ViewSonic SW-216 Signage Manager CMS Setup

Signage Manager Setup for

CDE8620/CDE7520/CDE6520/CDE5520/CDE4320

IMPORTANT NOTE:

If you purchased SW-216 Signage Manager licenses, please send the LAN MAC

Address of your CDE displays to ViewSonic so it can be added to our activation servers.

Software will

not activate if this is not fulfilled.

Equipment needed

-

USB Stick (2GB or larger)

-

Keyboard and Mouse (Wireless preferred)

-

Display Remote Control

-

Windows 10 PC to run Signage Manager CMS

Application:

-

Console and Player APK files (included in this zip package)

-

Signage Manager for Windows -

Signage Manager Download

Setting up the Display for Signage Manager

1)

Turn on the display and follow the initial setup on the screen.

2)

Press the Menu button the remote control and go to Advanced menu.

a.

Power Save = Mode 3

b.

ECO Mode = OFF

c.

Boot Logo = OFF

d.

Auto Signal Detection = OFF

e.

No Signal Standby = OFF

f.

Switched On State = Forced On

3)

Press the Home Button on remote control then click Settings

a.

Network – make sure you have connection to the internet, either by Wired or

Wireless LAN

b.

Device – Signage Display

i.

Check Unknown Source

c.

System – About

i.

Online System Updates – Turn Off Automatic Update

Installing the Signage Manager APK’s

1)

Copy the two APK files on a USB Stick formatted with FAT32

2)

Insert the USB Stick to an open USB Port in the back of the display

3)

Using the remote, click Home and then Folders