Yamaha CLP820 Owners Manual

Yamaha CLP820 Manual

Get Yamaha CLP820 PDF manuals and user guides View all Yamaha CLP820 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha CLP820 manual content summary:

  • Yamaha CLP820 | Owners Manual - Page 1
    is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
  • Yamaha CLP820 | Owners Manual - Page 2
    located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. CLP-880/880M/880PE CLP-860/860M CLP-840 CLP-820 CLP-820S Model Serial No Purchase Date
  • Yamaha CLP820 | Owners Manual - Page 3
    serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. • Do not expose the instrument to rain, use all connected cables. • When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,
  • Yamaha CLP820 | Owners Manual - Page 4
    Thank you for choosing a Yamaha Clavinova. Your Clavinova is a fine musical instrument that employs advanced Yamaha music technology. With the proper care, your Clavinova will give you many years of musical pleasure. q Stereo sampling of the acoustic piano voices offers unmatched realism and
  • Yamaha CLP820 | Owners Manual - Page 5
    40 Troubleshooting 40 Options & Expander Modules 40 Demo Song List 41 Factory Setting List 42 MIDI Data Format 43 MIDI Implementation Chart 47 CLP-880: Keyboard Stand Assembly 48 CLP-860/840/820: Keyboard Stand Assembly 56 CLP-820S: Keyboard Stand Assembly 62 Specifications 68 CLP-880
  • Yamaha CLP820 | Owners Manual - Page 6
    REC ^ METRONOME FUNCTION PIANO SONG RECORDER 1 2 TEMPO FUNCTION SONG SELECT -/NO +/YES START/ STOP REC STEREO SAMPLING CLP-880 1 POWER A-1 CLP-820S). 2 [MASTER VOLUME] Control The [MASTER VOLUME] control adjusts the volume (level) of sound produced by the Clavinova's internal stereo
  • Yamaha CLP820 | Owners Manual - Page 7
    The Clavinova has a 2-track recorder, and these buttons are used to select the track(s) to be recorded or played back. See page 24 for details. * Pedals The soft (left), sostenuto (center) and damper (right) pedals (soft/sostenuto [left] and damper [right] in the case of the CLP-820S) provide
  • Yamaha CLP820 | Owners Manual - Page 8
    close the key cover: Gently lower the cover over the keys. Be careful to avoid catching your fingers when opening or closing the cover. s CLP-860/840/820 To open the key cover: ZLift the cover slightly (not too much). XSlide the cover open. To close the key cover: ZSlide the cover
  • Yamaha CLP820 | Owners Manual - Page 9
    , according to the position of the metal supports. Set the left and right metal supports to the same position. To lower the use the music stand in a half-raised position. When lowering the stand, do not release your hands from the music stand until it is all the way down. CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 10
    PC-2 PC-1 MIDI Mac TO HOST 2 3 4 5 1 AUX IN L/L+R and R Jacks These jacks are intended for use with an external tone generator module such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo by the Clavinova's volume and brilliance (CLP-880/860/840) controls. Reverb and effect (CLP-880/860/
  • Yamaha CLP820 | Owners Manual - Page 11
    Clavinova's AC cord is properly plugged into the Clavinova end of the keyboard will light (except for CLP-820S). MASTER VOLUME MAX MIN Set the Volume CLP-880 GRAND PIANO CLASSICAL JAZZ PIANO PIANO Select a Voice ... Select the desired voice by pressing one of the voice selectors. Use
  • Yamaha CLP820 | Owners Manual - Page 12
    use. • No MIDI reception occurs in the demo/piano song mode. • The demo/piano song data is not transmitted via the MIDI connectors. * See page 41 for a complete listing of the demo tunes. Voice Demo DEMO CLP-880 GRAND PIANO CLASSICAL JAZZ PIANO PIANO ROCK PIANO E. PIANO 1 E. PIANO featuring
  • Yamaha CLP820 | Owners Manual - Page 13
    piano song is automatically started in continuous play, the HALL 1 reverb type will automatically be selected. Exit From the Piano Song Mode Press the [PIANO SONG] button to exit from the piano song mode, the indicator will go off, and return to the normal play mode. CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 14
    The A-B Repeat function can be used to continuously repeat a specified phrase within a piano song. Combined with the Part Cancel function described below, this provides when a new song is selected. • The A-B Repeat function cannot be used during "ALL" or "rnd" playback. 14 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 15
