ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati
ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Ratio Manual
![]() |
View all ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Ratio manual content summary:
- ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 1
a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS16970/VS16971 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 2
. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 3
ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 5
product will best prepare you for future customer service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 6
Table of Contents Key safety instructions..... 1 Introduction 3 Projector features 3 Shipping contents 4 External appearance of the projector......... 5 Device control and functions 6 menu 41 Maintenance 45 Care of the projector 45 LED Indicator 46 Troubleshooting 47 Specifications 48 v - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 7
Projector specifications 48 Dimensions 49 Ceiling mount installation 49 Timing chart 50 Copyright information..... 54 Copyright 54 Disclaimer 54 Appendix 55 IR control table 55 Address Code 56 RS232 command table 57 vi - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 8
user safety. Safety Instructions ●●Please read through this manual before using the projector. Save it for future reference. ●●Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. ●●Refer servicing to qualified service personnel. ●●Always open - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 9
lever should only be used with the anti-theft cables sold on the market. Safety instructions for ceiling mounting of the projector We hope you to have a pleasant user experience the base of the ceiling mounting support. This will provide additional protection in case the connectors of the mounting - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 10
menus ●●Digital keystone correction to correct distorted images ●●RS-232 interface supports serial control ●●The power saving mode reduces the lamp power consumption by of pre-set color surfaces Note ●● The information in this manual is subject to change without notice. ●● Without the express written - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 11
cable Projector On Off COMP VIDEO HDMI Auto Sync Source Aspect Freeze Pattern Blank PgUp PgDn Color Mode Remote control battery Power cord Quick Start Guide 4 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 12
External appearance of the projector Front / rear Side Top / bottom SOURCE MENU EXIT ENTER Warning ● This equipment must be connected to ground. ● convenience. If failures or errors occur during equipment operations, use the power interruption device to cut the power or unplug the power cable - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 13
indicator message". 4. (LAMP LED indicator) Please refer to "LED indicator message". 5. SOURCE A source selection bar displays. 6. / (Keystone button) Manually corrects distorted images resulting from an angled projection. Left/Right/Up/Down (Navigation button) Selects the required menu - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 14
4. Keystone button and direction the previous and next functions. button / 11. Eco Mode The bulb mode is switched from the Manually corrects distorted images normal, power saving, dynamic to resulting from an angled projection. super environmental protection. Left/Right/Up/Down Selects - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 15
16. Source A source selection bar displays. 21. (Zoom out) The displayed zoom lever can be used 17. Enter to zoom out the projected image Enter the selected screen to display (OSD) menu item. 22. (Volume+) Increase the volume. 18. Exit Goes back to the previous OSD menu. Exits and saves menu - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 16
Remote control code The projector is capable of having 8 different remote control codes (1 to 8). When using multiple projectors close to each other at the same time, switching the remote control codes will prevent projector disruption by other remote controls. First set the projector's remote - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 17
Using the remote control cursor Use the remote control to operate your computer during presentations for greater flexibility. 1. Before using the remote control to replace your cursor, fix one end of the USB cable to the projector Mini USB port and the other end to the PC or notebook computer. See " - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 18
, sauna, solarium or car. ●●Replace only with the same or equivalent type recommended by the battery manufacturer. ●●Refer to the manufacturer's instructions and local environmental regulations to dispose of old batteries. ●●Do not throw batteries into fires. There may be danger of an explosion - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 19
Projector Positioning Choosing a location You may refer to the room layout or personal preference to determine the location of installation. Considerations include size and position of the screen, location of a suitable power outlet, as well as the location and distance between the projector and - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 20
Projection Dimension Refer to the chart below to determine the screen size and projection distance. Diagonal size High Screen Center of lens Wide Projection distance Vertical offset PA502S/PA502SP/PA502X/PA502XP Diagonal [Inch (mm)] 50 (1270) 60 (1524) 70 (1778) 80 (2032) 90 (2286) 100 (2540 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 21
Connection When connecting a signal source to the projector, be sure to: 1. Turn all devices off before making any connections. 2. Use the correct signal cables for each source. 3. In the connections shown below, some cables may not be included within the projector packaging (please refer to " - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 22
