Vtech ev2625 User Manual
Vtech ev2625 - Cordless Phone - Operation Manual
 |
View all Vtech ev2625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Vtech ev2625 manual content summary:
- Vtech ev2625 | User Manual - Page 1
to an authorized service facility. Opening or removing cabinet parts other than specified instructions. Adjust only those controls that are covered by the operating instructions change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be - Vtech ev2625 | User Manual - Page 2
Important Safety Instructions VTECH COMMUNICATIONS INC. CUSTOMER SERVICE: 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. BEFORE USING YOUR ev 2625 SYSTEM, CAREFULLY PEEL OFF THE PROTECTIVE FILM COVERING THE DISPLAYS. 2 - Vtech ev2625 | User Manual - Page 3
Introduction This is an advanced cordless telephone, capable of supporting two Handsets. This manual is designed to familiarize you with this cordless telephone. We strongly recommend you read the manual before using your phone. 3 - Vtech ev2625 | User Manual - Page 4
, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. Note : Use only VTech batteries (part number 80-5380-00-00) or equivalent AAA NiMH rechargeable batteries. Base Unit Base AC Power Adapter Telephone Line Cord Handset x2 Handset Charger Belt Clip x2 User’s Manual 4 Battery Cells x6 - Vtech ev2625 | User Manual - Page 5
Handset Layout 1. Antenna 2. Volume Control 3. Speakerphone LED 4. CID (Scroll Down) 5. Select (Menu) 6. On (Flash) 7. Dialing Keys (0-9, , #) 8. Redial (Pause) 9. Mute (Delete) 10. Speakerphone 11. LCD Display 12. Headset jack (2.5mm) 13. Phonebook (Scroll Up) 14. Off (Clear) 15. Intercom 16. - Vtech ev2625 | User Manual - Page 6
To AC outlet 6 DC 9V TEL. LINE CORDLESS TELEPHONE VTECH TELECOMMUNICATIONS LTD. DC 9V 400mA CLASS 2 POWER SOURCE ONLY MODEL: 2625 VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com COMPLIES WITH 47 CFR PART 68 HAC REGISTRATION NO.: US - Vtech ev2625 | User Manual - Page 7
be used in your ev 2625 cordless telephone. Use only the batteries that came with your phone, or contact our Customer Support Center (contact information on page 2) to order additional batteries. Charging of the Handset Battery Cells The Handset of your cordless telephone is powered by rechargeable - Vtech ev2625 | User Manual - Page 8
Case of Difficulty. Tone/Pulse selection Your phone is preset for tone dialing. See Handset Settings for details. CAUTION: Use only the VTech power supply vided with your telephone. IMPORTANT: FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1. Choose a central location for your Base - Vtech ev2625 | User Manual - Page 9
LED CHARGING IN USE Description • On when the Handset is charging in the cradle. • On when the phone is off hook. • Flashes when an extension phone is off hook. • Flashes when the visual message waiting signal has been detected. Service must be subscribed through your local telephone company. 9 - Vtech ev2625 | User Manual - Page 10
the same for the Handset earpiece, Speakerphone and Headset. Flash Function • You can use your ev 2625 with services such as Call phone company subscriber services, as described by your provider. Redial Function • Press REDIAL• PAUSE to display the last telephone number dialed from the Handset - Vtech ev2625 | User Manual - Page 11
other Handset is out of range, or on an external call, when you intercom it, the display of the first handset Handset needs to talk with the receiving Handset before the external call is actually sent to the other Handset. 11 PHONE 00:00:15 MICROPHONE MUTED MUTE CALLING OTHER HANDSET OTHER HANDSET - Vtech ev2625 | User Manual - Page 12
call is put on hold automatically. • HS2 will ring, showing an intercom call. • HS2 can answer the intercom call by pressing ON. These two handsets (HS1 and HS2) can discuss the external call. • When HS1 presses OFF, the external call is then transferred to HS2. CALL TRANSFERRED will briefly - Vtech ev2625 | User Manual - Page 13
, you can use the PAGE key to locate the Handsets for 60 seconds. • When the Handset is in idle, press PAGE on Base Unit. The Handsets will display: • To end the page at the Base, press PAGE again. • To end the page from either Handset, press any dialing keys ON or SPEAKERPHONE. BASE IS - Vtech ev2625 | User Manual - Page 14
Your ev 2625 can store up to 50 numbers with names in memory. Each memory location can hold up to 32 digits for the number and up to 16 characters for the name. NOTE: The Handsets hold REDIAL.PAUSE to add pauses if necessary. >STORE REVIEW ENTER NUMBER 595-9511_ ENTER NAME _ PHONE BOOK IS FULL 14 - Vtech ev2625 | User Manual - Page 15
