Home » Vtech Manuals » Corded Phones » Vtech SBS-SB0 » Manual Viewer

Vtech SBS-SB0 User Manual

Vtech SBS-SB0 Manual

View all Vtech SBS-SB0 manuals

Add to My Manuals
Save this manual to your list of manuals

Vtech SBS-SB0 manual content summary:

Vtech SBS-SB0 | User Manual - Page 1
Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. CM18245/ AM18247 4-Line Small Business System Deskset BC User's manual
Vtech SBS-SB0 | User Manual - Page 2
read the Important safety information. This user's manual provides you with the complete installation, setup and operation instructions. For customer service or product information, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377. Model
Vtech SBS-SB0 | User Manual - Page 3
servicing instructions that may appear in this user's manual phone is located in an environment containing concentrations of flammable or flame-supporting Troubleshooting section on pages 70-73 of this user's manual. If you cannot solve the problem 1 (800) 595-9511. In Canada, dial 1 (800) 267-7377.
Vtech SBS-SB0 | User Manual - Page 4
hydride rechargeable batteries when taken out of service within the United States. These batteries batteries. RBRC® and 1-800-8-BATTERY® are registered trademarks of the Rechargeable Battery Recycling Corporation. and implanted cardiac pacemakers. Supported by the U.S. Food and INSTRUCTIONS ii
Vtech SBS-SB0 | User Manual - Page 5
and original packaging in the event warranty service is necessary. Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. CM18245/ AM18247 4-Line Small Business System Deskset BC User's manual User's manual Go to www.vtechphones.com to
Vtech SBS-SB0 | User Manual - Page 6
6 Tabletop to wall installation 6 Wall to tabletop installation 7 Add and register a deskset 8 Add a corded headset (Optional 9 Deskset overview 10 Deskset icon display 16 Alert tones and lights 17 Telephone settings Deskset setup 18 Menu settings 18 Ringer volume 18 Ringer tone 19 Do not
Vtech SBS-SB0 | User Manual - Page 7
Reasons for missing caller ID information 56 Answering system Private mailbox setup 57 Activate private mailbox 57 Number of rings 57 Voice language Troubleshooting 70 Maintenance 74 FCC part 68 and ACTA 75 FCC part 15 76 California Energy Commission battery charging testing instructions
Vtech SBS-SB0 | User Manual - Page 8
console and register this deskset to the console before use. Install and set up CM18445/AM18447 console first before expanding your system with this CM18245/AM18247 deskset. Phone lines DECT CM18445 console (Ext. 0) CM18245 deskset (Ext. 1, 2, 3...) Optional 2.5mm corded headset (purchased
Vtech SBS-SB0 | User Manual - Page 9
supplied rechargeable battery or replacement battery (model BT266342). To order a replacement battery, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377. 2
Vtech SBS-SB0 | User Manual - Page 10
Getting started Backup battery charging When the deskset loses power with the backup battery installed, the screen indicates the battery status (see the following table). The backup battery is fully charged after 16 hours of continuous charging. See the table on page 82 for battery operating times.
Vtech SBS-SB0 | User Manual - Page 11
Getting started Deskset installation 1. Install the mounting bracket for tabletop use. Low tabletop position: Insert the fixed tabs of the mounting bracket into slots A and B . Press the flexible tabs into slots C and D until they click into place. C D A B D C B A D B Low tabletop position
Vtech SBS-SB0 | User Manual - Page 12
outlet not controlled by a wall switch. Raise the antenna for optimum wireless range and performance. Plug the end of the coiled handset cord into the jack visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377. • The power adapter is intended to
Vtech SBS-SB0 | User Manual - Page 13
Getting started Wall mount installation (Optional) Tabletop to wall installation To install your deskset in the wall installation position, make sure you first unplug the power adapter from the electrical outlet. 1. Place your corded handset aside. Use a coin to rotate the handset tab 180 degrees.