    The Piano Song Part Cancel function cannot be used during "ALL" or "rnd" playback. • The "Piano Song Part Cancel Volume" function described on page 33 can be used to set the canceled part so piano song playback via the "Left Pedal Mode" function described on page 32. CLP-880/860/840/820/820S 15
  • Yamaha CLP820 | Owners Manual - Page 16
    PIANO E. PIANO 1 E. PIAN Voice numbering priority 123456 GRAND PIANO CLASSICAL JAZZ PIANO PIANO ROCK PIANO E. PIANO 1 E. PIANO used with another voice in the Dual Mode to produce a better "blend". NOTE • The dual and split modes (CLP The Clavinova Function mode CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 17
    the same time. SPLIT ZZ ANO ROCK PIANO E. PIA Selecting the Right and Left in this state the [VARIATION] button can be used to turn the variation for the Left Voice on (see below). Other Split Mode Functions The Clavinova Function mode provides access to a number of CLP-880/860/840/820/820S 17
  • Yamaha CLP820 | Owners Manual - Page 18
    Reverb The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power. ROOM HALL 1 HALL 2 STAGE REVERB To select a reverb type setting for the current voice (default depth settings are different for each voice). 18 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 19
    the current voice (the default depth settings are different for each voice). Brilliance (CLP-880/860/840) This control can be used to change the tonality or "timbre" of the sound output. The control range may become distorted. If so, lower the MASTER VOLUME level. CLP-880/860/840/820/820S 19
  • Yamaha CLP820 | Owners Manual - Page 20
    pressing the damper pedal down only part of the way. NOTE • On the CLP-880/860, soundboard depth and damper pedal mode (switch/ continuous) settings can be changed using the "Pedal Functions" (page 32) in the function mode. Sostenuto (Center) Pedal (except for CLP-820S If you play a note or chord
  • Yamaha CLP820 | Owners Manual - Page 21
    type is selected, the volume of notes played in the FIXED mode can be set by using the [-/NO] and [+/YES] buttons while the [TOUCH] button is held (the current Notes below and above the A-1 ... C7 range of the Clavinova sound one octave higher and lower, respectively. CLP-880/860/840/820/820S 21
  • Yamaha CLP820 | Owners Manual - Page 22
    (corresponding to the A3 note's Hz) range in approximately 0.2 Hertz intervals. Pitch control is useful for tuning the Clavinova to match other instruments or recorded music. A-1 B-1 C3 B3 SONG SELECT -/NO +/YES method is available in the Function mode - page 28. 22 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 23
    Clavinova built-in metronome is a convenient feature for practice, and it can also provide a solid rhythmic guide when recording using the Recorder feature the metronome can be set by using the [-/NO] and [+/YES] beats per minute by using the [TEMPO t/s] t/s] buttons are being used to adjust the tempo
  • Yamaha CLP820 | Owners Manual - Page 24
    the Recorder The Clavinova features a two-track recorder that let you record what you play on the keyboard and then play it back. Two tracks mean that you can "overdub" one part on top of another, using a different voice if you like. The recorder feature is a useful adjunct to any keyboard study
  • Yamaha CLP820 | Owners Manual - Page 25
    Using the Recorder maximum of about 10,000 notes on the CLP-880/ 860 or 5,000 notes on the CLP-840/820/820S, depending on pedal usage and other factors. The step 1 of the recording procedure are actually recorded by the Clavinova. These initial settings can be changed after the recording is finished
  • Yamaha CLP820 | Owners Manual - Page 26
    external MIDI storage device such as the Yamaha MIDI Data Filer MDF3 by using the Bulk Data Dump function described on "0" (i.e. the "Piano Song Part Cancel Volume" function - page 33 - only affects piano song playback. • The part anytime after you have started playing. 26 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 27
    indicator lights. NOTE • Functions cannot be selected during demo/piano song playback or when the recorder is in operation. X Use the FUNCTION [] buttons to select the desired function: F1 through F8 on the CLP-840/820/820S; F1 through F9 on the CLP-880/860. C In the case of the Scale (F2
  • Yamaha CLP820 | Owners Manual - Page 28
    the standard Equal Temperament tuning, the Clavinova includes 6 classic tunings that you can select and use to play music of the corresponding Temperament tuning, these classic tunings must be tuned to a specific key. Use the [-/NO] and [+/YES] buttons to select the key CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 29