Basic Operation Phonebook Operation • If there is a duplicate number in the phonebook, the display will show: NUMBER ALREADY IN PHONE BOOK Each press of a particular key causes characters to be displayed in the following order: Key Characters by number of key presses 1 2 3 4 5 6 7 8 9 - Vtech ev2625 | User Manual - Page 16
With the REVIEW in the first line, press SEL again. - OR With the Handset idle, press and the Handset jumps directly into the phonebook review mode. The steps in Reviewing/ Dialing from the phonebook to reach the entry to be edited. VTech com 800-595-9511 VTech 595-9511 PHONE 00:00:10 John Smith - Vtech ev2625 | User Manual - Page 17
Entry • Follow the two steps in Reviewing/ Dialing from the Phone Book (see page 16) to reach the entry to be deleted. EDIT NUMBER 595-9511_ EDIT NAME VTech_ VTech 595-9511 VTech 595-9511 • Press DEL key to delete the entry. A confirmation tone will sound. • The Handset will then move to the next - Vtech ev2625 | User Manual - Page 18
WAITING CALLER ID These are subscription services, provided by most regional telephone service providers. You must subscribe to these services to get the benefits of these features. If you do not subscribe to Caller ID services, you can still use your ev 2625 and the other features it offers. Due - Vtech ev2625 | User Manual - Page 19
. >CALL LOG RINGER VOLUME VTech 595-9511 NEW 2/2311:59 AM Basic Operation Storing a Caller ID • Follow the steps in Reviewing Caller ID to scroll to private listing, the request will be rejected with the message: If the phone number already exists in the phonebook, the entry will not be stored, - Vtech ev2625 | User Manual - Page 20
+ number, number only.) press # repeatedly. The screen will cycle through the dialing options. VTech 595-9511 NEW 2/2311:59 AM Deleting Caller ID • Follow the steps in Reviewing Caller ID to scroll to the record to be deleted. VTech 595-9511 NEW 2/2311:59 AM • Press DEL key to delete the desired - Vtech ev2625 | User Manual - Page 21
volume. The current ring tone is played and the volume bar is increased/decreased each time the setting is adjusted. At the lowest setting, the Handset will not ring when a call comes in and the display will show: • Press SEL to confirm the setting. Ringer Tone • From the idle (OFF) mode - Vtech ev2625 | User Manual - Page 22
. • When the desired option is shown, press SEL to confirm your selection. Handset Name (preset as 'VTECH') It is possible to give each Handset its own unique name. The name is shown in the first line when the Handset is idle. The name can be a maximum of 16 characters in length. • From - Vtech ev2625 | User Manual - Page 23
Handset Settings Clear Message Waiting If, after reviewing all new voice mail messages, the Message Waiting alert still remains on the screen and the LED on Base is still flashing, you can manually • Press SEL to confirm your setting. NOTE: When the phone is set for pulse dial mode, it is possible to - Vtech ev2625 | User Manual - Page 24
this product. To purchase a Headset, call VTECH Customer Service at 1-800-595-9511. Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset. Connect the plug on the Headset cord to the jack (under a small rubber flap) on the cordless Handset. The plug should fit securely - Vtech ev2625 | User Manual - Page 25
the battery cells need charging. No Dial Tone • First check all the suggestions above. • If you still don't hear a dial tone, disconnect the Base Unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service - Vtech ev2625 | User Manual - Page 26
(in the order listed): 1. Disconnect the power to the Base. 2. Disconnect the Handset battery cells. 3. Wait a few minutes. 4. Connect power to the Base. 5. Re-install the battery cells. 6. Watch for Handset to display: "VTECH" or your own handset name. 26 AAddddiittiioonnaallIInnffoorrmmaattiioonn - Vtech ev2625 | User Manual - Page 27
Maintenance Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your - Vtech ev2625 | User Manual - Page 28
with operation instructions, This limited VTECH will return repaired or replacement products to you in working condition. VTECH will retain defective parts, modules, or equipment. Repair or replacement of Product, at VTECH service representative of VTECH; or 3. Product to the extent that the problem - Vtech ev2625 | User Manual - Page 29