Vtech SBS-SB0 | User Manual - Page 14
5. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch. Wall to tabletop installation Follow the instructions below to return the deskset from wall installation to tabletop position. 1. Remove the deskset from the wall. Unplug the power adapter cord from
Vtech SBS-SB0 | User Manual - Page 15
number, ranged from 1 to 9). It takes up to 60 seconds to complete the registration process. 6. Lift the handset. If you hear a dial tone, the registration was successful. 1) Press MENU on Console ->Registration ->Register Ext. Registering... Directory Call log Ringer setting Console setup Line
Vtech SBS-SB0 | User Manual - Page 16
deskset. ) jack on the side of the MS2085 Engraving: NOTE: The HEADSET button on the deskset controls only the corded headset. For more details on the operation of the corded headset, refer to the user's manual of the corded headset. Use only Supplied 5.1 Adapter L4 L3/4 L2 L1/2 9
Vtech SBS-SB0 | User Manual - Page 17
Getting started Deskset overview MESSAGE WAITING indicator • On when there are new messages in the private mailbox. LINE 1-LINE 4 keys • Press to make or answer a call on the desired line. ANS SYS • Press to enter the answering system menu. DELETE • While playing a message, press to delete the
Vtech SBS-SB0 | User Manual - Page 18
to turn the feature on. Press again to turn off. SPEAKER • Press to turn on the speakerphone. Press again to turn it off. HEADSET • When a corded headset is connected to the deskset, press to make, answer or hang up a call. +/VOL/- • During a call, press to adjust the listening volume. • During
Vtech SBS-SB0 | User Manual - Page 19
Getting started Deskset overview Directory card Use the directory card to record the names of the speed dial numbers you stored. To write names on the directory card: 1. Write the information on the directory card that comes with the package. 2. Insert the edge of the directory card in the slot at
Vtech SBS-SB0 | User Manual - Page 20
The > symbol highlights a menu item. Main menu • Directory • Call history • Ringer setting • Deskset setup • Speed dial • User support • Deskset info • Factory reset >Directory Call history Ringer setting Deskset setup Answering system menu • Play messages • Mailbox On/Off • Record memo • Gen MB
Vtech SBS-SB0 | User Manual - Page 21
menu of the deskset. Table 1 - Main menu (Press MENU/SELECT in idle screen) Menu Directory Call history Ringer setting Deskset setup Speed dial User support Deskset info Factory reset Description Reference Review, add or delete directory entries. Pages 45-49 Review, delete call history entries
Vtech SBS-SB0 | User Manual - Page 22
Getting started Deskset overview Table 2 - Answering system menu (Press ANS SYS in idle screen) Menu Play messages Mailbox On/Off Record memo Gen MB Settings Remaining time Delete all old Description Reference Play messages in the private mailbox. Pages 63-64 Turn on or off the private mailbox,
Vtech SBS-SB0 | User Manual - Page 23
Conf. LOWER Ringer off - On steadily when the ringer volume is set to OFF or the do not disturb function is on. Headset - On steadily when using a corded headset. Backup battery indicator - Shows the backup battery status. Microphone is muted. On steadily when the call privacy feature is set to On
Vtech SBS-SB0 | User Manual - Page 24
not disturb) • On when the do not disturb feature is on. MUTE • On with the microphone is muted. SPEAKER • On when the speakerphone is on. HEADSET • On when the corded headset is in use. 17
Vtech SBS-SB0 | User Manual - Page 25
to be changed. The > symbol indicates the selected menu item. 3. Press MENU/SELECT or /SKIP to select the menu item. 4. Press CANCEL to exit setup without making changes. NOTE: Press CANCEL to cancel an operation, exit the menu display, or return to idle mode. Ringer volume Use this feature to
Vtech SBS-SB0 | User Manual - Page 26
Telephone settings Deskset setup Ringer tone Use this feature to choose one of the ten ringer tones for incoming calls. You can choose different ringer tones for different lines
Vtech SBS-SB0 | User Manual - Page 27
the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press MENU/SELECT again or press When the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press or to scroll to Key tone
Vtech SBS-SB0 | User Manual - Page 28
desksets are independent. By default, the language is set to English. 1. When the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press or to scroll to LCD Language, then press MENU/SELECT or /SKIP. 4. Press or to select English, Fran
Vtech SBS-SB0 | User Manual - Page 29
the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press or to scroll to Call When the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press or to scroll to Hold reminder
Vtech SBS-SB0 | User Manual - Page 30
