Yamaha CRW4260T User Guide

Yamaha CRW4260T - CRW - CD-RW Drive Manual

Get Yamaha CRW4260T - CRW - CD-RW Drive PDF manuals and user guides View all Yamaha CRW4260T manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha CRW4260T manual content summary:

  • Yamaha CRW4260T | User Guide - Page 1
    CRW4260t SERIES User Guide Guide de I'utilisateur Bedienungsanleitung
  • Yamaha CRW4260T | User Guide - Page 2
    the appropriate retailer, please contact Yamaha Systems Technology, Inc. 100 Century Center Court, San Jose, CA95112, U.S.A. • This manual applies to the CRW4260t-B and CRW4260t-NB. The CRW4260t-B front panel displays the YAMAHA brand name. The CRW4260t-NB front panel does not display a brand
  • Yamaha CRW4260T | User Guide - Page 3
    Laser Diode Properties Material : GaAlAs Wavelength : 782-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.6 µW* * This output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 CAUTION Use of controls or
  • Yamaha CRW4260T | User Guide - Page 4
    WARNING f WARNING f • The temperature where CRW4260t is located should be between 5ºC and 40ºC (41ºF - 104ºF), when used in a fan-cooled system. • Do not disassemble the CRW4260t cover to reduce the risk of electric shock. • Always remove the disc before transporting CRW4260t. i
  • Yamaha CRW4260T | User Guide - Page 5
    CRW4260t contains no user serviceable parts. Refer all servicing to qualified personnel. • If any of the following should occur, the CRW4260t should be serviced not subject the CRW4260t and computer to impact or shock when in use, as this may impair recording or playback. • Yamaha is not responsible
  • Yamaha CRW4260T | User Guide - Page 6
    Discs 4 Chapter 2 - Installing the Yamaha CRW4260t Chapter 2 - Drive 5 CRW4260t drive settings 5 Installing the CRW4260t drive 8 Chapter 3 - Operation 13 Front Panel 13 Loading a Disc 14 Ejecting the Disc 15 Manual Eject (emergency use 16 Troubleshooting 17 Appendix 18 Specifications 18
  • Yamaha CRW4260T | User Guide - Page 7
    Introduction Thank you for purchasing a Yamaha CRW4260t drive. Please read this manual before using the drive in order to make the best use of the superior CRW4260t functions. After reading, please retain this manual for future reference. CRW4260t Features s 2xS Recording (Rewritable) - 4xS
  • Yamaha CRW4260T | User Guide - Page 8
    data later. Session at Once In this mode, data can be recorded to disc one session at a time. To use this mode, your software must support Session at Once recording. New sessions can be written later. Packet Writing This is useful for data back-up. Smaller units of data can be
  • Yamaha CRW4260T | User Guide - Page 9
    the list of included items. In order to use the CRW4260t, you will require the following. Computer The following operating -ROM. SCSI card This is required in order to connect a SCSI device (the Yamaha CRW4260t) to your computer. We recommend the following: Adaptec SCSI cards: AHA-2940 (PCI
  • Yamaha CRW4260T | User Guide - Page 10
    and parity settings etc.of the Yamaha CRW4260t drive. Phillips screwdriver Long nose pliers Discs On the CRW4260t, you can use conventional CD-RW and CD-R discs that conform to the Recordable Compact Disc Systems Part 2 and Part 3 (Orange Book). Yamaha recommends the following Yamaha CD-RW and CD
  • Yamaha CRW4260T | User Guide - Page 11
    the Yamaha CRW4260t Drive Chapter 2 - Installing the Yamaha CRW4260t Drive CRW4260t drive settings Before installing the CRW4260t in long-nose pliers to remove or insert jumper connectors. In the diagrams in this manual, solid black fill is used to indicate locations where a jumper is used
  • Yamaha CRW4260T | User Guide - Page 12
    2 - Installing the Yamaha CRW4260t Drive Note: When you are using Windows 95, and if the SCSI ID setting on the rear panel is the same as the number assigned to another SCSI device, the Plug and Play component of Windows 95 will automatically assign an unused number to the CRW4260t (SCAM protocol
  • Yamaha CRW4260T | User Guide - Page 13
    Chapter 2 - Installing the Yamaha CRW4260t Drive o Terminator setting The terminator setting indicates whether or not this device is the last connected SCSI device. Terminator ON (with a jumper) - Use this setting if the CRW4260t is the last device in the internal SCSI daisy-chain. Terminator OFF (