    volume levels of the two voices combined in the dual mode can be adjusted as required by using this function. Use the [-/NO] and [+/YES] buttons to adjust the balance as required. The balance range is to recall the default setting (different for each voice combination). CLP-880/860/840/820/820S 29
  • Yamaha CLP820 | Owners Manual - Page 30
    be exited before EFFECT can be turned ON. F3.5: Reset (CLP-820/820S) ...F3.7: Reset (CLP-880/860/840) ...This function resets all dual-mode functions to method described on page 17, the split point can be set via this function. Use the [-/NO] and [+/YES] buttons to set the split point as required,
  • Yamaha CLP820 | Owners Manual - Page 31
    make it possible to individually set the depth of the effect for the Left and Right split-mode Voices. Use the [-/NO] and [+/YES] buttons to set the effect depth for the corresponding voice as required. The will appear on the display when all functions have been reset. CLP-880/860/840/820/820S 31
  • Yamaha CLP820 | Owners Manual - Page 32
    for song start/stop operation, or for sostenuto (CLP-820S only) operation. Use the [-/NO] and [+/YES] buttons to select piano voices (GRAND PIANO, CLASSICAL PIANO, and JAZZ PIANO) feature a special effect which recreates the ring of the strings and the soundboard resonance of an actual acoustic piano
  • Yamaha CLP820 | Owners Manual - Page 33
    default setting "10". F6 CLP-840/820/820S Piano Song Part Cancel Volume F7 CLP-880/860 Piano Song Part Cancel Volume This function sets the volume at which a "canceled" part is played during piano song playback (see page 15 for information on the "part-cancel" function). Use the [-/NO] and [+/ YES
  • Yamaha CLP820 | Owners Manual - Page 34
    CLP-840/820/820S MIDI Functions F8 CLP-880/860 MIDI Functions q A Brief Introduction to MIDI MIDI, the Musical Instrument Digital Interface, is a world- MIDI OUT MIDI Cable standard communication interface more. The Clavinova MIDI functions allow it to Clavinova be used in fairly sophisticated
  • Yamaha CLP820 | Owners Manual - Page 35
    reception of different parts on all 16 MIDI channels, allowing the Clavinova to play multi- can be selected on the Clavinova without affecting the external MIDI device. Use the [-/NO] and [+/YES Clavinova's voices, refer to page 44 in the MIDI Data Format section. CLP-880/860/840/820/820S 35
  • Yamaha CLP820 | Owners Manual - Page 36
    to a MIDI sequence recorder such as the Yamaha MIDI Data Filer MDF3 which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings and recording them on the MIDI or data reception occurs during a bulk data dump transmit operation. 36 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 37
    and Depth for each voice) • Effect (ON/OFF, Type, and Depth for each voice : CLP-880/860/840) • Variation (for each voice) • Touch Sensitivity (including the FIXED volume) • Metronome (Beat, Volume) • Piano Song Part Cancel Volume F8.2/F9.2: MIDI ...Turns backup of the MIDI functions listed below on
  • Yamaha CLP820 | Owners Manual - Page 38
    off on both the Clavinova and the computer, and check the cable connection and the position of PC-1", or "PC-2, no data transfer occurs via the MIDI connectors. To use the MIDI connectors for connection via a standard MIDI interface, set the HOST SELECT switch to "MIDI". 38 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 39
    Computer Connect the TO HOST connector of the Clavinova to the RS-232C port on your IBM computer, using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set the HOST SELECT switch to the "PC-2" position. Refer to your software owner's manual for information on any settings you might have
  • Yamaha CLP820 | Owners Manual - Page 40
    & Expander Modules q Options BC-8 Bench A comfortable bench styled to match your Yamaha Clavinova. HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads. KC-883 Key Cover (for the CLP-820S only) A convenient way to keep your keyboard clean and dust-free
  • Yamaha CLP820 | Owners Manual - Page 41
    PIANO CLASSICAL PIANO JAZZ PIANO ROCK PIANO E.PIANO 1* E.PIANO 2 HARPSICHORD STRINGS PIPE OPRGAN CHURCH ORGAN JAZZ ORGAN BASS CLP-880 CLP-860 CLP-840 CLP-820/820S Title par la loi sur les droits d'auteur (© 1998 par YAMAHA CORPORATION). • Algunas de las piezas de demostración arriba mencionadas
  • Yamaha CLP820 | Owners Manual - Page 42
