Vaddio Vaddio ClearVIEW HD-20 ClearVIEW HD-20 Camera Firmware Update Instructi
Vaddio Vaddio ClearVIEW HD-20 Manual
View all Vaddio Vaddio ClearVIEW HD-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Vaddio Vaddio ClearVIEW HD-20 manual content summary:
- Vaddio Vaddio ClearVIEW HD-20 | ClearVIEW HD-20 Camera Firmware Update Instructi - Page 1
Vaddio HD-20 Camera Firmware Update Instructions NOTE: There are two separate files for camera operation. They are labeled Motor and Camera/Control. Please refer to the appropriate section in these instructions for the file you will be updating. Requirements: - RS232 adapter (Vaddio part# 998-1001- - Vaddio Vaddio ClearVIEW HD-20 | ClearVIEW HD-20 Camera Firmware Update Instructi - Page 2
connect to the serial port or USB/serial adapter on the computer. • Open the Vaddio Loader and select Camera under Product Type and choose ClearVIEW HD-20 (Camera/Control) from the drop down menu. (NOTE: Make sure Camera file is selected not motor or video) • Click Select Load File and browse to - Vaddio Vaddio ClearVIEW HD-20 | ClearVIEW HD-20 Camera Firmware Update Instructi - Page 3
the serial port or USB/serial adapter on the computer. • Open the Vaddio Loader and select Camera under Product Type and choose ClearVIEW HD-20 (Motor) from the drop down menu. (NOTE: Make sure Motor file is selected not Camera/Control or video) • Click Select Load File and browse to location where - Vaddio Vaddio ClearVIEW HD-20 | ClearVIEW HD-20 Camera Firmware Update Instructi - Page 4
on File and select Serial Commands in Vaddio Loader. Select Device Inquiry and Vaddio Version and hit send. A valid response is an example below. This is a USB camera response from the lower rs232 port. If you have any questions call Tech Support at Vaddio. 763.971.4400. If the update procedure
Vaddio HD-20 Camera Firmware Update Instructions
NOTE: There are two separate files for camera operation. They are labeled Motor and
Camera/Control.
Please refer to the appropriate section in these instructions for the file you will be
updating.
Requirements:
- RS232 adapter (Vaddio part# 998-1001-232)
- PC with serial connection or USB to Serial Adapter
- Latest version of Vaddio Loader program from
Vaddio Support
website
(Scroll down to Vaddio Loader at bottom of page)
- Ethernet cable
- Camera software
1: Download and save software here:
(Scroll down to
Software Updates – choose appropriate software file for the update needed)
2: Download and install latest Vaddio loader software
here
:
-
(Scroll down to Vaddio Loader at bottom of page) NOTE: If you have a previous version of Vaddio Loader
installed, go to Control Panel and un-install previous version.
3: Make sure you know which PC com port is used with your serial connection and open Vaddio Loader.
Select the proper com port if prompted.