Uniden DXI5586-2 English Owners Manual

Uniden DXI5586-2 - DXI Cordless Phone Manual

Get Uniden DXI5586-2 - DXI Cordless Phone PDF manuals and user guides
UPC - 050633280096
View all Uniden DXI5586-2 manuals
Add to My Manuals
Save this manual to your list of manuals

Uniden DXI5586-2 manual content summary:

  • Uniden DXI5586-2 | English Owners Manual - Page 1
  • Uniden DXI5586-2 | English Owners Manual - Page 2
    3 Controls and Functions 4 Terms Used in this Manual 6 Accessibility 6 Installing the Phone 7 A. Choose the Best Location 7 B. Install the Rechargeable Battery Packs into the Handsets 8 C. Connect the Main Base and Charging Cradle, and Charge the Handsets 9 D. Mount the Main Base
  • Uniden DXI5586-2 | English Owners Manual - Page 3
    Congratulations on your purchase of the Uniden dual handset cordless telephone. This cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in
  • Uniden DXI5586-2 | English Owners Manual - Page 4
    ] CONTROLS AND FUNCTIONS 1. Handset antenna 2. Beltclip hole 3. Jack for optional headset 4. Handset ringer speaker 5. Handset battery compartment 6. Handset earpiece 7. LCD display 8. M /transfer key 16 19. Handset microphone 20. Handset charging contacts 17 18 19 20 www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 5
    Charging Cradle (for Second Handset) 21. Main base charging contacts 22. Find hs key 23. Charge/in use and VMWI (Voice Mail Waiting Indicator) LED 24. Telephone line jack 25. DC IN 9V jack 26. Charging contacts 27. Charge LED 28. DC IN 9V jack 26 27 www.uniden.com 28 CONTROLS AND FUNCTIONS
  • Uniden DXI5586-2 | English Owners Manual - Page 6
    NOT in use. The talk/flash key has not been pressed and there is no dial tone. • Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. • CID - Caller ID • CIDCW - Caller ID on Call Waiting Accessibility Uniden provides a customer service hotline for
  • Uniden DXI5586-2 | English Owners Manual - Page 7
    telephone company or a qualified installer. Avoid other cordless telephones • The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch). • The main base and each handset range and reception. www.uniden.com INSTALLING THE PHONE [ 7 ]
  • Uniden DXI5586-2 | English Owners Manual - Page 8
    . 3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. 4) Place the battery case cover back in the handset by sliding it upwards until it clicks into place. [ 8 ] INSTALLING THE PHONE www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 9
    good contact with the cradle's charging contacts. • Connect the AC adapter to a continuous power supply. • Place each cradle close to the AC outlet to avoid long extension cords. 4) Charge your handsets at least 15-20 hours before plugging the phone line. • Use only the supplied AD-314 AC adapter
  • Uniden DXI5586-2 | English Owners Manual - Page 10
    5) Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular [ 10 ] I N S T A L L I N G T H E P H O N E www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 11
    cord into the TEL LINE jack. 5) Plug the telephone line cord into the telephone outlet. 6) Align the mounting slots on the main base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. www.uniden.com I N S T A L L I N G T H E P H O N E [ 11 ] INSTALLING THE
  • Uniden DXI5586-2 | English Owners Manual - Page 12
    when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the main base and handset. • Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
  • Uniden DXI5586-2 | English Owners Manual - Page 13
    plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See page 35.) Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main
  • Uniden DXI5586-2 | English Owners Manual - Page 14
    to be re-registered. To re-register, follow the same registration process on page 13. 3) If the second handset's battery becomes very low, the handset must be recharged for 15-20 hours and re-registered to the main base unit. [ 14 ] W H E N T O R E - R E G I S T E R H A N D S E T S www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 15
    . (Headset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2. BASIC SETUP Activating AutoTalk AutoTalk allows you to answer the phone simply by removing the handset from the cradle. You do not have to
  • Uniden DXI5586-2 | English Owners Manual - Page 16
    comes programmed for tone dialing. If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, follow the steps below: [ 16 ] B A S I C S E T U P www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 17
    Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode. BASIC SETUP Setting the Language You can change the language the menu display uses. Choose from English, French, or Spanish. 1) When the phone is in standby mode, Press and hold
  • Uniden DXI5586-2 | English Owners Manual - Page 18
    the number. 3) Press the talk/flash key. Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically answer the call when you pick it up.) 2) Press the talk/flash key. OR 1) If the handset is off the cradle, press the talk/flash, /tone/ , #/ number key
  • Uniden DXI5586-2 | English Owners Manual - Page 19
    , you can answer the transferred call by pressing any number key, the /tone/ or #/ key (when AutoTalk is set to on). If you transfer a call and it is not picked up after 5 minutes, the call will be disconnected. USING YOUR PHONE Redialing the Last Dialed Number 1) Remove the handset from the
  • Uniden DXI5586-2 | English Owners Manual - Page 20
    , you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated such as telephone bank tellers, telephone prescription refills, customer support menus,etc. If your phone is set to pulse dialing mode, make your call normally. Once your
  • Uniden DXI5586-2 | English Owners Manual - Page 21
    to move your handset too far from your main base, noise increases. If you pass the range limits of the main base, your call will terminate within one minute. Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear
  • Uniden DXI5586-2 | English Owners Manual - Page 22
    service, you can use your cordless telephone to access your voice mailbox. The charge/in use LED on the main base of your phone flashes whenever you have messages voice mail waiting indicator remains on after you have retrieved your messages, press and hold the find hs key for 5 seconds. This will reset the
  • Uniden DXI5586-2 | English Owners Manual - Page 23