    820/820S GRAND PIANO OFF - - Preset for each voice Preset for each voice Preset for each voice Preset for each voice MEDIUM 64 OFF 0 (no accent) 120 0 Backup Group CLP-880/860 CLP-840/820/820S F9.1 F8.1 - F9.1 - F9.3 - F8.1 - F8.3 "-": Not memorized Function CLP-880/860 CLP-840 CLP-820/820S
  • Yamaha CLP820 | Owners Manual - Page 43
    using a computer to control your music hardware with computergenerated MIDI messages, the data provided in this section can help you to control the Clavinova the supported CLP-880/860/840) ccH Parameter 5EH Effect4 Depth Data Range (vvH) 00H...7FH Si vous êtes très familier avec l'interface used
  • Yamaha CLP820 | Owners Manual - Page 44
    112 19 0 113 19 112 19 19 0 113 19 * Indicated as E. PIANO on the CLP-820/820S • When program change reception is turned OFF in the Function mode, no program turned off and an All Note Off occurs. 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Panel Data Transmit Data format: [F0H] -> [43H]
  • Yamaha CLP820 | Owners Manual - Page 45
    MIDI Format) Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H] F0H = Exclusive status 43H = Yamaha ID 73H = Clavinova ID xxH = Product ID (CLP-880/860/840/820/820S common ID: 50H or CLP common ID: 01H) nnH = Substatus nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk
  • Yamaha CLP820 | Owners Manual - Page 46
    (=Effect off) (CLP-880/860/840) 00 (CLP-880/860/840) MIDI Parameter Change table ( MULTI PART ) Address (H) Part Number Description 0 - 127 Default value (H) 7F (CLP-880/860/840) q Effect MIDI Map REVERB ROOM HALL 1 HALL 2 STAGE MSB LSB 02H 10H 01H 10H 01H 11H 03H 10H EFFECT (CLP
  • Yamaha CLP820 | Owners Manual - Page 47
    YAMAHA [Clavinova] Model: CLP-880/860/840/820/820S Function MIDI Implementation Chart Transmitted Recognized Basic Default Channel Changed 1 1~16 Mode Default Messages Altered 3 X 3: OMNI OFF, POLY Mode 2: OMNI ON, MONO Mode 4: OMNI OFF, MONO O: Yes X: No 47 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 48
    , reverse the assembly sequence given below. Have a Phillips-head (+) screwdriver ready. Z Open the box and remove all the parts. On opening the box you should find the parts shown in the illustration. Check to make sure that all the required parts are provided. 48 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 49
    screws 1 x It is not necessary to perform this procedure on the CLP-880PE. X Assemble the side panels (B) and feet (C). Secure the feet to perform this procedure on the CLP-880PE. C Attach (D). the side panels attached to the side panels (B), and attach using the four 6 x 20 millimeter round-head
  • Yamaha CLP820 | Owners Manual - Page 50
    horizontal play between the main unit and side panels, so center the main unit, as shown in illustration "b", then use the four 6 x 16 millimeter flat-head screws 5 to attach the main unit. Two screws can be attached from be extra careful so as not to drop the main unit. 50 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 51
    should face the rear of the main unit, as shown in the illustration), so don't try to force it in the wrong way around. 51 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 52
    onto the feet's protruding edge at the rear of the pedal box. Then, secure the top of the rear panel to the side panel brackets using two 4 x 12 mm round-head screws 3. Finally, secure the bottom of the rear panel to the pedal box
  • Yamaha CLP820 | Owners Manual - Page 53
    which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pin configuration of the AC wall outlets in your area. 53 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 54
    stable pedal operation and facilitates pedal effect control. If the adjuster is not in firm contact with the floor surface, distorted sound may result. 54 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 55
    any parts left over? ➔ Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? ➔ Move the Clavinova to an appropriate location. • Does the Clavinova make refer to the assembly diagrams and retighten all screws. 55 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 56
    cord 6 x 16 mm flat-head screws x4 5 CLP-860/840/820: Keyboard Stand Assembly The CLP-860/840/820 all require the same assembly procedures. Illustrations use the CLP-860 for reference. • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in
  • Yamaha CLP820 | Owners Manual - Page 57
    vinyl tie, you'll need it later in step N. Place the pedal box on top of the brackets attached to the side panels (D), and attach using the four 6 x 20 millimeter roundhead screws 2 - two screws on each side. Make sure the pedals extend in the same direction as the feet. 57
