ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio
ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio Manual
![]() |
View all ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio manual content summary:
- ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 1
in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found de operar su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS16953 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 2
Thank you for choosing ViewSonic As a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 3
installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 4
. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 5
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 6
, Greener Computing. Please visit ViewSonic website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/eu/support/call-desk/ Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx iv - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 7
to Projector 4 Connect Laser Module to Projector 5 Adjust Laser Module 6 PJ-vTouch-50S Software Installation 8 Startup Calibration Software Calibration Menu Display 10 Automatic Calibration 14 Manual Calibration 14 Troubleshooting Guide Customer Support v - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 8
Packaged Items Laser Module unit Mini USB (6m) x 1 Mini USB (2m) x 1 x 1 vTouch PJ-vTouch-50s 3 Quick Start Guide 1 Magnet Laser x Important 2 3 cm IR Pen x 2 4 Quick start guide Gears For LaserAlignment Gears A Gears B 中国 http://www.viewsonic.com.cn 电话:4008 988 588 香港 http://www.hk - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 9
IR Pen Battery Installation IR Pen uses two AAA batteries. 1. Twist off the top cover of the pen. 2. Insert two AAA batteries into the pen. 3. Twist the top cover of the pen back on. Replace the battery when the pen begins to function incorrectly. Notes for Using IR Pen • Improper usage of the IR - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 10
Setup Procedure Laser Module Installation Install the Laser module approximately 3~5 centimeters above the projection surface and align it with the center of the image. This product is equipped with magnets that allow it to be attached to a whiteboard directly. If the module needs to be installed in - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 11
Connect Computer to Projector Connect a computer to the projector via a VGA or HDMI cable for image display. Use the 6m standard USB cable to connect the computer (USB) and projector (mini USB) for positioning and focus adjustment. 4 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 12
Connect Laser Module to Projector Connect the Laser Module (mini USB) to the projector (mini USB) using the included 2m USB cable. The indicator light will turn red once the Laser Module is working correctly; if the indicator light has not turned red, this means that the Laser Module is still not - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 13
Adjust Laser Module 1. Loosen the screw on the laser module 2. Slide the top cover off of the laser module. 3. Press the Laser button to switch the module on. A horizontal beam of laser light will appear to be used for calibration. Power Gears A Gears B 6 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 14
4. Check the distance between the whiteboard and the laser light. Use Gear B to adjust the distance between the laser beam and the whiteboard to ensure that the two are parallel. Gears B Gears B 5. Use Gear A to adjust the laser beam until the laser beam and the whiteboard are approximately 5mm - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 15
links. • PS750W: http://vsweb.us/ps750w • PS750X: http://vsweb.us/ps750x • PS750HD: http://vsweb.us/ps750hd 2. Double click "PJ-vTouch-50S.exe" and follow the instructions below to complete the installation. 8 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 16
9 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 17
Startup Calibration Software Double click the IWB icon to run PJ-vTouch-50S software Calibration Menu Display Operation Menu List 1. Run: Turn on the camera 2. Stop: Turn the camera off 3. Parameter Settings: Image sensor setting 10 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 18
that auto-calibration fails, users can provide this recorded video to customer service. 3.3 Other Setting • Focal length: For PS750 series, the default functioning abnormally, Manual Mask Area will mask interference spots. 6. Manual Calibration: Execute calibration manually when Automatic - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 19
8. Lightspot Sampling: Lightspot sampling collection is to be performed after calibration has been completed. Use finger or IR pen to touch the red square until it turns green; repeat this until the process has been completed. Once the cursor is working smoothly, execute Lightspot Sampling. 9. - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 20
3*3mm. 3. Normal Usage Image Mode: After calibration, all operations can be done by finger instead of the mouse. 4. Mouse: Only supports single touch. 5. Touch Pad: Supports up to 10-point simultaneous touch. 6. Touch Screen Aspect Ratio: Auto / 4:3/ 16:10/ 16:9. This setting needs to be the same - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 21
has been completed; if Automatic Calibration has failed, the "Auto Calibrate Failed" message will appear. In this event, please refer to the Troubleshooting Guide. Manual Calibration 1. Touch the four corners of the projection screen with your finger or the IR Pen. Make sure the light spots are - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 22
the cross in the middle of each dot. 4. Once calibration has been completed successfully, the calibration software will minimize onto the task tray; if the Manual Calibration has failed, please refer to Troubleshooting Guide. 15 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 23
Troubleshooting Guide 1. Finger touch the projector camera and the computer. (4) If there is no problem with the connection, please reconnect to another USB port. 2. After correctly. (2) Redo Automatic Calibration. (3) Redo Manual Calibration. 5. Manual Calibration failure (1) If light spots are - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 24
Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected] Canada www.viewsonic.com T= 1-866-463-4775 [email protected] Europe www.viewsoniceurope.com http://www.viewsoniceurope.com/eu/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 - ViewSonic PS750HD - 1920 x 1080 Resolution 3 300 ANSI Lumens 0.22 Throw Ratio | - Page 25
![](/manual_guide/products/viewsonic-ps750hd-pjvtouch50s-user-guide-english-645c33c/1.png)
PJ-vTouch-50s
Projector Interactive Kits
User Guide
Model No. VS16953
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”