batteries or try the control panel buttons. Picture problems General picture problems •• Check the antenna/cable connections ( Chapter
  • Toshiba 37RV525RZ | Owners Manual - Page 57
    turn off your TV and unplug the power cord, then plug and turn on again. •• If several devices are connected, REGZA-LINK feature may not operate properly. •• Read the instruction manual furnished with the connected REGZA-LINK device. HDMI problems For HDMI cables •• Make sure to use cables
  • Toshiba 37RV525RZ | Owners Manual - Page 58
    (17.8 kg) 40RV525RZ/40RV52RZ:39.3 lbs (17.8 kg) 46RV525R/46RV525RZ: 50.2 lbs (22.8 kg) Operating conditions Temperature: 32ºF - 95ºF (0ºC - 35ºC) Humidity: 20 - 80% (no moisture condensation) Supplied Accessories • Remote control with two size "AAA" batteries • Owner's manual (this book) • Cleaning
  • Toshiba 37RV525RZ | Owners Manual - Page 59
    PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV. Format VGA VGA SVGA XGA WXGA SXGA Resolution 640 × 400 640 × 480 800 × 600 1024
  • Toshiba 37RV525RZ | Owners Manual - Page 60
    been modified or had the serial number removed, altered, defaced, or rendered illegible. How to Obtain Warranty Service If, after following all of the operating instructions in this manual and reviewing the section entitled "Troubleshooting," you find that service is needed: (1) To find the nearest
  • Toshiba 37RV525RZ | Owners Manual - Page 61
    Canadian Warranty for Toshiba Brand Flat Panel Televisions Toshiba of Canada problems caused by inadequate antenna systems are your responsibility. (5) Warranties extend only to material defects in materials or workmanship as limited above, and do not extend to: a. Service, repairs or replacement
  • Toshiba 37RV525RZ | Owners Manual - Page 62
    OF SALE DISPLAY, ETC.). YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE. THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS REQUIRED, IN PART OR IN WHOLE
  • Toshiba 37RV525RZ | Owners Manual - Page 63
    warranty and deemed not to form part of the warranty. The remaining provisions Services If, after following all of the operating instructions in this manual and checking the "Troubleshooting" section, you find that service is needed: (1) To find the nearest ASP, visit TCL's web site at www. toshiba
  • Toshiba 37RV525RZ | Owners Manual - Page 64
    : 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA - TEL: (905) 470-5400 SERVICE CENTERS: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

For an overview of steps for setting up your new TV, see page10.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition
TV broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact
your TV antenna installer, cable provider, or satellite provider.
© 2009 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
HDA51B4002I
Owner’s Manual
Integrated High Definition
HIGH
-DEFINITION TELEVISION
LCD Television
32RV525RZ
37RV52R
37RV52RZ
37RV525RZ
40RV52R
40RV52RZ
40RV525R
40RV525RZ
46RV525R
46RV525RZ