  • Yamaha CLP820 | Owners Manual - Page 58
    pedal box. Then, while eliminating any gaps between the rear and side panels, secure the top of the rear panel to the side panel brackets using two 4 x 12 mm round-head screws 3. Finally, secure the bottom of the rear panel to the pedal box
  • Yamaha CLP820 | Owners Manual - Page 59
    center the main unit to produce equal clearance on the left and right sides, as shown in the illustration), then use the four 6 x 16 millimeter flat-head screws 5 to attach the main unit. Two screws can be attached from , be extra careful so as not to drop the main unit. 59 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 60
    which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pin configuration of the AC wall outlets in your area. 60 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 61
    any parts left over? ➔ Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? ➔ Move the Clavinova to an appropriate location. • Does the Clavinova make refer to the assembly diagrams and retighten all screws. 61 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 62
    20 mm round-head screws x4 2 6 x 16 mm flat-head screws x8 3 q AC power cord CLP-820S: Keyboard Stand Assembly • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried
  • Yamaha CLP820 | Owners Manual - Page 63
    vinyl tie, you'll need it later in step N. Place the pedal box on top of the brackets attached to the side panels (D), and attach using the four 6 x 20 millimeter roundhead screws 2 - two screws on each side. Make sure the pedals extend in the same direction as the feet. 63
  • Yamaha CLP820 | Owners Manual - Page 64
    holes in the center-panel brackets over the lugs extending from the side panels, then slide down. Each side of the center panel is attached using two 6 x 16 flat-head screws 3. 64 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 65
    center the main unit to produce equal clearance on the left and right sides, as shown in the illustration), then use the four 6 x 16 millimeter flat-head screws 3 to attach the main unit. Two screws can be attached panels, be extra careful so as not to drop the main unit. 65 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 66
    which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pin configuration of the AC wall outlets in your area. 66 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 67
    any parts left over? ➔ Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? ➔ Move the Clavinova to an appropriate location. • Does the Clavinova make refer to the assembly diagrams and retighten all screws. 67 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 68
    20-1/4" x 40-1/16") WEIGHT CLP-880 70.0 kg (154.3 lbs.) CLP-880PE 82.0 kg (180.8 lbs.) 56.0 kg (123.4 lbs.) 56.0 kg (123.4 lbs.) 53.0 kg (116.8 lbs.) 48.0 kg (105.8 lbs.) • Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right
  • Yamaha CLP820 | Owners Manual - Page 69
    service this product beyond that de- scribed in the user-maintenance instructions. All other servicing should be referred to qualified service using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. 92-469-2 PLEASE KEEP THIS MANUAL 69 CLP-880/860/840/820/820S
  • Yamaha CLP820 | Owners Manual - Page 70
    instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use , Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of
  • Yamaha CLP820 | Owners Manual - Page 71
    30, 28001, Madrid, Spain Tel: 91-577-7270 GREECE Philippe Nakas S.A. Navarinou Street 13, P.Code 10680, Athens, Greece Tel: 01-364-7111 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 DENMARK YS Copenhagen Liaison Office Generatorvej 8B DK
  • Yamaha CLP820 | Owners Manual - Page 72
    M.D.G., EMI Division, Yamaha Corporation © 1998 Yamaha Corporation V320140 911POCP2.3-07D0 Printed in Japan This document is printed on chlorine free (ECF) paper.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
R
IMPORTANT
Check your power supply
Make sure that your local AC mains voltage matches the volt-
age specified on the name plate on the bottom panel. In some
areas a voltage selector may be provided on the bottom panel
of the main keyboard unit near the power cord. Make sure that
the voltage selector is set for the voltage in your area. The
voltage selector is set at 240V when the unit is initially
shipped. To change the setting use a “minus” screwdriver to
rotate the selector dial so that the correct voltage appears next
to the pointer on the panel.