ViewSonic LS832WU User Guide English

ViewSonic LS832WU Manual

Get ViewSonic LS832WU PDF manuals and user guides View all ViewSonic LS832WU manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic LS832WU manual content summary:

  • ViewSonic LS832WU | User Guide English - Page 1
    important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www
  • ViewSonic LS832WU | User Guide English - Page 2
    exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well. Once again, thank
  • ViewSonic LS832WU | User Guide English - Page 3
    Please read the following Safety Precautions before you start using the projector. • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20" (50 cm) clearance around the projector to ensure proper ventilation. • Place
  • ViewSonic LS832WU | User Guide English - Page 4
    present, immediately switch the projector off and call your dealer or ViewSonic®. It is dangerous to continue using the projector. • Use only being used for a long period of time. • Refer all servicing to qualified service personnel. CAUTION: Possibly hazardous optical radiation is emitted from this
  • ViewSonic LS832WU | User Guide English - Page 5
    Safety Precautions - Ceiling Mounting Please read the following Safety Precautions before you start using the projector. If you intend to mount the projector on the ceiling, it is strongly recommended that you use a proper fitting projector ceiling mount kit and that you ensure it is securely and
  • ViewSonic LS832WU | User Guide English - Page 6
    Contents Safety Precautions 3 Introduction 8 Package Contents...8 Product Overview...9 Projector...9 Keypad...10 Indicator Lights...10 I/O Ports...11 Remote Control...12 Initial Setup 16 Choosing a Location - Projection Orientation 16 Projection Dimensions 17 Mounting the Projector 18 Making
  • ViewSonic LS832WU | User Guide English - Page 7
    59 Projector Dimensions 60 Timing Chart...61 HDMI PC Timing...63 3D Support Timing 65 Troubleshooting...66 LED Indicators...68 Maintenance...69 General Precautions 69 Cleaning the of Product Life 73 Copyright Information 74 Customer Service 75 Limited Warranty 76 Mexico Limited Warranty 79 7
  • ViewSonic LS832WU | User Guide English - Page 8
    Introduction Package Contents 1 Number 1 2 3 4 5 23 4 5 Description Projector Remote Control Batteries Quick Start Guide Power Cord NOTE: The power cord and remote control included in your package may vary depending on your country. Please contact your local reseller for more information. 8
  • ViewSonic LS832WU | User Guide English - Page 9
    Product Overview Projector 5 6 14 9 4 2 3 7 8 Number 1 2 3 4 5 6 7 8 9 Description Keypad Focus Switch Vent (inlet) Remote IR Sensor Vent (outlet) Speaker AC IN Socket I/O Ports Lens NOTE: • Do not block projector intake and exhaust vents. • When operating the projector in an enclosed
  • ViewSonic LS832WU | User Guide English - Page 10
    SOURCE OURCE ENTER MENU Key AUTO Power Keystone ENTER ENNaTvERigation AUTO Description Toggles the projector between standby mode and Power On. Manually corrects distorted images resulting from an angled projection. AUTO Selects the desired menu items and makes AUTOadjustments when the On-Screen
  • ViewSonic LS832WU | User Guide English - Page 11
    Component video (YPbPr/YCbCr) signal input socket. 2 HDMI1 HDMI port. 3 SERVICE USB Type B port for service. 4 RJ-45 LAN port. 5 USB (5V/1.5A Out) USB Type signal input socket. 10 Microphone NOTE: Only supports microphone input; does not support audio in. Plugging in the wrong cable
  • ViewSonic LS832WU | User Guide English - Page 12
    Remote Control 1 3 5 7 10 12 13 16 18 20 22 2 4 6 8 9 11 14 15 17 19 21 23 Button 1 AV Mute 2 Power 3 Auto Sync 4 Source 5 Navigation Buttons 6 Enter 7 Menu/Exit 8 Brightness 9 Volume Up Description Hides the screen picture and volume mute. Turns the projector On or Off
  • ViewSonic LS832WU | User Guide English - Page 13