the deskset is idle, press MENU/SELECT. 2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP. 3. Press or to scroll to Deskset name to reset all settings of this deskset to their default settings. All phone settings, directory, caller ID history, redial list, speed dial memory,
Vtech SBS-SB0 | User Manual - Page 31
setup for more details, refer to the Ring group section in the user's manual of CM18445/AM18447 console. 1. When the deskset is idle, press MENU . User support Use this feature to display the VTech website. 1. When the deskset is idle, press MENU/SELECT. 2. Press or to scroll to User support, then
Vtech SBS-SB0 | User Manual - Page 32
to hang up. NOTE: The elapsed time is not affected by accessing services from your telephone service provider. To make a call using a corded headset: Make sure a corded headset is connected to the deskset (page 9). 1. Press HEADSET on the deskset. 2. Wait for a dial tone, then dial the number
Vtech SBS-SB0 | User Manual - Page 33
place the handset on the deskset to hang up. Answering a call Lift the handset, or press the corresponding line key (LINE 1-LINE 4), SPEAKER or HEADSET on the deskset to answer an incoming call. Temporary ringer silencing When the telephone is ringing, you can temporarily silence the ringer of the
Vtech SBS-SB0 | User Manual - Page 34
levels for each of the listening options (corded handset, corded headset and speakerphone). All settings are independent. While on a again and resume speaking. Temporary tone dialing If you have pulse (rotary) service only, use this feature to temporarily switch pulse to touch-tone dialing during
Vtech SBS-SB0 | User Manual - Page 35
press HOLD. If you are using the corded headset, the headset turns off and the HEADSET key turns off automatically after you press HOLD. Music on hold section in the user's manual of CM18445/AM18447 console. NOTES: • The call privacy setting in Deskset setup menu remains unchanged after the call is
Vtech SBS-SB0 | User Manual - Page 36
Telephone operation Options while on calls Call privacy During a call, you can temporarily change the call privacy setting to allow or disallow other extensions to join the call. The original setting is automatically restored after you hang up or resume the call you put on hold. To turn call privacy
Vtech SBS-SB0 | User Manual - Page 37
Telephone operation Options while on calls Recording a call Use this feature to record a phone conversation during a call. The recording is treated the same as memos and is marked as a new message in the private mailbox. Listen to recorded conversation
Vtech SBS-SB0 | User Manual - Page 38
Telephone operation Options while on calls Chain dialing While you are on a call, you can initiate a dialing sequence from the numbers in the directory, caller ID history or redial list. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes)
Vtech SBS-SB0 | User Manual - Page 39
on the screen: • Lift the handset. -OR• Press SPEAKER or HEADSET. To override automatic line selection, press LINE 1-LINE 4 for the desired beginning or end. • You can store the flash signal required by some special services as part of a dialing sequence. Press FLASH and an F appears on the
Vtech SBS-SB0 | User Manual - Page 40
Telephone operation Redial To delete a number While the screen displays the desired number, press DELETE to delete the number from the redial memory. You hear a confirmation tone. Auto-redial Use this feature to automatically redial a number twice, with a 30 seconds countdown in between the two
Vtech SBS-SB0 | User Manual - Page 41
Telephone operation Conference call The system can support 6-party conference with a maximum of four outside calls and two system the call privacy of your deskset is set to On, follow the instructions of To turn call privacy off during a call on page 29 to turn off the setting temporarily.
Vtech SBS-SB0 | User Manual - Page 42
to join the conference in progress. • The flash signal in a dialing sequence is not available during a conference call. • The system does not support an internal conference of more than two system extensions. Options during a conference call To talk privately with one external party: 1. Press LINE
Vtech SBS-SB0 | User Manual - Page 43
Telephone operation Intercom You can use the intercom feature for conversations between this deskset and other system devices. Make an intercom call to an extension 1. Press INTERCOM on the deskset when it is idle. 2. Press or to scroll to a desired extension, then press MENU/SELECT or /SKIP. 3. The
Vtech SBS-SB0 | User Manual - Page 44
music that comes with the telephone system. To change the setting and for more details, refer to the Music on hold section in the user's manual of CM18445/AM18447 console. NOTES: • You can only hold one pair of intercom call. • The intercom call on hold is dropped after 15 minutes. Handle
Vtech SBS-SB0 | User Manual - Page 45