VTECH service location along with a description of the malfunction or difficulty; 2. Include "valid proof of purchase" (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone - Vtech ev2625 | User Manual - Page 30
Inc CUSTOMER SERVICE at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. For repair/warranty information. The telephone company may ask you to disconnect this equipment from the line network until the problem has been corrected. FCC Part 15 Warning - Vtech ev2625 | User Manual - Page 31
product is equipped with a corded or cordless handset, it is hearing aid compatible. 6. Programming/testing of emergency numbers If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you - Vtech ev2625 | User Manual - Page 32
that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature morning or late evening, when the emergency services tend to be less busy. IC (Industry Canada) This telephone is registered for use in Canada. The - Vtech ev2625 | User Manual - Page 33
themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. Your phone is designed to operate at the maximum power allowed by the FCC and IC. This means your Handset and Base Unit can communicate only over a certain distance - which will depend on - Vtech ev2625 | User Manual - Page 34
) Base: 105mm x 100mm x 65mm Charger: 64mm x 78mm x 79mm WEIGHT Handset: 142 grams (excluding Battery Pack) Base: 129 grams Charger: 229 grams POWER REQUIREMENTS Handset: 1.2V AAA NiMH battery cell x 3 Base: 9V @ 400mA Charger: 9V @ 150mA MEMORY Phone Book: 50 memory locations; up to 32 digits, 16 - Vtech ev2625 | User Manual - Page 35
GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc.; Beaverton, Oregon. 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., 200-7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2003 for VTECH TELECOMMUNICATIONS LTD. Printed in China 91-005524-050-000 - Vtech ev2625 | User Manual - Page 36
Safety Instructions 1 Introduction 3 Parts Check List 4 Handset Layout 5 Base Unit Layout 6 Getting Started 6 Setup 6 Connecting Power to Base Unit/Handset Charger 6 Installation and Charge of Battery Cells in Handset 7 Charging of the Handset Battery Cells 7 Check Battery Indicator - Vtech ev2625 | User Manual - Page 37
Table of Contents Key Tone ...21 Handset Name ...22 Language ...22 Clear Message Waiting 23 Dial Type ...23 Advanced Operation 24 Headset Operation 24 Belt Clip...24 Additional Information 25 In Case Of Difficulty 25 Maintenance 27 Warranty Statement 28 FCC, ACTA and IC Regulations 30 - Vtech ev2625 | User Manual - Page 38
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
1
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury, including the following:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
4.
Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
5.
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6.
Slots and openings in the cabinet and the back or bottom are provided for ventilation.
To protect it from overheating, these openings must not be blocked by placing the
product on the bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat register. This product should not be placed in
a built-in installation where proper ventilation is not provided.
7.
This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
8.
Do not allow anything to rest on the power cord. Do not locate this product where
the cord will be abused by persons walking on it.
9.
Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to
an authorized service facility. Opening or removing cabinet parts other than specified
access doors may expose you to dangerous voltages or other risks. Incorrect
assembling can cause electric shock when the appliance is subsequently used.
11.
Do not overload wall outlets and extension cords as this can result in the risk of fire
or electric shock.
12
Unplug this product from the wall outlet and refer servicing to an authorized service
facility under the following conditions:
A.
When the power supply cord or plug is damaged or frayed.
B.
If liquid has been spilled into the product.
C.
If the product has been exposed to rain or water.
D.
If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions, because
improper adjustment of other controls may result in damage and will often require
extensive work to restore the product to normal operation.
E.
If the product has been dropped and the cabinet has been damaged.
F.
If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
14. Do not use this or any cordless telephone to report a gas leak in the vicinity of the
leak.
Important Safety Instructions