    Aspect 16 Page Up 17 Zoom In 18 Freeze 19 Zoom Out 20 Page Down 21 Display Mode 22 Mouse Mode 23 Mute Description Manually correct distorted images. Decrease the volume level. Unsupported Button Selects the COMPUTER IN port for display. Selects the HDMI 1 or HDMI 2 input source. Displays
  • ViewSonic LS832WU | User Guide English - Page 14
    Remote Control - Receiver Range To ensure proper function of the remote control follow the steps below: 1. The remote control must be held at an angle within 30° perpendicular to the projector's IR remote control sensor(s). 2. The distance between the remote control and the sensor(s) should not
  • ViewSonic LS832WU | User Guide English - Page 15
    for an extended period of time, remove the batteries to avoid damage to the remote control. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. 15
  • ViewSonic LS832WU | User Guide English - Page 16
    Initial Setup This section provides detailed instructions for the initial set up your projector. Choosing a Location - Projection Orientation Personal preference and room layout will decide the installation location. Consider the following: • Size
  • ViewSonic LS832WU | User Guide English - Page 17
    Projection Dimensions • 16:10 Image on a 16:10 Screen NOTE: • (e) = Screen (f) = Center of Lens ͫ The distance from the center of the lens to the rear of the projector is 262 mm (10.31 in.). 16:10 Image on a 16:10 Screen (a) Screen Size (b) Projection Distance in. mm in. mm 80 2032 6.85
  • ViewSonic LS832WU | User Guide English - Page 18
    correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach the mount to the projector meet the following specifications: • Screw type: M4 x 10
  • ViewSonic LS832WU | User Guide English - Page 19
    Making Connections Connecting to Power 1. Connect the power cord to the AC IN jack at the rear of the projector. 2. Plug the power cord into a power outlet. 2 1 NOTE: When installing the projector, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to
  • ViewSonic LS832WU | User Guide English - Page 20
    Connecting to External Devices VGA Connection Connect one end of a VGA cable to the VGA port of the computer. Then connect the other end of the cable to the COMPUTER IN port of the projector. NOTE: Some computers do not turn on their external displays automatically when connected to a projector. You
  • ViewSonic LS832WU | User Guide English - Page 21
    VGA Out Connection To view the projected content up close on a monitor as well as project it, a monitor can be connected to the MONITOR OUT port of the projector. After establishing the VGA Connection, connect one end of a VGA cable to the VGA port of your monitor. Then connect the other end of the
  • ViewSonic LS832WU | User Guide English - Page 22
    HDMI Connection Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI 1/2 port of your projector. NOTE: The HDMI 1 and 2 ports support HDCP 2.2. 22
  • ViewSonic LS832WU | User Guide English - Page 23
    Audio and Microphone Connection The projector supports both Audio In and Audio Out as well as Microphone input . Microphone Connect a microphone directly to the Microphone port. NOTE: Only supports microphone input; does not support audio in. Plugging in the wrong cable may damage the projector. 23
  • ViewSonic LS832WU | User Guide English - Page 24
    USB Connection USB Type A Connection The USB Type A port is for supplying power (e.g., dongles). USB Type B Connection The USB Type B port is for servicing the projector. 24
  • ViewSonic LS832WU | User Guide English - Page 25
    Network Connection Plug the network cable into the LAN port for network connectivity. The projector provides several networking and remote management features. The LAN /RJ45 function of the projector, through a network, can control the projector remotely. 25
  • ViewSonic LS832WU | User Guide English - Page 26
    RS-232 Connection When you use a RS-232 serial port cable to connect the projector to an external computer certain functions can be controlled remotely by the PC, including Power On/Off, Volume adjustment, Input select, Brightness, and more. 26
