Yamaha ATS-1070 ATS-1070 Owners Manual
Yamaha ATS-1070 Manual
 |
View all Yamaha ATS-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha ATS-1070 manual content summary:
- Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 1
Front Surround System Owner's Manual UA English Français Español XXX EN - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 2
not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 3
instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha try to eliminate the problem by using one of the following measures Yamaha Corporation of America, Electronic Service The model number, serial number, power requirements, etc., may be found - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 4
you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the AC outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the wall AC outlet, the unit will not be disconnected - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 5
power immediately and unplug the power cord from the AC outlet. Then, request an inspection from the dealer where you purchased the unit or from qualified Yamaha service Install in the manner instructed in the manual. Falling or toppling may BURN HAZARD The remote control supplied with this product - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 6
an inspection from the dealer where you purchased the unit or from qualified Yamaha service personnel. 6 En CAUTION This content indicates "risk of injury." Power supply/power cord • Do not use an AC outlet where the power plug fits loosely when inserted. Failure to observe this may cause a fire - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 7
mounts the unit on a wall power and pull the power plug from the AC outlet and request an inspection from the dealer where you purchased the unit or from qualified Yamaha service the unit if the sound is distorting. Prolonged use remove the batteries from the remote control to prevent possible leakage - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 8
walls or desks, microwave ovens, or other wireless network devices. Obstructions could shorten the transmission distance. Connections • If connecting external units, be sure to thoroughly read the manual for each unit and connect them in accordance with the instructions on the power until it is - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 9
bass. About the name plate of the unit The model number, serial number, power requirements, etc., may be found on or near the name plate, which is serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 10
owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under constructor, builder and dealer that mount the unit on the wall • This manual uses the following signal words manual are for instructional purposes only. • The company names and product names in this manual - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 11
by TV's remote control (HDMI control 29 Listening to the sound from a Bluetooth device 30 Settings 33 Configuring the HDMI control function 33 Configuring HDMI audio output 33 Enabling/disabling the auto power standby function 34 Initializing the unit 34 Troubleshooting 35 Specifications - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 12
inserted into the remote control. Power cable Optical digital audio cable Analog audio cable (RCA plug (L/R)-3.5 mm mini plug cable) Spacers × 2 Use when mounting the unit on a wall 12 En Mounting template Use when mounting the unit on a wall Owner's Manual (this booklet) Quick Start Guide - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 13
Remove the battery's insulating strip before attempting to use the remote control. Operating range of the remote control Operate the remote control within the range as shown below. When the unit is mounted on a wall, point the remote control at the remote control sensor on the top panel (p. 17, 19 - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 14
Replacing the battery in the remote control Press and hold the release tab in the direction indicated by " , and slide the battery holder out in the direction indicated by # . Battery holder Release tab CR2025 Lithium battery 14 En - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 15
function Link TV and unit functions using the TV's remote control (p. 29). • Bluetooth connection Easily play content from a Bluetooth-compatible smartphone, tablet, or computer (p. 30). Our exclusive Compressed Music Enhancer technology improves sound quality and characteristics, and can be used to - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 16
A3 Yes. The unit can be operated with a smartphone using the free app, HOME THEATER CONTROLLER, installed on the smartphone (p. 32). In addition, the Bluetooth standby function can be used to turn on the unit when a Bluetooth connection between the unit and the smartphone is established, and to turn - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 17
operation and setting status. In this manual, illustrations of the nine in-line power standby function is enabled (p. 34). 6 Speakers 7 Dual built-in subwoofers The built-in subwoofers are located in the top part of the unit. 8 Remote control sensors Receive infrared signals from the remote - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 18
power cable of this unit (p. 24). 0 UPDATE ONLY jack Use to update this unit's firmware. Refer to the instructions supplied with the firmware for details. a SUBWOOFER OUT jack For connecting to an external subwoofer HDMI IN jack For connecting an HDMI-compatible playback device such as a BD/DVD - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 19
TV stand, etc. Position the unit with the touch panel facing up. Mounting the unit on a wall Refer to "Mount the unit on a wall" (p. 20) for instructions on mounting the unit on a wall so that the touch panel faces forward. Remote control sensor Touch panel NOTICE • Do not stack the unit and a BD - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 20
wall constructed of drywall (plasterboard). • Make sure you use commercially available screws that can support Yamaha will bear no responsibility for any accidents caused by improper installations. 1 Attach the mounting template on a wall and mark for the screw holes. Mounting template (supplied - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 21
3 Peel off the backing paper from the spacers and attach the adhesive face to the unit as illustrated below. Spacers 4 Hang the unit on the screws. Mounting holes on bottom of the unit Touch panel En 21 - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 22