    not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you can save your bank account number to speed dial memory. When you call your bank's telephone teller service and are prompted
  • Uniden DXI5586-2 | English Owners Manual - Page 24
    set. 4) Enter a name according to the instructions below, then press the select/channel key. If no name is required, go to step 5. • The name can be up to 13 characters. • Use W X Y Z w x y z 9 * # - & ( ) (blank) 0 [ 24 ] U S I N G T H E S P E E D D I A L M E M O R Y www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 25
    phone is ready for the number to be entered. Store Number 6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you need the phone memory, if the handset is idle (i.e., no key is pressed) for more than 30 seconds, it will beep rapidly, and the phone will return to
  • Uniden DXI5586-2 | English Owners Manual - Page 26
    ID list can be stored in memory dialing. For instructions on viewing the Caller ID Message list, see page 29. 1) Press the call id/menu key. Select the phone number to be stored from the Caller ID list -1234 Replace Memory? Yes No [ 26 ] U S I N G T H E S P E E D D I A L M E M O R Y www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 27
    DOE 3) Press the talk/flash key. Connecting changes to Talk, and the volume setting and the number selected appear on the display. Then the displayed number is dialed. Talk 07303456 To cancel speed dialing Press the end key to cancel speed dialing. The handset returns to standby mode. Also, if
  • Uniden DXI5586-2 | English Owners Manual - Page 28
    • If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name do not appear. (This includes
  • Uniden DXI5586-2 | English Owners Manual - Page 29
    messages and total messages. 2) Use the M key to scroll through the messages from the latest to the earliest, or use the L key to scroll through the messages sounds and the handset returns to standby mode. • Each message can be up to 15 characters for the name and 15 digits for the phone number. •
  • Uniden DXI5586-2 | English Owners Manual - Page 30
    , an error tone sounds, and the handset returns to standby mode. • If you get an incoming call or page, the deleting operation is canceled and you can answer the call or page. Deleting Information from the Caller ID List If the phone receives more Caller ID messages than it can store, the oldest
  • Uniden DXI5586-2 | English Owners Manual - Page 31
    ID number, press 3. 3) Press the talk/flash key. The displayed phone number dials automatically. 5/17 12:30PM 03 Jane Smith 214-555-1234 Talk 2145551234 You cannot make a call from the Caller ID list if your cordless telephone is connected to a private branch exchange (PBX). Caller ID on Call
  • Uniden DXI5586-2 | English Owners Manual - Page 32
    be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1) Remove the handset from the cradle. Press and hold the find hs
  • Uniden DXI5586-2 | English Owners Manual - Page 33
    and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. Caution • Use only the specified Uniden battery pack (BT-905). • Do not remove the battery from the handset to
  • Uniden DXI5586-2 | English Owners Manual - Page 34
    is removed. Dry the contacts thoroughly before returning the handset to the cradle. Caution Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. [ 34 ] N O T E O N P O W E R S O U R C E S www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 35
    120V AC 60Hz 9V DC 210mA Battery Information Battery part number: Capacity: BT-905 600mAh, 3.6V Frequency 925.181-927.451 MHz 5739.320-5746.130 MHz • To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-905 with your phone. • If the handset is left off the cradle
  • Uniden DXI5586-2 | English Owners Manual - Page 36
    simple steps do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.) Symptom The charge/in use LED or charge LED won't illuminate when the handset is placed in the cradle. The audio
  • Uniden DXI5586-2 | English Owners Manual - Page 37
    may not be active; contact your local telephone service provider. • Make sure the battery pack is connected to the handset and fully charged. • Re-register the non-functional handset. • Make sure the other handset is not already in use. Both handsets cannot be in talk mode at the same time. • Place
  • Uniden DXI5586-2 | English Owners Manual - Page 38
    or the other handset. • Re-register both handsets (see page 13). No 3- way conversation. • Only one handset at a time can talk with an outside caller. To allow the other handset to talk to the caller, transfer the call. Voice Message Indication does • Contact your local telephone company to make
  • Uniden DXI5586-2 | English Owners Manual - Page 39
    the battery pack to avoid charge interruption. CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service
  • Uniden DXI5586-2 | English Owners Manual - Page 40
    is a registered trademark of the Rechargeable Battery Recycling Corporation. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Uniden works
  • Uniden DXI5586-2 | English Owners Manual - Page 41
    using your cordless telephone may not be private. One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden
  • Uniden DXI5586-2 | English Owners Manual - Page 42
    equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of Privacy of communications may not be ensured when using this telephone". [ 42 ] I . C . N O T I C E www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 43
    and standby times 34 Technical information 35 Tone dialing switch-over 20 Transferring a call 19 Traveling out-of-range 21 Troubleshooting 36 V, W, X, Y, Z Voice mail waiting indicator..........22 Volume control Handset 17, 20 Wall mounting 11 Warranty 41 www.uniden.com I N D E X [ 43 ]
  • Uniden DXI5586-2 | English Owners Manual - Page 44
    Memo [ 44 ] www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 45
    Memo www.uniden.com [ 45 ]
  • Uniden DXI5586-2 | English Owners Manual - Page 46
    [ 46 ] M E M O R Y L I S T www.uniden.com
  • Uniden DXI5586-2 | English Owners Manual - Page 47
    800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.) Need a Part? To order headsets, additional handsets, replacement batteries or other accessories, visit our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST
  • Uniden DXI5586-2 | English Owners Manual - Page 48
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48