  • ViewSonic LS832WU | User Guide English - Page 27
    Using the Projector Starting Up the Projector 1. Ensure the projector's power cord is properly connected to a power outlet. 2. Press the Power button on the projector or remote control to turn on the projector. NOTE: • The Power Indicator Light will be flashing blue during startup. • The first time
  • ViewSonic LS832WU | User Guide English - Page 28
    Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. When Auto Source is On, the projector will automatically search for input sources. If multiple sources are connected, press the Source button on the
  • ViewSonic LS832WU | User Guide English - Page 29
    Adjusting the Projected Image Adjusting the Projector's Height and Projection Angle The projector is equipped with three (3) adjustment feet. Adjusting the feet will change the projector's height and the vertical projection angle. Adjustment Feet Adjustment Ring 29
  • ViewSonic LS832WU | User Guide English - Page 30
    Adjusting the Focus and Keystone You can improve and adjust the clarity and position of the image by adjusting the Focus Switch or Keystone Keys. 30
  • ViewSonic LS832WU | User Guide English - Page 31
    Shutting Down the Projector 1. Press the Power button on the projector or remote control and a "power off message" will appear. 2. Press the Power button again to confirm and shut down the projector. 3. The Power Indicator Light will turn solid red and enter standby mode. 31
  • ViewSonic LS832WU | User Guide English - Page 32
    Operating the Projector On-Screen Display (OSD) Menu The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. Display Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone i Select Exit 4:3 0 0 Enter Menu
  • ViewSonic LS832WU | User Guide English - Page 33
    Menu Navigation 1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit button on the projector or the remote control. 2. When the OSD is displayed, use the Navigation buttons (pq) to select any item in the main menu. While making a selection on a particular page, press the Enter button on
  • ViewSonic LS832WU | User Guide English - Page 34
    On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Menu Option Presentation Bright HDR SIM. Cinema Display Mode sRGB DICOM SIM. Blending User 3D Off Blackboard Light Yellow Wall Color Light Green Light Blue Display Image Settings Pink Gray Brightness (-/+, -50~50) Contrast
  • ViewSonic LS832WU | User Guide English - Page 35
    Main Menu Display Sub-menu Image Settings Color Settings Menu Option Brilliant Color™ (-/+, 1~10) Color Temperature Warm Standard Cool Color Color Matching RGB Gain/Bias Hue/R Saturation/G Gain/B Reset Exit Red Gain Green Gain Blue Gain Red Bias Green Bias Blue Bias Reset Exit (Non-HDMI
  • ViewSonic LS832WU | User Guide English - Page 36
    Main Menu Display Sub-menu Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Signal Brightness Mode Reset 3D Mode 3D - 2D 3D Format 3D Sync Invert Reset 4:3 16:9 16:10 LBX Native Auto (-/+, 0~10) (-/+, -5~25) Horizontal (H.) Vertical (V.) Menu Option Off Automatic On Frequency (-/+, -10
  • ViewSonic LS832WU | User Guide English - Page 37
    Main Menu Sub-menu Display Audio Setup Four Corners Keystone Audio Settings Mute Mic Volume Mic Volume Projection Screen Type H. Keystone V. Keystone Reset Auto Internal Speaker Audio Out Off On Off On (-/+, 0~10) (-/+, 0~10) Front Table Rear Table Front Ceiling Rear Ceiling 16:9 16:10 Filter
  • ViewSonic LS832WU | User Guide English - Page 38
    Main Menu Sub-menu Direct Power On Signal Power On Setup Power Settings Sleep Timer (min.) Auto Power Off Power Mode (Standby) Security Security Security Timer HDMI CEC Change Password HDMI CEC Test Pattern Test Pattern Menu Option Off On Off On (-/+, 0~990) No Always On Yes (-/+, 0~
  • ViewSonic LS832WU | User Guide English - Page 39
    Main Menu Sub-menu Setup Options Language Menu Option English Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk Suomi Magyar Čeština ไทย Türkçe Tiếng Việt Bahasa Indonesia Română Slovenčina 39
