Toshiba X100U User Manual
Toshiba X100U - TLP XGA LCD Projector Manual
 |
UPC - 883974142477
View all Toshiba X100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba X100U manual content summary:
- Toshiba X100U | User Manual - Page 1
Others Maintenance Operations Preparations Before Using TLP-X100 (XGA) TLP-WX100 (WXGA) DATA PROJECTOR OWNER'S MANUAL In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Serial No. Retain this information for future reference. - Toshiba X100U | User Manual - Page 2
is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the : TLP-X100 / TLP-WX100 USA only TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TLP-X100 / TLP-WX100 - Toshiba X100U | User Manual - Page 3
TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. 3. Source of Light Do not look into the lens while the lamp is on. The strong - Toshiba X100U | User Manual - Page 4
Do not place or keep the projector within the reach of the children the product. 17. Accessories Do not place this product Service Unplug this product from the wall outlet and take the product to qualified service instructions. Adjust only those controls that are covered by the operating instructions - Toshiba X100U | User Manual - Page 5
service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Only the replacement of the lamp should be made by users it. The projector may fall down - Toshiba X100U | User Manual - Page 6
replacement be done at the time of replacing a lamp. (Ask a dealer where the unit was purchased or your nearby service station about an air filter for replacement.) EXEMPTION CLAUSES • Toshiba other problems. • Toshiba Corporation Notational Conventions Used in This Manual • References to pages - Toshiba X100U | User Manual - Page 7
Before Using SAFETY PRECAUTIONS 2 IMPORTANT SAFETY INSTRUCTIONS 4 POWER SUPPLY INFORMATION 9 IMPORTANT PRECAUTIONS Maintenance About lamp 43 Lamp replacement 44 Air filter cleaning 47 Lens and main unit cleaning 48 12 Others Trouble indications 49 Troubleshooting 50 Specifications - Toshiba X100U | User Manual - Page 8
it from the Adobe Systems website. Viewing the manual Run the CD-ROM and double-click on Start.pdf. Acrobat® Reader® Operates the projector. p.16 (2) Zooming lever : Adjusts screen size. p.27 (3) Focusing lever : Adjusts screen focus. p.27 (4) Lamp cover : Remove to replace lamp. p. - Toshiba X100U | User Manual - Page 9
p.25 : Lights when internal temperature is too high. p.49 : Displays lamp mode. p.49 : Menu selections and adjustments, volume control, Keystone adjustment, Deletes one character. 6 [6] Note • For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒ ; ENTER - Toshiba X100U | User Manual - Page 10
minus ends of the batteries properly. Approx.15° Approx.5m Two batteries (R03, SIZE AAA) are used. 3 Replace the battery cover. When operating the remote control from behind the projector, the infrared signal is reflected on the projecting surface and may travel a shorter distance to reach the - Toshiba X100U | User Manual - Page 11
4 different styles instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean and replace the lamp in a high location by yourself may cause you to fall, resulting in injury. • If you wish to mount the projector no keystone adjustment.) TLP-X100 Screen As seen from - Toshiba X100U | User Manual - Page 12
manual of the device you are connecting to the projector. • Some computers cannot be used with or connected to this projector. Check for an RGB output terminal, supported mean items can be exchanged.) Video recorder, DVD player, etc. Computer DVD video recorder, etc. To audio output White (L)/ - Toshiba X100U | User Manual - Page 13
place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the unit. Doing so could result in injury problem with unplugging the power cord in this state. Control panel Remote control 3 Replace the lens cap. After use, replace the lens cap. Note • The projector - Toshiba X100U | User Manual - Page 14
the instructions in "Turning the power on" p.24 . 2 Select the language and the lamp power (When using the first time). When the projector is via the Display setting menu p.37 and Lamp power via the Default setting 1 menu p.40 . • This owner's manual assumes that English has been selected. 3 - Toshiba X100U | User Manual - Page 15
could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on conditions of use.) • Although this projector supports a wide range of RGB signals p.53 , any resolutions not supported by this projector (XGA for X100, WXGA for WX100) will be expanded or - Toshiba X100U | User Manual - Page 16
When you want to project the images of another projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Press 's SCREEN SIZE button. Pressing the button switches in turn as follows: X100 : Normal/Full/Thru/Wide WX100 : Normal/Full/Thru/4:3 zoom Notes - Toshiba X100U | User Manual - Page 17
also release the freeze. • Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you How to operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of - Toshiba X100U | User Manual - Page 18
the control panel (main unit side) and remote control. ■ Setup using the Setting display The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button Display the Setting display menu. 2. Select a Category Select a category by using - Toshiba X100U | User Manual - Page 19
projected images shift vertically when the screen size setting is selected Wide for X100 (within the range of 1024 x 768) and 4:3 zoom for WX100 :Selection] [Enter: ] Icon Display icons as function guides On Off Start-up screen User logo Display start-up screen when power is turned on On - Toshiba X100U | User Manual - Page 20
center of the screen with a 16:9 aspect (X100) ratio by enlarging it to fit the width screen. Precaution • The projected image may differ depending on the type, color, and material screens. [Background] • TOSHIBA is set for [Logo] by factory setting. • If user's logo has been registered, - Toshiba X100U | User Manual - Page 21
(FCC). Due to the different broadcasting or signaling system, it may not operate correctly in other regions or countries where TV programs do not support closed captioning. • Closed Caption may not appear correctly depending on the signal conditions or the recording conditions of videotapes. • If - Toshiba X100U | User Manual - Page 22
] is set to [Low], consult with a dealer about getting replacement for lamp TLPLW21 (sold separately). 4: [Version] shows the version of the projector's internal control program. This version will be requested for customer service purposes. Note • The displayed information will not be refreshed if - Toshiba X100U | User Manual - Page 23
to the unit due to the difference in the connector shape or the lamp rate. CAUTION • If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it. • If the lamp should break, please handle with - Toshiba X100U | User Manual - Page 24
[Low] of the [Lamp power] respectively. • When the replacement time approaches, the message of "The lamp life is ending. Please change the lamp." is displayed every time the power is turned on. This display disappears when you press the button. Used Lamps This projector's lamps contain trace amounts - Toshiba X100U | User Manual - Page 25
maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean or replace the lamp in a high location by yourself may Others Trouble indications The indicator illuminates and a beep sound informs you of internal abnormalities. No power ⇒ Problem with projector (OFF) - Toshiba X100U | User Manual - Page 26
Troubleshooting If you think something is wrong, check the followings before contacting customer service. Please see "Trouble indications" p.49 as well. If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the outer lamp cover attached properly? - Toshiba X100U | User Manual - Page 27
Lens F=1.7 ~ 1.87 f=19.2 ~ 23.00 mm Lamp High-pressure mercury lamp (180 W) Projection screen size 30-300 inches Projection distance X100: 0.89 m ~ 10.93 m wx100: 0.94 product Replacement Lamp Model : TLPLW21 52 ■ List of supported signals (RGB signals) This projector supports the - Toshiba X100U | User Manual - Page 28
00 60.00 50.00 List of supported signals (Video, S-Video signals) Video signal (R) Color difference signal (PR) 2 Video signal (G) Luminance signal (Y) 3 Video signal (B) Color difference signal (PB) consecutively, wait for the response from the projector before sending the next command. - Toshiba X100U | User Manual - Page 29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Before Using
Preparations
Operations
Maintenance
Others
TLP-X100
(XGA)
TLP-WX100
(WXGA)
DATA PROJECTOR
OWNER’S MANUAL
In the spaces provided below, record the Model and Serial No. located at the bottom of
your
projector.
Model No.
Serial No.
Retain this information for future reference.