Viking VDB325SS Installation Instructions

Viking VDB325SS Manual

Get Viking VDB325SS PDF manuals and user guides View all Viking VDB325SS manuals
Add to My Manuals
Save this manual to your list of manuals

Viking VDB325SS manual content summary:

  • Viking VDB325SS | Installation Instructions - Page 1
    Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com F20828 EN Professional & Designer 200/325E/450E Series Built-In Dishwashers (
  • Viking VDB325SS | Installation Instructions - Page 2
    for Leaks 21 Final Preparation 21 Service & Registration 22 IMPORTANT-Please Read and Follow! • Before beginning-please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or rating plates from the dishwasher. This may void warranty or create
  • Viking VDB325SS | Installation Instructions - Page 3
    instructions, can result in death, fire or electrical shock. WARNING Tip Over Hazard Do not use dishwasher used if required by NFPA-70 (National Electric Code), federal/state/local laws, or local ordinances. • or moisture. • Viking Range Corporation will NOT warranty any problems resulting from GFI
  • Viking VDB325SS | Installation Instructions - Page 4
    ) 23-3/4" (60.3 cm) 23-1/8" (59.0 cm) Cabinet Flush 6 Panel Flush Specifications Built-In Dishwasher Description Overall width Overall height from floor Overall depth from rear-Professional 200/325E/450E Models 23-7/8" (60.6 cm) 33-7/8" (86.0 cm) min. to 35" (89.0 cm) max. To edge of side
  • Viking VDB325SS | Installation Instructions - Page 5
    Custom Door Panel (Specifications for FDB200/DFB450E Models) 10" (25.4 cm) 11-17/32" (29.3 cm) Option) Have the overlay panel constructed per dimensions. The panel thickness MAY NOT exceed 5/8" MUST BE stainless steel to avoid corrosion. If dishwasher has a metal door skin installed, remove the
  • Viking VDB325SS | Installation Instructions - Page 6
    Information • Read these instructions carefully and completely before installing the dishwasher. The installation should be carried out by a qualified installer, who is familiar with all local codes and ordinances for electrical and plumbing connections. If the dishwasher is being installed for
  • Viking VDB325SS | Installation Instructions - Page 7
    . NOTE: Be careful not to pinch hoses or power cord beneath dishwasher. c Remove bottom pan and front plate. Rapid removal of the bottom pan will cause damage to the moisture sensor. To remove the bottom pan for installation and servicing, slowly pull the bottom pan from the unit and disconnect the
  • Viking VDB325SS | Installation Instructions - Page 8
    , remove the 6 screws (3 per side) holding side trim on. Shift the side trim forward. Use rear hole on side trim and the same hole on dishwasher to reattach trim. If needed, attach wiper gasket by pulling protective film off adhesive back on wiper gasket and apply behind hemmed edge of side
  • Viking VDB325SS | Installation Instructions - Page 9
    the brackets will already be in the base. NOTE: Be careful not to pinch hoses or power cord beneath dishwasher. 2 To adjust the depth of the kick plate, loosen screws on the bracket and position in the required and right adjust side to side and center adjusts front to back. (Select models only) 17
  • Viking VDB325SS | Installation Instructions - Page 10
    . To level center rear leg, see Step 5a. Front Panel Removed 18 Installation Procedure (cont'd.) 7 7b Attach screws through trim pieces into cabinets. (select models). 8 Minimum 20" (50.8 cm) from floor Install High Loop Clip, which is provided, a minimum of 20" (50.8 cm) from the floor. 10A
  • Viking VDB325SS | Installation Instructions - Page 11
    (select models only) and install kick plate. Performance Checklist Testing for Leaks A qualified installer should carry out the following checks: h Remove packaging and parts. h Turn on the water supply and check for leaks. h Turn the power on at breaker/fuse box and test the dishwasher operation
  • Viking VDB325SS | Installation Instructions - Page 12
    the appliance. Do not repair or replace any part of the appliance unless specifically recommended in the manual. All servicing should be referred to a qualified technician. Contact Viking Range Corporation, 1-888-VIKING1 (845-4641), for the nearest service parts distributor in your area or write to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20828 EN
(040511)
Professional & Designer 200/325E/450E Series
Built-In Dishwashers
Viking Installation Guide