  • ViewSonic LS832WU | User Guide English - Page 40
    Main Menu Sub-menu Setup Options Reset Menu Settings Auto Source Input Source High Altitude Logo Background Color HDMI Settings Reset to Default Menu Option Top-Left Top-Right Menu Location Center Bottom-Left Bottom-Right Off Menu Timer 5 seconds 10 seconds Off On HDMI 1 HDMI 2
  • ViewSonic LS832WU | User Guide English - Page 41
    Main Menu Sub-menu Network Status MAC Address DHCP LAN IP Address Subnet Mask Gateway DNS Reset Network Crestron Extron Control PJ Link AMX Device Discovery Telnet HTTP Menu Option Off On xxx.xxx.xxx xxx.xxx.xxx xxx.xxx.xxx xxx.xxx.xxx Off On Off On Off On Off On Off On Off On 41
  • ViewSonic LS832WU | User Guide English - Page 42
    Main Menu Information Sub-menu Serial Number Source Resolution Refresh Rate Display Mode Power Mode (Standby) Light Source Hours Network Status IP Address Filter Usage Hours Brightness Mode Firmware Version System LAN MCU Menu Option 42
  • ViewSonic LS832WU | User Guide English - Page 43
    can be selected to enhances non-HDR content with simulated High Dynamic Range (HDR). NOTE: When HDMI EDID 2.0 is selected, HDMI 1/2 can support HDR/HLG format. Provides the best balance of detail and colors for watching movies. Standardized sRGB color gamut. Suitable for projecting monochrome images
  • ViewSonic LS832WU | User Guide English - Page 44
    Menu Image Settings Description Wall Color Designed to adjust the colors of the projected image when projecting on to a wall without a screen. NOTE: A screen is recommended for more accurate color reproduction. Brightness The higher the value, the brighter the image. Lower values will result in a
  • ViewSonic LS832WU | User Guide English - Page 45
    Menu Image Settings Color Settings Description Setting Brilliant Color™ Color Temperature Description A color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture. Select from Warm, Standard, or Cool. Only in permanent
  • ViewSonic LS832WU | User Guide English - Page 46
    Menu Image Settings Description Signal Adjust the signal options. Setting Automatic Frequency Phase H. Position V. Position Description Automatically configure the signal (Frequency and Phase will be grayed out). If Automatic is disabled, Frequency and Phase can be then be adjusted. Change the
  • ViewSonic LS832WU | User Guide English - Page 47
    : • This projector is a 3D ready projector with DLP-Link 3D solution. Please make sure your 3D glasses are for DLP-Link 3D. This projector supports frame sequential (page-flip) 3D via the HDMI 1/HDMI 2/VGA ports. For the best performance, 1920 x 1080 resolution is recommended. Please note that 4K
  • ViewSonic LS832WU | User Guide English - Page 48
    Menu Aspect Ratio Edge Mask Zoom Image Shift Description Select the aspect ratio of the projected image. Aspect Ratio Description Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 4:3 images like computer monitors,
  • ViewSonic LS832WU | User Guide English - Page 49
    Menu Keystone Option Four Corners H. Keystone V. Keystone Reset Description Description Adjust each corner to make a square image when the projection surface is not level. NOTE: While adjusting the Four Corners, the Aspect Ratio, Edge Mask, Image Shift, and Zoom menus will be disabled. To enable
  • ViewSonic LS832WU | User Guide English - Page 50
    Enter Description Select the audio output device. Temporarily turn off the sound. Enable or disable the microphone. NOTE: Only supports microphone input; does not support audio in. Plugging in the wrong cable may damage the projector. Adjust the volume level. Adjust the microphone volume level
  • ViewSonic LS832WU | User Guide English - Page 51
    Setup Menu Setup Projection Screen Type Filter Settings Power Settings Security HDMI CEC Test Pattern Options i Select Exit 16:10 Enter Menu Projection Screen Type Filter Settings Description Select the preferred projection: Front, Rear, Ceiling-Top, and Rear-Top. Choose the screen type from
  • ViewSonic LS832WU | User Guide English - Page 52
