Whirlpool WRT541SZ Installation Instructions
Whirlpool WRT541SZ Manual
 |
View all Whirlpool WRT541SZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WRT541SZ manual content summary:
- Whirlpool WRT541SZ | Installation Instructions - Page 1
: #2 Phillips screwdriver Insert the setscrew and partially tighten (2 turns). Align handle, then tighten the screws and setscrew completely plus an additional quarter-turn. 6/14 ®/™ ©2014 Whirlpool. All rights reserved. Printed in Mexico - Whirlpool WRT541SZ | Installation Instructions - Page 2
Vis de blocage (2) Outils fournis : Clé à tête hexagonale de ⅛" (1) Conserver pour usage ultérieur Outils nécessaires : Tournevis Phillips n° 2 ®/™ ©2014 Whirlpool. Tous droits réservés. Insérer la vis de blocage et serrer partiellement (2 tours). Aligner la poignée, puis serrer complètement les
-
1 -
2
 |
 |
Install Door Handles
2
3
4
1
5
6
1
Remove the
fi
lm from the door.
2
Find door handles and installation kit inside refrigerator.
3
Align one of the handles with the door screws and push the
base
fi
rmly against the door. Partially tighten the screws
and the setscrew (2 turns).
4
Align handle, then tighten the screws and the setscrew
completely plus an additional quarter-turn.
5
Align the second handle with the door screws and push the
base
fi
rmly against the door. Partially tighten the screws (2
turns).
6
Insert the setscrew and partially tighten (2 turns). Align
handle, then tighten the screws and setscrew completely
plus an additional quarter-turn.
6/14
®
/™ ©2014 Whirlpool. All rights reserved.
Printed in Mexico
Tools Required
Parts Supplied:
Door handles (2), Screws (4), Setscrews (2)
Tools Supplied:
⅛
" Hex key (1)
Keep for future use.
Tools Needed:
#2 Phillips screwdriver
W10331018B