Western Digital WDG1S5000 Quick Install Guide (pdf)

Western Digital WDG1S5000 - My DVR Expander 500 GB External Hard Drive Manual

Western Digital WDG1S5000 manual content summary:

  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 1
    My DVR Expander™ Quick Install Guide
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 2
    Started Kit Contents • DVR Expander • eSATA cable • AC adapter • Quick Install Guide Handling Precautions CAUTION: This product contains no user-serviceable parts. Refer servicing only to authorized WD personnel or an authorized WD service center. • Do not drop or jolt the drive. • Do not use
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 3
    For a list of compatible TiVo DVRs, visit www.tivo.com/expand. 2. Connect the eSATA cable to the DVR Expander and TiVo® DVR. 3. Connect the AC power cord to the DVR Expander and electrical outlet. The power LED illuminates. 4. Wait approximately 15 seconds for the hard drive to reach operating speed
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 4
    the DVR and the DVR Expander. 1. Power off the compatible TiVo® DVR by disconnecting the AC power cord. 2. Disconnect the AC adapter cord and eSATA cable from the DVR Expander. 3. Plug in the DVR's power cord and follow the onscreen instructions. Temporarily Disconnecting the DVR Expander Follow
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 5
    DVR Expander external drive works with selected TiVo® DVRs. For details about compatibility with TiVo® DVRs, go to www.tivo.com/expand. Q: What interface do I use to connect the DVR Expander to the DVR? A: The only option for connecting the DVR Expander to a DVR is via an external SATA (eSATA) cable
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 6
    in your entertainment center. Q: How will I know when the DVR Expander drive is almost out of recording space? A: The TiVo® DVR uses the DVR Expander as if it were part of the internal hard drive. When trying to schedule the next recording, the DVR will provide an on screen warning if there is
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 7
    as it is not an adequate power source for external drives. 3. Connect the eSATA cable to the DVR Expander and DVR. 4. Power on the DVR. 5. Check the recording space on your DVR. If the DVR Expander was detected properly by the DVR, the percentage of used space should be decreased and the percentage
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 8
    Expander. 4. Securely reconnect the eSATA cable to the DVR Expander and reconnect to the DVR. 5. Reconnect the power adapter to the DVR Expander, and wait approximately 15 seconds for the drive to power on. 6. Reconnect the power cable to the DVR. If the procedure above does not resolve the problem
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 9
    DVR Expander compatible with any DVR? A: The DVR Expander external drive works with all Scientific Atlanta Explorer 8300 series DVRs. Q: What interface do I use to connect the DVR Expander to the DVR? A: The only option for connecting the DVR Expander to a DVR is via an external SATA (eSATA) cable
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 10
    programs. Q: What if my DVR malfunctions or my cable provider decides to upgrade or swap out my DVR with a new one? A: Any previously recorded content on your DVR Expander will not be available for viewing on your new DVR, and the DVR Expander will have to be reformatted before use, causing all
  • Western Digital WDG1S5000 | Quick Install Guide (pdf) - Page 11
    trademarks; and My DVR Expander is a trademark of Western Digital Technologies, Inc. TiVo is a registered trademark of TiVo Inc. or its subsidiaries in the United States and/or other countries. Other marks may be mentioned herein that belong to other companies. Specifications subject to change
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

My DVR Expander
Quick Install Guide