key labeled with the CRT/LCD or monitor icon on the notebook. Press the FN key and the labeled function key. Please refer to the instruction manual provided with the notebook computer for the combination keys and their functions. 15 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 23
Connecting to Video source devices You can connect the projector to any of the following video source device with an output jack: • HDMI (PA501S does not have this interface) • Component video • Video (composite video) Only 1 of the aforementioned connection methods is required to connect the - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 24
Connecting to HDMI devices Use an HDMI cable to establish a connection between the projector and HDMI device. 1. Connect one end of the HDMI cable to the HDMI output jack on the video device. 2. Connect the other end of the cable to the HDMI signal input jack on the projector. In the unlikely event - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 25
Connecting to composite video source devices Examine your Video source device to determine if an unused composite output jack is available: • If so, you can continue with this procedure. • If not, you will need to reassess which method to use to connect to the device. 1. Take a Video cable and - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 26
). Press Power to switch on the projector. If this is the first time that you've switched on the projector, please refer to on-screen instructions and select your OSD language. Switch on all connected equipment. The projector will then begin a search of the input signals. The lower right corner of - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 27
1. Press Menu and then press the remote 2. Press Menu and then press the remote control / to select the Display and control / to select Image and press press to select the screen color. to select the color mode. 3. Press Menu and then press the 4. Press Menu and then press the remote - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 28
enter another 6-digit password. You may use the password recall procedure if you forgot your password and did not record it in this manual. See "Entering the password recall procedure" for details. If you enter an incorrect password 5 times in succession, the projector will automatically shut down - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 29
hold the [Auto Sync] button on the remote control for 3 seconds. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase to verify that you are an authorized user of the projector - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 30
menu is switched ON. You may also press the source selection button on the remote control or search for available input signals to manually select the desired signals. 1. Press [Source] to display the source selection column. 2. Keep pressing the / until you arrive at the desired signal, then - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 31
Changing HDMI input settings In the unlikely event that you connect the projector to a device (such as DVD or Bluray player) via the projector's HDMI input jack, and the projected picture displays the wrong colors, please change the color space settings to one that complies with the color space - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 32
peg may be used to adjust projection height and projection angle along the vertical axis. The user may turn the adjustment support peg to make fine adjustments to projection angle and position of the projected image until it reaches the desired location. 1 Lift and adjust the feet - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 33
Keystone distortion is a problem where the projected image becomes trapezoidal in shape (keystone distortion) as a result of poor projection angle. To correct this situation, you should adjust projector height and use the following steps to correct the issue manually. ●● Using the remote - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 34
Zoom out to see details You may need to expand the image to inspect details in the projected image. Use the arrow keys to move the images. ●● Using the remote control 1. Press the on the remote to bring up the Zoom Bar. 2. Press repeatedly to expand the image to the desired dimension. 3. To browse - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 35
About the aspect ratio Choose how to make the screen suitable for the screen: 1. Auto: projector's natural resolution in its horizontal width. This is suitable where the incoming image is neither in 4:3 nor 16:9 aspect ratios Image 16:10 but where you want to make most use of the screen without - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 36
Optimizing the image Selecting a picture mode To select an operation mode that suits your need, please follow the steps described below. ● Press [Color Mode] repeatedly until you arrive at the mode you desire. ● Enter Image > Color mode menu and press / to select the required mode. Picture modes - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 37
Fine-tuning of image quality in user modes You may use several user-defined functions if the projector detects certain signal types. You can make adjustments to these functions based on your needs. Adjusting Brightness Enter Image > Brightness menu and then press /. The higher the value, the - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 38
Adjusting Brilliant Color Enter Image > Advanced > Brilliant Color menu and press /. This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors of the projected image. Brightness levels of mid-tone - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 39
Color Management Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjusent to allow for more accurate color reproduction, should you require it. - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 40