Telephone operation Call transfer You can transfer a call to any other system telephone. Only the recipient extension can answer the transferred call. Blind transfer While on a call, you can transfer a call directly without notifying the desired extension: 1. Press TRANSFER on the deskset while on a
Vtech SBS-SB0 | User Manual - Page 46
Telephone operation Call transfer using intercom Transfer a call and speak to the receiving party You can transfer a call and speak to the receiving party before completing the transfer while on a call: 1. Press INTERCOM on the deskset while on a call. 2. Press or to scroll to a desired extension,
Vtech SBS-SB0 | User Manual - Page 47
groups, press MENU/SELECT or /SKIP. 4. Press or to scroll to a desired group (Group 1-Group 3), press MENU/SELECT or /SKIP. 5. The registered extensions (apart from cordless headset and speakerphone) display. Use the dial pad to press an extension number if you want to add it to the group. • To
Vtech SBS-SB0 | User Manual - Page 48
Telephone operation Paging Make a paging call to multiple extensions 1. Press PAGE on the deskset when it is idle. 2. Press or to scroll to Group or All, press MENU/SELECT or /SKIP. • If you choose Group, press or to scroll to a desired group of extensions. Then, press MENU/SELECT or /SKIP. The
Vtech SBS-SB0 | User Manual - Page 49
32 speed dial locations where you can store and dial phone numbers or system extension numbers. You can store up default, pressing speed dial keys 1 to 10 will make an intercom call to the corresponding registered extension, as shown on the directory card. Assign a speed dial entry Use the following
Vtech SBS-SB0 | User Manual - Page 50
beginning or end. • You can store the flash signal required by some special services as part of a dialing sequence. Press FLASH and an F appears on the screen . NOTES: • The newly added phone number will also be saved to the directory. • If you want to edit the phone number of the speed dial entry,
Vtech SBS-SB0 | User Manual - Page 51
delete the speed dial entry for keys 1 to 10, it will reset to the default setting and serve as an intercom key to the corresponding registered extension. 44
Vtech SBS-SB0 | User Manual - Page 52
Directory About the directory Use the directory to store names and phone numbers. Directory entries are not shared with other extensions. The console and each deskset have their own directories. Capacity The directory of this deskset can
Vtech SBS-SB0 | User Manual - Page 53
the left or right. • Press or to move the cursor to the beginning or end. • You can store the flash signal required by some special services as part of a dialing sequence. Press FLASH and an F appears on the screen. 3. Press MENU/SELECT. The deskset displays Enter name. Use the dialing keys
Vtech SBS-SB0 | User Manual - Page 54
Directory Create directory entries Create a new directory entry (continued) -OR1. When the deskset is idle, press /DIR. 2. When a directory entry appears, press MENU/SELECT. • If the directory is empty, press MENU/SELECT and then go to step 4. 3. Press or to scroll to Add contact, then press MENU/
Vtech SBS-SB0 | User Manual - Page 55
Directory Search directory Search by name The names appear in alphabetical order. Follow the steps below to search for directory entries on the deskset. 1. Press /DIR on the deskset. The screen displays the first entry in the directory. 2. Press or to browse through the directory. 3. Use the dial
Vtech SBS-SB0 | User Manual - Page 56
the left or right. • Press or to move the cursor to the beginning or end. • You can store the flash signal required by some special services as part of a dialing sequence. Press FLASH and an F appears on the screen. 3. Press MENU/SELECT to save. The deskset displays Edit name. Use the
Vtech SBS-SB0 | User Manual - Page 57
Call history About the caller ID This telephone supports caller ID services that most telephone service providers offer. Caller ID allows you to see the name, number, date and time of calls. Depending on your service subscription, you might see the caller's number, or the caller's name and number
Vtech SBS-SB0 | User Manual - Page 58
to add Appears when there are new or missed calls. If you subscribe to caller ID service, this phone automatically resets the time and date using the caller ID information from the first incoming call after initial setup, or each time the power resumes after a power outage. NOTES: • The caller ID
Vtech SBS-SB0 | User Manual - Page 59
8005959511 11:00pm 12/21 New [SELECT] to add NOTE: The number you see on your caller ID is in the format from the telephone service provider. It usually delivers 10-digit telephone numbers (area code plus telephone number). The telephone system ignores the area code when searching for a match and
Vtech SBS-SB0 | User Manual - Page 60
Call history Caller ID operation View dialing options Although the incoming call history entries have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial the seven digits only, 1 plus the seven digits, or 1 plus the area CHRIS 8005959511 11:00pm 12/21 New [