optical digital audio cable (supplied) when connecting the unit to a TV that does not support Audio Return Channel. 1. Remove the cap 2. Check the direction of the plug Cable, satellite or network set-top box, or BD/DVD player HDMI OUTPUT 12 22 En SUBWOOFER ANALOG TV UPDATE OUT ONLY AC IN - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 23
audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit unit. AC IN SUBWOOFER ANALOG TV UPDATE OUT ONLY IN OUT(ARC) Analog audio cable (RCA plug (L/R)3.5 mm mini plug cable; supplied) Game console ANALOG - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 24
unit. Sound is output from both the built-in subwoofers and external subwoofer. d Connecting the power cable After all connections are complete, connect the supplied power cable to the AC IN jack on the unit and plug the power cable into an AC wall outlet. AC IN SUBWOOFER ANALOG TV UPDATE OUT - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 25
Remote control signal transmitter Transmits infrared signals. 1 (power) key Turns on or off the unit. Turned on The indicator for the last input source selected glows. Turned off (Bluetooth standby function enabled, p. 32) 2 Input keys Select an input source to be played back. HDMI Sound - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 26
. When 3D surround is selected, DTS Virtual:X makes it possible to hear sound not only from horizontal directions, but also from varying heights. Glows blue (3D surround mode can be selected using the HOME THEATER CONTROLLER app (p. 32) installed on a smartphone that supports the Bluetooth function. - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 27
Off (disabled) BASS EXTENSION key Enable/disable the bass extension function. When this function is enabled, you can enjoy more powerful sound. BASS Glows (enabled) EXTENSION BASS Off (disabled) EXTENSION 5 BLUETOOTH STANDBY key Hold down the key for more than 3 seconds to enable/disable the - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 28
Adjust the volume of the subwoofer. Volume down (-) Volume up (+) MUTE key Mute the audio output. Press the key again to unmute. Flash (on mute) VOLUME (+/-) keys Adjust the volume of the unit. Volume down (-) Volume up (+) Decoder indicator The unit supports the following audio signals. The - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 29
source switches to HDMI when the BD/DVD player is selected with the TV's remote control. • The input source can be switched while the unit is off. • Even if your TV supports the HDMI control function, some functions may not be available. For details, refer to documentation supplied with your TV. • We - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 30
to the sound from a Bluetooth device Audio from a Bluetooth device, such as a smartphone or a digital music player, can be played over a wireless connection. Bluetooth device 1 Press the BLUETOOTH key on the unit's remote control to select Bluetooth as the input source. The BLUETOOTH indicator on - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 31
displayed on the Bluetooth device, and the BLUETOOTH indicator on the unit glows. Terminating Bluetooth connection Bluetooth connection is terminated in the following cases. • The Bluetooth function is turned off on the compatible device. • The BLUETOOTH key on the unit's remote control is pressed - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 32
source.) Using the HOME THEATER CONTROLLER app When the free HOME THEATER CONTROLLER app is installed on a Bluetooth-compatible smartphone or other device, various operations (basic operation of the unit, selection of a surround mode, adjustment of sound settings, etc.) can be easily performed - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 33
function when connecting a TV that supports Audio Return Channel (ARC) (p. TV. Examples of TV settings • From the setup menu on your TV, select "Link setting" on again. - Disconnect the power cable of the unit and external Hold down the SURROUND key on the remote control for more than 3 seconds. HDMI - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 34
. • No operations for 8 hours • No audio input and no operations for 20 minutes when BLUETOOTH or HDMI is selected as the input source. 1 Turn off the unit. 2 Touch and hold and touch on the unit. The auto power standby function is enabled or disabled, and the unit turns on. The indicator shows - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 35
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 36
or to a drop in the power supply voltage. Another Bluetooth device is being operated nearby. The unit is blocking the TV's 3D glasses transmitter. The Bluetooth device on which the app has been installed is not connected to the unit. Remedy Unplug the power cable from the AC wall outlet and plug it - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 37
Problem No sound. No sound is coming from the subwoofer. The volume decreases when the unit is turned on. Cause Another input source is selected. The mute function is activated. The volume is too low. The power power cable of the unit is connected to an AC wall a TV that supports ARC (Audio Return - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 38
playback device is set to output 2 channel audio (such as PCM) only. Sound is also heard from the TV built-in speakers. The listening position is (p. 33). Remote control Problem The unit cannot be operated using the remote control. The TV cannot be operated using the TV's remote control. Cause - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 39
source (p. 30). Unpair the Bluetooth device that is currently connected, and pair with the desired Bluetooth device. Move the Bluetooth device closer to this unit. Do not use this unit near devices that emit electromagnetic waves. Use a Bluetooth device that supports the A2DP protocol. Delete the - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 40
OUT (ARC)) 1 (SUBWOOFER OUT) 1 Ver. 4.1 A2DP, SPP SBC, MPEG-4 AAC 2402 MHz to 2480 MHz 40 En Bluetooth General Item Maximum Output Power (EIRP) Bluetooth class Range (line-of-sight) Supported content protection method Power Supply Power Consumption Standby Power Consumption Specifications 20 dBm - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 41
Linear PCM Bitstream Audio signal formats 2ch, 32-96 kHz, 16/20/24 bit Dolby Digital, DTS Compatible media TV TV The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. En 41 - Yamaha ATS-1070 | ATS-1070 Owners Manual - Page 42
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Group © 2017 Yamaha Corporation Published 10/2017 KS-C0 Printed in China AV16-0017
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
 |
 |
UA
Front Surround System
Owner’s Manual
English
Français
Español
XXX
EN