  • Yamaha CRW4260T | User Guide - Page 14
    2 - Installing the Yamaha CRW4260t Drive Installing the CRW4260t drive The following steps will differ slightly depending on the type of computer you are using. For details on removing the cover from your computer, and installing or removing internal devices, refer to the manual for your computer
  • Yamaha CRW4260T | User Guide - Page 15
    Chapter 2 - Installing the Yamaha CRW4260t Drive 4. Remove the front cover of a vacant half-height drive bay. For details refer to the manual of your computer. 5. Remove the SCSI card, and set the terminator setting of the SCSI internal circuit to the position for internal connected devices. For
  • Yamaha CRW4260T | User Guide - Page 16
    Chapter 2 - Installing the Yamaha CRW4260t Drive VZ49880-0 AUDIO OUT R G L 1 2 4 IPTBDAELORRSEIMCTLKIYNESACITTZOER VZ49880-0 of the cable (the larger connector) to the AUDIO OUT connector on the CRW4260t drive. The polarizing lug should be at the top. VZ49880-0 AUDIO OUT
  • Yamaha CRW4260T | User Guide - Page 17
    Chapter 2 - Installing the Yamaha CRW4260t Drive 9. Connect the power supply cable. Connect the +12V and +5V 4-pin power cable to the power supply interface located on the rear panel of the CRW4260t drive. The shape of the connector makes it impossible to reverse the connections. VZ49880-0 AUDIO
  • Yamaha CRW4260T | User Guide - Page 18
    Chapter 2 - Installing the Yamaha CRW4260t Drive 12. Connect the power cable to an AC outlet, and switch on your computer. Make sure that the LED located on the panel of the CRW4260t drive is lit. ON PUSH 13. Start up your operating system. For the procedure, refer to the manual for your operation
  • Yamaha CRW4260T | User Guide - Page 19
    the CRW4260t contains a disc. 5 READ/WRITE LED This indicator lights up in green when data is being read, and flashes when data is being accessed. It also lights up in orange when data is being recorded on a disc. 6 Eject button This button is used to open or close the tray. 7 Manual Eject
  • Yamaha CRW4260T | User Guide - Page 20
    Chapter 3 - Operation Loading a Disc 1. Press the eject button to open the tray. 2. Carefully place the disc, label-side up, on the disc tray. 3. Press the disc tray softly or press the eject button again to close the disc tray. 14
  • Yamaha CRW4260T | User Guide - Page 21
    on: Press the eject button to eject the disc. Note: You cannot eject the disc if the SCSI command prohibits the eject operation while the CRW4260t is reading data. Caution: Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected
  • Yamaha CRW4260T | User Guide - Page 22
    do this. A straightened paper clip makes an ideal tool. 1. Insert the pin-like tool into the manual eject hole and push gently. The spring-loaded mechanism ejects the disc. 2. After manually ejecting a disc, you must turn off the power supplied to the CRW4260t, then turn it on before continuing. 16
  • Yamaha CRW4260T | User Guide - Page 23
    Troubleshooting Troubleshooting If CRW4260t is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Symptoms Corrective action The power to the CRW4260t The CRW4260t does not operate correctly • Install the SCSI driver software
  • Yamaha CRW4260T | User Guide - Page 24
    Appendix Specifications Interface Data Capacity Record/Read Speed Data Transfer Rate Burst Transfer Rate Buffer Size Access Speed Installation Disc Loading Audio Out (normal speed) Power Consumption Power Supply Environment Dimensions (WxHxD) Weight SCSI 2 650MB (74 minutes) 550MB (63 minutes)
  • Yamaha CRW4260T | User Guide - Page 25
    Front Panel Indicator Key Appendix q on: green r on: orange 3 flashing: green 4 flashing: orange - off Status Reset Ready (no disc) Inserting disc Ejecting disc Ready (disc inserted) Seeking Preparing to write Writing Writing (test mode) Playback ON/DISC r « - r 3 « 4 4 q q q q q q Read/Write
  • Yamaha CRW4260T | User Guide - Page 26
    Technology, Inc. 100 Century Center Court, San Jose, CA 95112 U.S.A TEL: +1 408 467 2330 FAX: +1 408 437 8791 Internet: www.yamahayst.com ITALY Yamaha Musica Italia s.p.a. Keyboard & Multimedia Division Viale Italia 88, 20020, Lainate (Milano) ITALY TEL: +39 2 935771 FAX: +39 2 9370956 CANADA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
CRW4260t
SERIES
User Guide
Guide de I’utilisateur
Bedienungsanleitung