Vtech SBS-SB0 | User Manual - Page 61
the left or right. • Press or to move the cursor to the beginning or end. • You can store the flash signal required by some special services as part of a dialing sequence. Press FLASH and an F appears on the screen. 3. Press MENU/SELECT to save. The deskset displays Edit name. Use the
Vtech SBS-SB0 | User Manual - Page 62
Call history Caller ID operation Delete entries To delete a call history entry: 1. When in the caller ID history, press or to browse to the number you wish to delete. 2. Press DELETE to delete the shown entry from the caller ID history. The screen displays Deleted. To delete all call history entries
Vtech SBS-SB0 | User Manual - Page 63
Call history Reasons for missing caller ID information There are also occasions when other information or no information shows for various reasons: On-screen message Reason PRIVATE NUMBER The number has been set as private. PRIVATE NAME The name has been set as private. PRIVATE CALLER Both the
Vtech SBS-SB0 | User Manual - Page 64
Answering system Private mailbox setup This deskset has a private mailbox that can answer calls and record messages when the auto attendant of the console if desired. To change the setting and for more details, refer to the Voice language section in the user's manual of CM18445/AM18447 console. 57
Vtech SBS-SB0 | User Manual - Page 65
only, then press MENU/SELECT or /SKIP. 4. Press or to scroll to Anncment setup, then press MENU/SELECT or /SKIP. 5. Press or to scroll to User anncment, , then press MENU/SELECT or /SKIP. 4. Press or to scroll to Anncment setup, then press MENU/SELECT or /SKIP. 5. Press or to scroll to User anncment
Vtech SBS-SB0 | User Manual - Page 66
/SELECT or /SKIP. 3. Press or to scroll to Mailbox On or Announce only, then press MENU/SELECT or /SKIP. 4. Press or to scroll to Anncment setup, then press MENU/SELECT or /SKIP. 5. Press MENU/SELECT or /SKIP to choose Default. The default announcement plays. 6. Press MENU/SELECT or /SKIP to save
Vtech SBS-SB0 | User Manual - Page 67
Answering system Private mailbox setup Message Length Use this feature to set the maximum length of each recorded message. The caller can record a message up to that specific time period. 1.
Vtech SBS-SB0 | User Manual - Page 68
Answering system Private mailbox setup Call intercept When a caller is leaving a message on your private mailbox, you can stop the recording and talk to the caller by pressing the corresponding
Vtech SBS-SB0 | User Manual - Page 69
Answering system Private mailbox setup Remaining time The maximum recording time of the deskset is 15 minutes. You can record up to 99 messages in the deskset. Use this feature
Vtech SBS-SB0 | User Manual - Page 70
Answering system Answering system operation New message indication The deskset displays XX New messages when there are new messages and/or memos in the private mailbox. The MESSAGE WAITING indicator on the deskset turns on when there are new messages in private mailbox. Call screening When the
Vtech SBS-SB0 | User Manual - Page 71
Answering system Answering system operation To listen to messages in the general mailbox: 1. While the deskset is idle, press ANS SYS. 2. Press or to scroll to Gen MB, then press MENU/SELECT or /SKIP. 3. Press MENU/SELECT or /SKIP to choose Play messages. 4. If you have only new messages or only old
Vtech SBS-SB0 | User Manual - Page 72
Answering system Answering system operation Delete all mailbox messages You can use delete all messages stored in the private mailbox or stored in the general mailbox. To delete all messages in the private mailbox: 1. When the deskset is idle, press ANS SYS. 2. Press or to scroll to Delete all old,
Vtech SBS-SB0 | User Manual - Page 73
Answering system Remote access Use this feature to reach your answering system remotely by calling any telephone line connected this deskset from any touch-tone telephone. Make sure the auto attendant feature of your CM18445/AM18447 console, and the private mailbox of the extension are turned on for
Vtech SBS-SB0 | User Manual - Page 74
. Please make sure the telephone system is not in use before deregistration. NOTES: • After deregistration, you cannot use the deskset unless you register it to the console again. • All messages in the private mailbox of your deskset will be removed after deregistration. To deregister a deskset
Vtech SBS-SB0 | User Manual - Page 75
Appendix Deskset display screen messages All calls deleted. All group settings clear. All old msgs deleted. Call history empty Calling: Conf. Contact saved Deleted Directory empty Directory full Ended Extension busy Intercom ---Intercom--Intercom in use Line in conf. All Caller ID histories are
Vtech SBS-SB0 | User Manual - Page 76
Appendix Deskset display screen messages Line user's intercom in use Line X ---Line X--Incoming call Line X transferred to Memory full Message transferred to extension X Number already saved Paging... Private call Redial empty Reset deskset... System busy. Try again later XX Missed calls XX New