Setting the Presentation Timer The presentation timer can indicate the presentation time on-screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Enter Basic > Presentation Timer menu. 2. Press [Enter] to show the Presentation - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 41
Hiding the image In order to draw the audience's attention to the presenter, you may press Blank to hide the screen image. Press any key on the projector or remote to restore the image. After hiding the image, the lower right corner of the screen will display the text [Blank]. You can go to Basic > - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 42
Reset Lamp Timer Set the lamp hours to zero. Lamp Usage Timer Displays the time (hours) that the lamp has been running. Extending lamp life The projector lamp is a consumable item. To extend the lamp life, you can make the following settings in the OSD menu. Setting Lamp Mode Use the Eco mode to - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 43
2. Press Enter to display the Smart Energy page. 3. Select Eco. Press / and select Enable. 4. When Enable is selected, the projector lamp will be changed to Eco mode 5 minutes after no signal is detected. If the projector has not detected the signal after 20 minutes, its lamp power will be changed - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 44
switch to 3D projection. Under other circumstances, you may need to manually select the 3D Sync format to ensure that the proper projection of 3D you may set the 3D Sync Invert function to [Invert] to correct this problem. Switch off the projector 1. Press the message will disappear if you do not - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 45
Menu operations Menu system Please note that the on-screen display (OSD) menu may vary according to the type of signal received. The projector must detect at least one valid signal in order to use the menu items. If no device has been connected to the projector or if no signal has been detected, - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 46
Main menu 3. Power Management 4. Basic Auto Power On Sub-menu Direct power on Auto Power Off Smart Energy Sleep Timer Smart Restart Quick Power Off Audio Settings Power Saving Mute Volume Timer Period Timer Display Presentation Timer Timer Position Timer Counting Direction Start Counting - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 47
Main menu Language Sub-menu Projector Position 6. System 7. Information Menu Settings High Altitude Mode Quick Auto Search Security Settings Panel Key Lock Remote control code RS232 Baud Rate • Source • Color Mode • Resolution • Color System • Firmware Version • 3X Fast Input Menu Display Time - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 48
Description of each menu Function Screen Color Aspect Ratio Keystone Position Description See "Using Screen Color" for details. See "Selecting the aspect ratio" for details. See "Perform keystone correction" for details. Displays the position adjustment page. To move the projected image, use the - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 49
2. Image menu Function Advanced Reset color settings Auto Power On Smart Energy Smart Restart Quick Power Off Color Description See "Adjusting Color" for details. Tint See "Adjusting Tint" for details. Sharpness See "Adjusting Sharpness" for details. Gamma See "Selecting a Color - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 50
4. Basic menu Function Audio Settings Presentation Timer Pattern Blank Timer Message Splash Screen 3D settings HDMI settings Lamp Settings DCR Closed Caption Reset settings Description Mute Muting the sound. Volume Adjusting the sound level. See "Setting the Presentation Timer" for details. The - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 51
6. SYSTEM menu Function Language Projector Position Menu Settings High Altitude Mode Quick Auto Search Security Settings Panel Key Lock Remote control code RS232 Baud Rate Current System Status Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" for details. - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 52
-based detergents. These can damage the case. Storing the projector Follow the instructions below to store the projector for an extended time: ●●Make sure the dealer for details of the recommended range. ●●Retract the projector support pegs. ●●Remove the battery from the remote control. ●●Pack the - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 53
LED Indicator Projector status Stand-by mode Normal Operations Temperature 1 Temperature 2 Fan Error 1 Fan Error 2 Fan Error 3 Color Wheel Error Lamp abnormal Lamp-Lit error cooling Temperature Error Power indicator BLUE Before turning on, constantly lit after flashing for ten seconds BLUE BLUE - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 54
Troubleshooting Projector is not shutting down Cause There is no power from the power cable. Attempting to turn the projector on again during the cooling process. - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 55
● ● Not all projector models are available at your location. PA502S PA502SP Input Terminals 1 VGA Input (DB 15 pin) x1 x1 2 HDMI (v1.4) x1 x1 3 Video (RCA) x1 x1 4 Audio In(3.5mm mini jack) x1 x1 Output Terminals 1 Audio Out (3.5mm mini jack) x1 x1 2 USB (Type A) 5V/1A x1 x1 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 56
Dimensions 75.2mm 320.0mm 122.7mm 95.6mm 209.8mm SOURCE MENU EXIT ENTER Ceiling mount installation 27.1 175.0 3.0 104.9 3.1 Note hole. (M4/ L8 x 4) 49 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 57
Timing chart Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ UXGA WSXGA+ HD MAC 13" MAC 16" MAC 19" MAC 21" HDTV (1080p) Analog RGB Resolution (pixels) Aspect Ratio 640x480 4:3 800x600 4:3 1024x768 4:3 1152x864 4:3 1280x768 15:9 1280x800 16:10 1360x768 16:9 1366x768 16:9 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 58
Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WSXGA+ HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV(480p) SDTV(576p) SDTV (480i) SDTV (576i) HDMI Resolution (pixels) Aspect Ratio 640x480 4:3 800x600 4:3 1024x768 4:3 1280x768 15:9 1280x800 16:10 1360x768 16:9 1366x768 16:9 1280x960 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 59