    Menu Power Settings Description Direct Power On Automatically power on the projector when AC power is supplied, without pressing the Power button on the projector or the remote control. Signal Power On Automatically power on the projector when a signal is detected, without pressing the Power
  • ViewSonic LS832WU | User Guide English - Page 53
    Menu Security HDMI CEC Test Pattern Description Security Enable or disable a password prompt before using the projector. NOTE: The default password is: 1234 Security Timer Set the amount of time the projector can be used. Once this time has elapsed you will be requested to enter your password again
  • ViewSonic LS832WU | User Guide English - Page 54
    Menu Options Description Language Select the On-Screen Display (OSD) Menu language. Menu Settings Set the menu location on screen and configure the menu timer settings. Auto Source Find an available input source. Option Off On Description Only search the current input selection. Press the
  • ViewSonic LS832WU | User Guide English - Page 55
    Menu Options Reset Description HDMI Settings Configure the HDMI settings. Option EDID 1.4 EDID 2.0 Description Select this option when using 1080p sources (e.g., Xbox 360, Cable Box, Satellite Box, etc.). Select this option when using 1080p HDR sources (e.g., Xbox One S or PS4) and 4K HDR
  • ViewSonic LS832WU | User Guide English - Page 56
    Network Menu LAN Control Network i Menu LAN Control Select Exit Enter Description View network information and enable/disable DHCP. Enable or disable network control suites. NOTE: To connect successfully, the control suite must be enabled. Network Control Crestron Extron PJ Link AMX Device
  • ViewSonic LS832WU | User Guide English - Page 57
    and go to: Network > LAN. 3. Select DHCP and turn it On to obtain an IP address automatically; or select Off to enter the network information manually. (Press the MENU button to apply the entered values.) NOTE: Please wait for around 15~20 seconds, then re-enter the LAN settings page. The
  • ViewSonic LS832WU | User Guide English - Page 58
    Information Menu View Serial Number, Source, Resolution, Refresh Rate, Display Mode, Power Mode (Standby), Light Source Hours, Network Status, IP Address, Brightness Mode, Filter Usage Hours, and Firmware Version information. Information Serial Number Source Resolution Refresh Rate Display Mode
  • ViewSonic LS832WU | User Guide English - Page 59
    Appendix Specifications Item Projector Input Signal Resolution Power Operating Conditions Category Type Display Size Throw Ratio Lens Display System HDMI 1.4 HDMI 2.0 VGA Native Input Voltage Temperature Humidity Altitude Storage Conditions Dimensions Weight Power Consumption Temperature
  • ViewSonic LS832WU | User Guide English - Page 60
    Projector Dimensions 382 mm (W) x 132 mm (H) x 318 mm (D) 60
  • ViewSonic LS832WU | User Guide English - Page 61
    50/60/120 67 75 75 50/60 Refresh Rate (Hz) 50/60 50/60 50/60 60 50 60 50 ² 1920 x 1080 @ 60Hz only supports RB (Reduced Blanking) ³ Mac 60 61
  • ViewSonic LS832WU | User Guide English - Page 62
    HDMI Video Timing HDMI 1.4 Timing HDTV(1080p) HDTV(1080i) HDTV(720p) SDTV(480p) SDTV(576p) SDTV(480i) SDTV(576i) HDMI 2.0 Timing UHDTV(2160p) HDTV(1080p) HDTV(1080i) HDTV(720p) SDTV(480p) SDTV(576p) SDTV(480i) SDTV(576i) Resolution 1920 x 1080 1920 x 1080 1280 x 720 720 x 480 720 x 576 720 x 480
  • ViewSonic LS832WU | User Guide English - Page 63
    /85 60/75 60/72/75/85 60 60 60 60 59.94 50/60/120 67 75 75 50/60 ⁴ 1920 x 1200 @ 60Hz only supports RB (Reduced Blanking) 63
  • ViewSonic LS832WU | User Guide English - Page 64
    /75 60/72/75/85 60 60 60 60 59.94 50/60/120 67 75 75 50/60 50/60 ⁵ 1920 x 1200 @ 60Hz only supports RB (Reduced Blanking) 64
  • ViewSonic LS832WU | User Guide English - Page 65
    3D Support Timing Signal 1080p 720p Signal 1080i 1080p Signal 1080p 720p HDMI 3D Frame Packing Format Resolution 1920 x 1080 1280 x 720 Side by Side Format Resolution
  • ViewSonic LS832WU | User Guide English - Page 66
    Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue The projector does not turn on There is no picture The image is blurred Possible Solutions • Ensure the power cord is properly attached
  • ViewSonic LS832WU | User Guide English - Page 67
    Problem or Issue The remote control does not work The projector stops responding to all controls Possible Solutions • Ensure there are no obstacles between the remote
  • ViewSonic LS832WU | User Guide English - Page 68
    from the projector, wait for 30 seconds and try again. If the warning indicators light up or flash, please contact your nearest service center for assistance. Status and Description Power Indicator Light Red Blue Temperature Light Source Indicator Light Indicator Light Red Red Standby State
  • ViewSonic LS832WU | User Guide English - Page 69
    sure the projector is turned off and the power cable is unplugged from the power outlet. • Never remove any parts from the projector. Contact ViewSonic® or a reseller when any part of the projector needs replacing. • Never spray or pour any liquid directly onto the case. • Handle the projector with
  • ViewSonic LS832WU | User Guide English - Page 70
    Regulatory and Service Information Compliance Information This section addresses all connected requirements radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • ViewSonic LS832WU | User Guide English - Page 71
    CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Ecodesign Directive 2009/125/EC. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and
  • ViewSonic LS832WU | User Guide English - Page 72
    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to
  • ViewSonic LS832WU | User Guide English - Page 73
    0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the
  • ViewSonic LS832WU | User Guide English - Page 74
    damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of
  • ViewSonic LS832WU | User Guide English - Page 75
    Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product's serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia 中国 (China) www.viewsonic.com/au/ www.viewsonic.com.cn
  • ViewSonic LS832WU | User Guide English - Page 76
    original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or local ViewSonic® office for the warranty information. Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp only
  • ViewSonic LS832WU | User Guide English - Page 77
    ViewSonic® Customer Support (Please refer to the "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide: (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
  • ViewSonic LS832WU | User Guide English - Page 78
    Canada: For warranty information and service on ViewSonic® products sold outside of the U.S.A. and Canada, contact ViewSonic® or your local ViewSonic® dealer. The warranty period at: http://www.viewsonic.com/eu/ under "Support/Warranty Information". Projector Warranty Term Template In UG VSC_TEMP_2005
  • ViewSonic LS832WU | User Guide English - Page 79
    be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. ͫ Any damage of the product set-up service charges. 79
  • ViewSonic LS832WU | User Guide English - Page 80
    service: For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached "Customer Service problem, and (e) the serial number of the product. 2. Take or ship the product, in the original container packaging, to an authorized ViewSonic® service
  • ViewSonic LS832WU | User Guide English - Page 81
    Colo Centro 39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Reyes, 20 de Noviembr Tijuana, Mexico FOR USA SUPPORT: ViewSonic® Corporation 381 Brea Canyon Road, Walnut, CA. 91789 USA Tel: 800-688-6688 E-Mail
  • ViewSonic LS832WU | User Guide English - Page 82
    82
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
LS832WU
Projector
User Guide
Model No. VS19516
P/N: LS832WU
IMPORTANT:
Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service.
Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic
®
Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box on our website.