Vantec NST-536S3-BK Datasheet
Vantec NST-536S3-BK - NexStar® DX Manual
 |
View all Vantec NST-536S3-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Vantec NST-536S3-BK manual content summary:
- Vantec NST-536S3-BK | Datasheet - Page 1
Installation Guide Package content 3. Insert the 5.25" device 1. Remove the back panel SATA Port SATA Data and Power Connector 4. Connect the SATA connector 2. Slide the tray out 5. Align the device to the front edge 6. Screw the drive firmly 7. Slide the tray back into enclosure and install - Vantec NST-536S3-BK | Datasheet - Page 2
of these materials in any manner whatsoever without written permission is strictly forbidden. Printed in China Printed on Recycled Paper. Model: NST-536S3-BK Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. All Registered Trademarks Belong To Their Respective Companies.
-
1 -
2
 |
 |
Installation Guide
SATA Port
SATA Data and
Power Connector
Package content
Remove the back panel
1.
Slide the tray out
2.
Connect the SATA connector
4.
Insert the 5.25" device
3.
6. Screw the drive firmly
Align the device to the front edge
5.
Slide the tray back into enclosure and install the back panel
7.