for side by side, Top and Bottom, and Frame Sequential formats. ** 120Hz signal only supports the frame Sequential format. *** The video signal (SDTV 480i) supports only the frame Sequential format. HDMI 3D Within frame packing formats Signal Resolution (pixels) Aspect Ratio 1080p 1920x1080 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 60
Signal HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV(480p) SDTV(576p) SDTV (480i) SDTV (576i) Component video Resolution (pixels) Aspect Ratio 1920x1080 16:9 1920x1080 16:9 1280x720 16:9 720x480 4:3/16:9 720x576 4:3/16:9 720x480 4:3/16:9 720x576 4:3/16:9 Refresh rate (Hz) 50/60 50/60 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 61
system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic. Disclaimer ViewSonic does not make any statement or warranty, expressed or implied - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 62
Appendix IR control table Button PgDn PgUp Blank Auto Sync Up Down Left Right Color mode Mute Input Powering up Power Off Exit Eco mode Menu Source Pattern Video HDMI Volume+ VolumeZoom Zoom in Freeze Aspect COMP Information Format NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 63
Address Code Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 83F4 93F4 A3F4 B3F4 C3F4 D3F4 E3F4 F3F4 RS232 command table Pin Description Pin 1 NC 2 3 TX 4 5 GND 6 7 RTSZ 8 9 NC Description RX NC NC CTSZ Baud Rate Data - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 64
FUNCTION Power supply Reset Splash Screen High Altitude Mode Lamp Mode Status Write Read Write Read Write Read Write Operation Activate Off Power status (ON/OFF) Execute Splash Screen - Black Splash Screen - Blue Splash Screen ViewSonic Splash Screen - OFF Splash Screen - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 65
Projector Position Write Read 3D Sync Write 3D Sync Invert Contrast Brightness Read Write Read Write Read Write Read Front Table Rear Table Real ceiling Front ceiling Projector Position status Off Frame Sequential Frame Packing Top-Bottom Side-by-Side 3D Sync Status Off On 3D Sync Invert - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 66
Aspect ratio Auto Adjust Horizontal position Vertical position Temperature Color Blank Keystone Correction - Vertical Write Read Write Read Write Read Write Read Write Read Write Read Aspect ratio Auto Aspect ratio 4:3 Aspect ratio 16:9 Aspect ratio 2.35:1 Aspect Ratio Execute 0x06 0x14 0x00 0x04 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 67
Color mode Primary color Hue Saturation Gain Freeze Write Read Write Read Write Read Write Read Write Read Write Read Brightest Movie Standard 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x00 0x69 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x01 0x6A 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x06 0x6F - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 68
Source input Quick Auto Search Write Read Write Read Input source VGA 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x00 0x60 Input source HDMI 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x03 0x63 Input source Composite video 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x05 0x65 Source 0x07 0x14 0x00 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 69
Language Write Read ` ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL Svenska Nederlands Türkçe Čeština Português ไทย Polski Suomi Indonesian Tiêng Viê.t Language 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x01 0x62 0x06 0x14 0x00 0x04 0x00 0x34 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 70
HDMI Format HDMI range Brilliant Color Write Read Write Read Write Read RGB 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x00 0x85 YUV 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x01 0x86 Auto 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x02 0x87 HDMI Format status 0x07 0x14 0x00 0x05 0x00 0x34 0x00 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 71
Remote control code Screen Color Overscan Write Read Write Read Write Read Code 1 0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x00 0xA0 Code 2 0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x01 0xA1 Code 3 0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x02 0xA2 Code 4 0x06 0x14 0x00 0x04 0x00 0x34 0x0C - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 72
Remote Key Write Menu Exit Up Down Left Right Source Input Auto 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0C 0x5E 0x02 0x14 0x00 0x04 0x00 0x34 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 73
880 818 NZ= 0800 008 822 [email protected] T= 1-866-463-4775 [email protected] http://www.viewsoniceurope.com/eu/support/call-desk/ T= 852 3102 2900 [email protected] T= 1800 419 0959 [email protected] T= 080 333 2131 [email protected] C= http://www - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 74
other acts of nature, improper maintenance, unauthorized product modification, or failure to follow instructions supplied with the product. b. Operation outside of product specifications. c. Operation of does not relate to a product defect. 3. Removal, installation, and set-up service charges. 67 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 75
(please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 76
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. A ny damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 77
39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800 - ViewSonic PA502S - 800 x 600 Resolution 3 500 ANSI Lumens 1.97 - 2.17 Throw Rati - Page 78
![](/manual_guide/products/viewsonic-pa502s-800-x-600-resolution-3-500-ansi-lumens-197-217-throw-ratio-user-guide-a7f095d/1.png)
PA502S
/
PA502SP
/
PA502X
/
PA502XP
DLP Projector
User Guide
Model No. VS16970/VS16971
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”