Vtech SBS-SB0 | User Manual - Page 77
Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada press HEADSET, make sure the corded headset is same problem, contact your telephone service provider
Vtech SBS-SB0 | User Manual - Page 78
not off. Refer to Ringer volume on page 18 in this user's manual. • Make sure the power cord or the backup battery is plugged problem, contact your telephone service provider. • Test a working telephone at the telephone jack. If another telephone has the same problem, contact your telephone service
Vtech SBS-SB0 | User Manual - Page 79
Troubleshooting System does not receive caller ID when on a call. • Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID feature works only if both you and the caller are in areas offering caller ID service, and if both telephone service
Vtech SBS-SB0 | User Manual - Page 80
Appendix Troubleshooting I have difficulty hearing messages. • Press +/VOL to increase the speaker volume on the deskset. The answering system does not respond to remote access commands. • Make
Vtech SBS-SB0 | User Manual - Page 81
Appendix Maintenance Taking care of your telephone • Your deskset contains sophisticated electronic parts, so you must treat it with care. • Avoid rough treatment. • Place the corded handset down gently. • Save the original packing materials to protect your deskset if you ever need to ship it. Avoid
Vtech SBS-SB0 | User Manual - Page 82
Installation Instructions in the user's manual. The problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service phone. The term ''IC:'' before the certification/registration number only signifies that the Industry Canada
Vtech SBS-SB0 | User Manual - Page 83
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is undesired operation. Privacy of communications may not be ensured when using this phone. To ensure safety of users, the FCC has established criteria for
Vtech SBS-SB0 | User Manual - Page 84
to register. alternately. You hear a confirmation tone. If the deskset fails to enter this mode, repeat all the steps above. To activate the CEC battery charging testing mode: Register your deskset back to the CM18445/AM18447 console. See Add and register a deskset on page 8 for the instructions. 77
Vtech SBS-SB0 | User Manual - Page 85
instructions de ce guide d'utilisation. Relectez toutes les inscriptions apparaissant sur le produit. • Évitez d'utiliser le téléphone la section Dépannage (Troubleshooting) des pages 70-73 de ce guide d'utilisation. Si vous ou composez le 1-800-595-9511. Au Canada, composez le 1-800-267-7377. • N'
Vtech SBS-SB0 | User Manual - Page 86
ne servent plus, au sein du territoire des États-Unis et du Canada. Vous devez apporter ces piles chez un détaillant participant ou le centre lorsque celui-ci est en fonction. • Ils doivent utiliser le téléphone sans fil en l'appuyant sur l'oreille qui se trouve dans la CES INSTRUCTIONS 79
Vtech SBS-SB0 | User Manual - Page 87
operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. by anyone other than an authorized service representative of VTech; or • PRODUCT to the extent that the problem experienced is caused by signal
Vtech SBS-SB0 | User Manual - Page 88
service? To obtain warranty service, visit www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377. NOTE: Before calling for service, please review the user's manual not meet the terms of this limited warranty, VTech will notify you and will request that you authorize
Vtech SBS-SB0 | User Manual - Page 89
Technical specifications RF frequency band Channels Deskset voltage (AC voltage, 50/60Hz) Deskset voltage (AC adapter output) Optional backup batteries Headset jack 1921.536MHz - 1928.448MHz 5 100Vrms - 120Vrms 6VDC @ 600mA 2.4V 750mAh Ni-MH battery pack 2.5mm, 32ohm - 150ohm Operation with
Vtech SBS-SB0 | User Manual - Page 90
Index A Add a headset 9 Add a speed dial entry 42-43 Alert tones 17 Announcement 58-59 tone 20 L Language 21, 57 Lights 17 Limited warranty 80-81 Line indicators 25 Listening volume 27 M Mailbox setup 57-62 Maintenance 74 Make a call 25 Make an intercom call 36 Memo 65 Memory match 52 Menu settings
Vtech SBS-SB0 | User Manual - Page 91
29 Private mailbox 57-62 R Record a call 30 Redial 32-33 Register a deskset 8 Remaining message capacity 62 Remaining time 62 Remote access lines 28 System setup 18-24 T Technical specifications 82 Telephone operation 25-44 Temporary tone dialing 27 Transfer a call 38, 39 Troubleshooting 70-73 Two
Vtech SBS-SB0 | User Manual - Page 92
Music on hold feature: FreeMusicArchive.org. Used under open license. Designed to fit your home. And your life. VTech Communications, Inc. A member of THE VTECH GROUP OF COMPANIES. VTech is a registered trademark of VTech Holdings Limited. Specifications are subject to change without notice. © 2017