Vaddio EasyUSB MicPOD I/O and Two Ceiling MicPODs TRIO MIC and TRIO MIC I/O Te

@2015 Vaddio - All Rights Reserved, Phone:

763-971-4400, Toll Free:

800-572-2011, FAX:

763-971-4464

Page 1 of 2

Overview:

The Vaddio™ TRIO Mic I/O interface enables the TRIO

Acoustic Echo Canceling Microphones to be used with any

professional DSP audio mixer.

Connect the TRIO Ceiling or

Table Mics to the TRIO Mic I/O interface and instantly make

any mixer capable of Acoustic Echo Cancellation for use in

conferencing applications.

Vaddio TRIO Table and Ceiling Microphones incorporate SmartMic technology along with built-in DSPs for the ultimate in simple

control and maximum performance.

The technology integrates automatic microphone mixing, wideband echo cancelation, noise

reduction, and automated gain control into the microphones and eliminates the need for super expensive, hard to program and

operate conferencing mixers.

Like many Vaddio products, a simple Cat-5/5e/6 UTP cable connection and no clumsy software configuration makes the TRIO

microphones as simple to install as traditional boundary or celling microphones.

The TRIO Mic I/O connects up to four TRIO

Microphones over Cat-5 cables.

The Cat-5 cable carries power to the microphone and returns the processed audio from the

TRIO mics.

The TRIO Mic I/O has four (4) individual line level balanced outputs, each representing the echo canceled audio

channel from the individual TRIO mics.

An Acoustical Echo Cancellation (AEC) Reference input channel is included on the rear

panel for connection to the far-end audio signal coming into the conference room.

The AEC Reference channel is needed for

the TRIO mic to keep the far-end audio from going into the room mics and echoing back to the far-end.

The TRIO Table and Ceiling microphones each have three (3) mic elements, provide a 360º pickup pattern and connect to the

TRIO Mic I/O with a Cat-5 cable for power and audio.

The TRIO Ceiling Mic has a plenum safe sealed enclosure for the

electronics and a 36” (914.4mm) drop cable to a 2.5” (63.5mm) spherical shaped mic array.

The TRIO Ceiling Mics come in

either a dark charcoal or a white version.

The combination of the TRIO Mic I/O, the TRIO Table Mics or the TRIO Ceiling Mics

turns any mixer into an automatic mixer with wideband echo cancelation, noise reduction, and automated gain control.

Part Numbers

999-8535-000 (North America), 999-8535-001 (Int’l)

Audio Specs

Frequency Response: 20 HZ to 20KHZ, Dynamic Range: >90dB, THD + Noise: < 0.02%

Line Outputs

Four (4) 3-Pin Balanced, Line Level Outputs

AEC Reference Input

One (1)

3-Pin Balanced, Line Level Input

TRIO Mic Ports

Connectors:

Four (4) RJ 45-F, Proprietary Interface with audio, power & control, 100’ (30.48m) Cat-5 cable distance

Power Supply

18 VDC, 2.75 Amp, Positive Center

Power Consumed

Maximum of 40 Watts

Operating Temp.

32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity

Dimensions / Weight

8.375” (212.7mm) W x 1.72”” (43.7) H x 6.0” (152.4mm) D / 1.45 lbs. (0.657708956434 kg)

Accessories

Included:

Power Supply, Five (5) 3-Pin 5.0mm Phoenix-type Connectors

Opt. Accessories

Optional:

Rack Mount Kit 1-RU:

998-6000-004 (one long ear and one short ear)

TRIO Mic I/O and TRIO Mics

Breakout Interface for use with TRIO Acoustic Echo Canceling Microphones

SPECIFICATIONS - TRIO Mic I/O Interface