Vantec NST-328S3-BK Manual
Vantec NST-328S3-BK - NexStar® TX Manual
 |
View all Vantec NST-328S3-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Vantec NST-328S3-BK manual content summary:
- Vantec NST-328S3-BK | Manual - Page 1
shown to fully connect the SATA interface. 6. Secure two screws on each side to hold the drive to the Tray. Housing Tray 7. Align the Tray guide rail to the housing guide and slide the Tray into the housing. 8. Replace the end cover plate and secure with two screws. - Vantec NST-328S3-BK | Manual - Page 2
is strictly forbidden. Printed in China Printed on Recycled Paper. 12b. Once formatted, the NexStar TX is ready for use. v1.01 NST-328S3-BK www.vantecusa.com Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. | All Registered Trademarks Belong To Their Respective Companies.
-
1 -
2
 |
 |
Enclosure for 3.5” SATA 6Gbps HDD
3.
Note the SATA interface in the Tray and your
SATA drive.
5.
Push the drive in the direction shown to fully
connect the SATA interface.
6.
Secure two screws on each side to hold the drive
to the Tray.
1.
Verify the package contents.
2.
Remove the end cover and slide the Tray out.
4.
Align Tray SATA interface with Drive SATA
interface and insert to connect the SATA
interface together.
7.
Align the Tray guide rail to the housing guide
and slide the Tray into the housing.
Housing
Tray
8.
Replace the end cover plate and secure with
two screws.